免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
12下一页
最近访问板块 发新帖
查看: 8804 | 回复: 12
打印 上一主题 下一主题

如何更改hdisk的号码 [复制链接]

论坛徽章:
0
跳转到指定楼层
1 [收藏(0)] [报告]
发表于 2008-04-15 08:54 |只看该作者 |倒序浏览
有两台h85,连到一个7133,都能识别到两个hdisk,但是顺序不一样,由于安装rac的需要,需要hdisk的顺序一致,即如何在一台h85上将hdisk2该为hdisk3。\r\n我多次删除hdisk,重新识别都不可以。

论坛徽章:
0
2 [报告]
发表于 2008-04-15 09:11 |只看该作者
lsdev -Cc disk 贴出来

论坛徽章:
0
3 [报告]
发表于 2008-04-15 09:14 |只看该作者
可以造一个假的,呵呵

论坛徽章:
0
4 [报告]
发表于 2008-04-15 09:20 |只看该作者
erpapp:/dev#lsdev -Cc disk\r\nhdisk0 Available 40-60-00-4,0 16 Bit LVD SCSI Disk Drive\r\nhdisk1 Available 40-60-00-8,0 16 Bit LVD SCSI Disk Drive\r\nhdisk2 Available 11-08-L      SSA Logical Disk Drive\r\nhdisk3 Available 11-08-L      SSA Logical Disk Drive\r\n\r\nerpapp:/dev#lspv\r\nhdisk0          000ca3ff00085d46                    rootvg          active\r\nhdisk1          000ca3fff9d38327                    rootvg          active\r\nhdisk2          000ca40fadf246f6                    None\r\nhdisk3          000ca40fa599fec1                    None\n\n[ 本帖最后由 dhm007 于 2008-4-15 09:40 编辑 ]

论坛徽章:
0
5 [报告]
发表于 2008-04-15 09:38 |只看该作者
dserp:/#lsdev -Cc disk\r\nhdisk0 Available 40-60-00-4,0 16 Bit LVD SCSI Disk Drive\r\nhdisk1 Available 40-60-00-8,0 16 Bit LVD SCSI Disk Drive\r\nhdisk2 Available 11-08-L      SSA Logical Disk Drive\r\nhdisk3 Available 11-08-L      SSA Logical Disk Drive\r\n\r\ndserp:/#lspv\r\nhdisk0          000ca40f6be189fd                    rootvg          active\r\nhdisk1          000ca40ffa2a0ac7                    rootvg          active\r\nhdisk2          000ca40fa599fec1                    datavg\r\nhdisk3          000ca40fadf246f6                    appvg

论坛徽章:
0
6 [报告]
发表于 2008-04-15 09:43 |只看该作者
只要pvid一致,共享vg的major number保持一致就可以吧

论坛徽章:
0
7 [报告]
发表于 2008-04-15 10:00 |只看该作者
我查了metalink,里面有这样一段话,不是很懂。\r\nNote, the disk and its PVID must be visible and consistent between nodes. If the device name associated with the PVID for a disk that you want to use is different on any node, you must create a new device file for the disk on each of the nodes using a common unused name. In this case, create a dummy disk; e.g., hdisk99 using the mknod command on both the nodes with the minor and major number of the actual disk being used for OCR or voting disk. This will ensure the disk name being same across all the nodes.\r\n\r\n如何用mknod建立一个a dummy disk?\n\n[ 本帖最后由 dhm007 于 2008-4-15 10:02 编辑 ]

论坛徽章:
0
8 [报告]
发表于 2008-04-15 10:12 |只看该作者
怎么将pdisk加到指定的hdisk?

论坛徽章:
0
9 [报告]
发表于 2008-04-15 10:25 |只看该作者
两边都删除,重新自动认,终于一致了

论坛徽章:
0
10 [报告]
发表于 2008-04-15 13:45 |只看该作者
貌似与楼主需求不符~\r\n\r\n呵呵,参考下思路即可。
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP