关于nat转换的问题

jozn

有一台2600路由器， 想让所有的电脑通过它来访问internet。\r\n\r\n外网的线接f0/0口，有固定ip\r\n\r\n内网接f0/1口\r\n\r\n\r\n在2600上配置net转换，可是不成功啊，向大家请教，是不是配置错误啊！！\r\n\r\nip ssh version 1\r\n!\r\n!\r\ninterface FastEthernet0/0\r\n ip address 200.2.2.18 255.255.255.252\r\n ip nat outside\r\n duplex auto\r\n speed auto\r\n!\r\ninterface FastEthernet0/1\r\n ip address 192.168.1.1 255.255.255.0\r\n ip nat inside\r\n duplex auto\r\n speed auto\r\n!\r\nip nat pool test 200.2.2.19 200.2.2.19 netmask 255.255.255.252\r\nip nat inside source list 1 interface FastEthernet0/1 overload\r\nip classless\r\n!\r\n!\r\naccess-list 1 permit 192.168.1.0 0.0.0.255\r\n!\r\n!\r\n!\r\nline con 0\r\nline vty 0 4\r\n login\r\n!\r\n!\r\nend\n\n[ 本帖最后由 jozn 于 2009-9-13 10:06 编辑 ]

ssffzz1

外加配置错误。\r\n!\r\nip nat pool test 200.2.2.19 200.2.2.19 netmask 255.255.255.252\r\nip nat inside source list 1 interface FastEthernet0/1 overload\r\nip classless\r\n!