- 论坛徽章:
- 0
|
[mp00226410215d] MP> cm
Enter HE to get a list of available commands
(Use ^B to return to main menu.)
[mp00226410215d] MP:CM> ps
Display detailed status of the selected MP bus device.
The following MP bus devices were found:
+---+----+----+-----+-----+-------+-----+
| | | | | | | |
| | |LAN\| Sys | | IO | |
|Cab| MP |SCSI|Bkpln|Cells|Chassis| BPS |
| # |M S|0 1| | 0 1 | 0 1 | 0 1 |
+---+----+----+-----+-----+-------+-----+
| 0 |* | | * | * * | * * | * * |
+---+----+----+-----+-----+-------+-----+
You may display detailed power and hardware status for the following items:
T - Cabinet
S - System Backplane
G - MP (Core I/O)
P - IO Chassis
C - Cell
Select Device: c
Enter cell number: 1
HW status for Cell 1 : FAILURE DETECTED
Power status : on, no fault
Faults above are latched. They are cleared just before the cell is powered on.
Boot is blocked
PDH memory is not shared
Processor Compatibility : OK
RIO cable status : connected
RIO cable connection physical location : PCI Domain 1
Core cell is INVALID
Attention Led is off
PDHC status Leds : --**
CPU Module Slot 0 1 2 3
Populated P
Local 48V Good *
Power Enabled *
Power Good *
(* - True, P - Processor, T - Terminator)
| DIMM Presence |
| |
| Side: | A | B |
|Echelon: |01234567|01234567|
+---------+--------+--------+
| |** ** |
1 1 1 1 1 1
VRM's 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5
Present : * * * * * * * * * * * * * * * *
Enabled : * * * * * * * * * * * * * * * *
Pwr Good : * * * * * * * * * * * * * * * *
Front Side Bus Freq. : 267 MHz
CPU Core Freq. : 1600 MHz
CPU Part Number : 80567KE
System Boot Rom (SFW) firmware rev 009.022.000
PDH controller (PDHC) firmware rev B.023.003.040 built SUN AUG 05 21:53:18 2007
[mp00226410215d] MP:CM> ps
Display detailed status of the selected MP bus device.
The following MP bus devices were found:
+---+----+----+-----+-----+-------+-----+
| | | | | | | |
| | |LAN\| Sys | | IO | |
|Cab| MP |SCSI|Bkpln|Cells|Chassis| BPS |
| # |M S|0 1| | 0 1 | 0 1 | 0 1 |
+---+----+----+-----+-----+-------+-----+
| 0 |* | | * | * * | * * | * * |
+---+----+----+-----+-----+-------+-----+
You may display detailed power and hardware status for the following items:
T - Cabinet
S - System Backplane
G - MP (Core I/O)
P - IO Chassis
C - Cell
Select Device: c
Enter cell number: 0
HW status for Cell 0 : FAILURE DETECTED
Power status : on, no fault
Faults above are latched. They are cleared just before the cell is powered on.
Boot is blocked
PDH memory is shared
Processor Compatibility : OK
RIO cable status : connected
RIO cable connection physical location : PCI Domain 0
Core cell is INVALID
Attention Led is off
PDHC status Leds : -***
CPU Module Slot 0 1 2 3
Populated P
Local 48V Good *
Power Enabled *
Power Good *
(* - True, P - Processor, T - Terminator)
| DIMM Presence |
| |
| Side: | A | B |
|Echelon: |01234567|01234567|
+---------+--------+--------+
| |** ** |
1 1 1 1 1 1
VRM's 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5
Present : * * * * * * * * * * * * * * * *
Enabled : * * * * * * * * * * * * * * * *
Pwr Good : * * * * * * * * * * * * * * * *
Front Side Bus Freq. : 267 MHz
CPU Core Freq. : 1600 MHz
CPU Part Number : 80567KE
System Boot Rom (SFW) firmware rev 009.048.000
PDH controller (PDHC) firmware rev B.023.003.040 built SUN AUG 05 21:53:18 2007
|
|
免费注册
楼主: coologin
发表于 2012-12-01 18:18
