NIM的报错信息

forwxh

请达人看一下NIM的错误日志,HACMP中error code 为864D2CE3,在上周五报错:9F3821FD后,前者不再报错,详细日志:\r\n---------------------------------------------------------------------------\r\nLABEL:          TS_NIM_ERROR_STUCK_\r\nIDENTIFIER:     864D2CE3\r\n\r\nDate/Time:       Tue Jan 16 12:11:17 BEIST 2007\r\nSequence Number: 2501\r\nMachine Id:      00CF86BD4C00\r\nNode Id:         HQs_ATII_B\r\nClass:           S\r\nType:            PERM\r\nResource Name:   topsvcs         \r\n\r\nDescription\r\nNIM thread blocked\r\n\r\nProbable Causes\r\nA thread in a Topology Services Network Interface Module (NIM) process\r\nwas blocked\r\nTopology Services NIM process cannot get timely access to CPU\r\n\r\nUser Causes\r\nExcessive memory consumption is causing high memory contention\r\nExcessive disk I/O is causing high memory contention\r\n\r\n        Recommended Actions\r\n        Examine I/O and memory activity on the system\r\n        Reduce load on the system\r\n        Tune virtual memory parameters\r\n        Call IBM Service if problem persists\r\n\r\nFailure Causes\r\nExcessive virtual memory activity prevents NIM from making progress\r\nExcessive disk I/O traffic is interfering with paging I/O\r\n\r\n        Recommended Actions\r\n        Examine I/O and memory activity on the system\r\n        Reduce load on the system\r\n        Tune virtual memory parameters\r\n        Call IBM Service if problem persists\r\n\r\nDetail Data\r\nDETECTING MODULE\r\nrsct,nim_control.C,1.39.1.12,5688             \r\nERROR ID \r\n6XnGH40Z/3f3/tK3/9.ou8....................\r\nREFERENCE CODE\r\n                                          \r\nThread which was blocked\r\nreceive thread\r\nInterval in seconds during which process was blocked\r\n           9\r\nInterface name\r\ntty0\r\n\r\n-------------------------\r\n---------------------------------------------------------------------------\r\nLABEL:          TS_NIM_ERROR_TRAF_E\r\nIDENTIFIER:     9F3821FD\r\n\r\nDate/Time:       Fri Jan 19 15:38:29 BEIST 2007\r\nSequence Number: 22659\r\nMachine Id:      00CF86BD4C00\r\nNode Id:         HQs_ATII_B\r\nClass:           S\r\nType:            PERM\r\nResource Name:   topsvcs         \r\n\r\nDescription\r\nNIM excessive packet traffic\r\n\r\nProbable Causes\r\nTopology Services Network Interface Module (NIM) error:\r\nToo much outbound packet traffic\r\nSend thread is blocked\r\nToo much inbound packet traffic\r\n\r\nFailure Causes\r\nNo IP connection remains: Group Services traffic using non-IP link\r\nExcessive message traffic created by Group Services or application\r\nSend thread blocked while sending a packet\r\nNon-IP link is too slow for the Group Services traffic\r\n\r\n        Recommended Actions\r\n        Ensure the IP connections are working\r\n        Use a faster baud rate if RS232 device in use\r\n        Use a faster non-IP connection between nodes\r\n        Send thread blocked: terminate NIM process\r\n        Call IBM Service if problem persists\r\n\r\nDetail Data\r\nDETECTING MODULE\r\nrsct,nim_control.C,1.39.1.12,5718             \r\nERROR ID \r\n6x50CT0pJ5g3/9uE09.ou8....................\r\nREFERENCE CODE\r\n                                          \r\n1: input traffic   0: output traffic\r\n           0\r\nError detailed information\r\nvalue1: queue size\r\nError data 1\r\n        2000\r\nError data 2\r\n           0\r\nInterface name\r\ntty0\r\n\r\n------------------\r\n谢谢!!!!!!!!!

forwxh

自己UP...\r\n大家看下哪

hp9000a

在HACMP，把RS232速率搞低一些！\r\n看看RSCT的软件包的补丁打了没有