新手请教：修改了网关后没有生效，仍然是旧的地址，咋办？

KD

请教，谢谢！\r\n用root 登录系统，以smitty tcpip进入最小配置，修改网关后出现以下提示：\r\nChecking for srcmstr active...complete\r\nStarting tcpip daemons:\r\n0513-029 The syslogd Subsystem is already active.\r\nMultiple instances are not supported.\r\n0513-029 The sendmail Subsystem is already active.\r\nMultiple instances are not supported.\r\n0513-029 The portmap Subsystem is already active.\r\nMultiple instances are not supported.\r\n0513-029 The inetd Subsystem is already active.\r\nMultiple instances are not supported.\r\n0513-029 The snmpd Subsystem is already active.\r\nMultiple instances are not supported.\r\n0513-029 The hostmibd Subsystem is already active.\r\nMultiple instances are not supported.\r\n0513-029 The snmpmibd Subsystem is already active.\r\nMultiple instances are not supported.\r\n0513-029 The aixmibd Subsystem is already active.\r\nMultiple instances are not supported.\r\n0513-029 The aixmibd Subsystem is already active.\r\nMultiple instances are not supported.\r\n0513-029 The muxatmd Subsystem is already active.\r\nMultiple instances are not supported.\r\nFinished starting tcpip daemons.\r\n\r\n退出后仍然是旧的网关地址。

*Daemon*

netstat -rn 看看是否有多个 Route\r\n\r\n如果多个，那就删掉多余的看看。\r\n\r\n或者条件允许的话，把网卡删掉，重新识别，重新按照要求配置一下。

hello_unix

别配多个网管\r\n如果有两个网卡,注意两个网卡的IP地址不要在一个网段里

KD

好，我先试一试。谢谢！

KD

好，我先试一试。谢谢！

KD

好的，试一试，谢谢