请朋友们帮帮!Dynamips 无法与主机通信!出现错误.请给我指错错误!谢谢!

eeliki

# Simple lab\r\n\r\n[localhost]\r\n\r\n    [[7200]]\r\n    image = \\Program Files\\Dynamips\\images\\c7200-jk9o3s-mz.124-7a.image\r\n    # On Linux / Unix use forward slashes:\r\n    # image = /opt/7200-images/c7200-jk9o3s-mz.124-7a.image\r\n    npe = npe-400\r\n    ram = 160\r\n        \r\n    [[ROUTER R1]]\r\n    s1/0 = R2 s1/0\r\n    F0/0=NIO_gen_etheviceNPF_{1A32A69F-4155-4133-B519-11CE0FF3A629}\r\n\r\n    [[router R2]]\r\n    \r\n    [[ethsw SW1]]\r\n    \r\n   \r\n    # No need to specify an adapter here, it is taken care of\r\n    # by the interface specification under Router R1\r\n\r\n\r\nReading configuration file...\r\n\r\n*** Warning:  received dynamips error:\r\n        206-unable to create VM instance \'R2\'\r\n*** Warning:  Connecting R1 s1/0 to R2 s1/0 resulted in:\r\n        nonexistent device R2\r\n*** Warning:  Connecting R1 F0/0 to NIO_gen_etheviceNPF_{1A32A69F-4155-4133-B5\r\n19-11CE0FF3A629} resulted in:\r\n        206-unable to create generic ethernet NIO\r\n\r\n*** Error:  errors during loading of the topology file, please correct them\r\nPress ENTER to continue

ssffzz1

1、首先确认你这个是WIN的配置，还是LINUX的配置。\r\n2、请到netemu去参考DYNAMIPS教程，来设置正确的ETH号码。