请问绑定两个网卡后如何查看mac地址

liangadty

看到的mac地址只有1个，就是eth0的地址，eth1的地址没有在这里显示回复 9# q1208c


   

q1208c

回复 11# liangadty


那只能读 proc 了.

nhjiw

在/etc/udev/rules.d/70-persistent-net.rules中存储的有。

yoyosys

]# cat /proc/net/bonding/bond0
Ethernet Channel Bonding Driver: v3.6.0 (September 26, 2009)

Bonding Mode: fault-tolerance (active-backup)
Primary Slave: None
Currently Active Slave: eth0
MII Status: up
MII Polling Interval (ms): 100
Up Delay (ms): 0
Down Delay (ms): 0

Slave Interface: eth0
MII Status: up
Link Failure Count: 0
Permanent HW addr: 00:50:56:ab:2b:89
Slave queue ID: 0

Slave Interface: eth1
MII Status: up
Link Failure Count: 0
Permanent HW addr: 00:50:56:ab:32:84
Slave queue ID: 0

liangadty

yoyosys 发表于 2012-11-26 10:24
]# cat /proc/net/bonding/bond0
Ethernet Channel Bonding Driver: v3.6.0 (September 26, 2009)

这种方法可以！！！谢谢！！

liangadty

回复 13# nhjiw


    没有这个文件！！

nhjiw

应该是在/etc/udev/rules.d/70-persistent-net.rules