请问在两台AIX小机上搭建HACMP5.2并行服务器中的错误，请指教

外行人

两台P55A，ds4300，AIX5305，HACMP5209，配置完HACMP，同步是有些Error和Warnning，请大家指教\r\n\r\n\r\n错误！！！\r\n\r\n                                COMMAND STATUS\r\n\r\nCommand: failed        stdout: yes           stderr: no\r\n\r\nBefore command completion, additional instructions may appear below.\r\n\r\n[MORE...58]\r\nVerifying Cluster Resources...\r\n\r\nprocessing RG: lhdb1_cas\r\nprocessing RG: lhdb2_cas\r\nprocessing RG: lhdb_con\r\nA corrective action is available for the condition reported below:\r\n\r\nERROR: The HACMP timestamp file for shared volume group: oradatavg is inconsiste\r\nnt\r\nwith the time stamp in the VGDA for the following nodes: lhdb1 lhdb2\r\n\r\nTo correct the above condition, run verification & synchronization with\r\n[MORE...24]\r\n\r\n\r\n\r\n\r\n\r\n                                 COMMAND STATUS\r\n\r\nCommand: failed        stdout: yes           stderr: no\r\n\r\nBefore command completion, additional instructions may appear below.\r\n\r\n[MORE...23]\r\nrecommended for networks that will use IP aliasing.\r\n\r\nERROR: Service adapter lhdb2_svc on network net_ether_01 is on the same\r\nsubnet as at least one of the communication interfaces on this network.\r\nService labels must be on a different subnet when the network is configured\r\nto use IP aliasing for IP address takeover.\r\nERROR: Service adapter lhdb1_svc on network net_ether_01 is on the same\r\nsubnet as at least one of the communication interfaces on this network.\r\nService labels must be on a different subnet when the network is configured\r\nto use IP aliasing for IP address takeover.\r\nERROR: Service adapter lhdb2_svc on network net_ether_01 is on the same\r\nsubnet as at least one of the communication interfaces on this network.\r\n[MORE...59]\r\n\r\n\r\n\r\n\r\n\r\n告警！！！\r\n\r\n\r\n\r\n                                 COMMAND STATUS\r\n\r\nCommand: failed        stdout: yes           stderr: no\r\n\r\nBefore command completion, additional instructions may appear below.\r\n\r\n[MORE...7]\r\nVerifying Cluster Topology...\r\n\r\nWARNING: There may be an insufficient number of communication interfaces defined\r\non node: lhdb1, network: net_ether_01. Multiple communication interfaces are\r\nrecommended for networks that will use IP aliasing.\r\n\r\nWARNING: There may be an insufficient number of communication interfaces defined\r\non node: lhdb2, network: net_ether_01. Multiple communication interfaces are\r\nrecommended for networks that will use IP aliasing.\r\n\r\nWARNING: There may be an insufficient number of communication interfaces defined\r\non node: lhdb1, network: net_ether_010. Multiple communication interfaces are\r\n[MORE...75]\r\n\r\n\r\n\r\n\r\n                                 COMMAND STATUS\r\n\r\nCommand: running       stdout: yes           stderr: no\r\n\r\nBefore command completion, additional instructions may appear below.\r\n\r\n[MORE...79]\r\nto access cluster verification and synchronization with corrective actions.\r\n-----------------------------------------------------------------\r\n\r\nWARNING: Only one node: lhdb1  was defined for resource group: lhdb1_cas.\r\n\r\nWARNING: Only one node: lhdb2  was defined for resource group: lhdb2_cas.\r\n\r\n\r\nVerification exiting with error count: 5\r\n\r\ncldare: Failures detected during verification.  Please correct\r\nthe errors and retry this command.\r\n\r\nVerification has completed normally.\r\n\r\n\r\n\r\n\r\n\r\n\r\n                                 COMMAND STATUS\r\n\r\nCommand: failed        stdout: yes           stderr: no\r\n\r\nBefore command completion, additional instructions may appear below.\r\n\r\n[MORE...45]\r\nWARNING: File \'netmon.cf\' is missing or empty on node lhdb2. This file is needed\r\nfor a cluster with the single-adapter network net_ether_010. Please create \'net\r\nmon.cf\' file on node lhdb2 as described in \'HACMP Planning and Installation Guid\r\ne\'.\r\nWARNING: File \'netmon.cf\' is missing or empty on node lhdb1. This file is needed\r\nfor a cluster with the single-adapter network net_ether_01. Please create \'netm\r\non.cf\' file on node lhdb1 as described in \'HACMP Planning and Installation Guide\r\n\'.\r\nWARNING: File \'netmon.cf\' is missing or empty on node lhdb2. This file is needed\r\nfor a cluster with the single-adapter network net_ether_01. Please create \'netm\r\non.cf\' file on node lhdb2 as described in \'HACMP Planning and Installation Guide\r\n\'.\r\n[MORE...37]

外行人

第一个解决了，谁能说说第二个错误啊？\r\n\r\nBoot IP不能和Service IP一个网段吗？

流浪人生

Service labels must be on a different subnet when the network is configured\r\nto use IP aliasing for IP address takeover\r\n\r\n这么清楚地信息  不使用IPAT就可以