vg没有自动激活，文件系统没有自动mount,errpt如下：

dorland

vg已经设成重新启动自动激活，文件系统也已经设成自动mount了\r\nLABEL:          SRC_TRYX\r\nIDENTIFIER:     1BA7DF4E\r\n\r\nDate/Time:       Wed Sep 28 18:37:40 BEIS\r\nSequence Number: 1484\r\nMachine Id:      0032BF4B4C00\r\nNode Id:         P690_A2\r\nClass:           S\r\nType:            PERM\r\nResource Name:   SRC             \r\n\r\nDescription\r\nSOFTWARE PROGRAM ERROR\r\n\r\nProbable Causes\r\nAPPLICATION PROGRAM\r\n\r\nFailure Causes\r\nSOFTWARE PROGRAM\r\n\r\n        Recommended Actions\r\n        DETERMINE WHY SUBSYSTEM CANNOT RESTART\r\n\r\nDetail Data\r\nSYMPTOM CODE\r\n       65280\r\nSOFTWARE ERROR CODE\r\n       -9020\r\nERROR CODE\r\n           0\r\nDETECTING MODULE\r\n\'srchevn.c\'@line:\'343\'\r\nFAILING MODULE\r\nIBM.CSMAgentRM\r\n\r\nlssrc -s IBM.CSMAgentRM发现没有启动，startsrc -s IBM.CSMAgentRM可以正常启动，IBM.CSMAgentRM是干什么用的呢？是因为IBM.CSMAgentRM没有启动才导致文件系统不能自动mount吗？如何让下次启动的时候自动启动IBM.CSMAgentRM呢？

dorland

[quote]原帖由 \"dorland\"]ssrc -s IBM.CSMAgentRM发现没有启动，startsrc -s IBM.CSMAgentRM可以正常启动，IBM.CSMAgentRM是干什么用的呢？是因为IBM.CSMAgentRM没有启动才导致文件系统不能自动mount吗？如何让下次启动的时候自动启动IBM.CSM..........[/quote 发表：\n\r\n\r\n还是这个错误信息和文件系统没有自动mount没有任何关系？

dorland

原帖由 \"dorland\" 发表：\n\r\n\r\n还是这个错误信息和文件系统没有自动mount没有任何关系？

\r\n\r\n没人碰到过类似的问题啊？

aaaix

you can check a few things, such as lsdev, lspv and see if the disk are available. if everythign looks normal, the vg didn\'t auto mount, you should manually mount each of the file system. I guess the system will tell you cannot mount, because.... metadata or something corrupted or not clean, do fsck. \r\nif your file systems are not share file systems, no clustering, then do fsck, if it is, then mmfsck...\r\n\r\nit may be something else, but if i were you, i would have checked different places, and tried manually mount it and see what happen. \r\n\r\nabove error messages from the errpt, that you pasted here is not related to your mount problem.