vmware下solaris cluster 3.3安装配置问题

wallsen

自己搭个环境vmware workstation 6.5.2+solaris 5.10 u10+cluster 3.3 4/11
现在scinstall 配置网络这块为什么过不去，如下：
  >>> Cluster Transport Adapters and Cables <<<

    Transport adapters are the adapters that attach to the private cluster
    interconnect.

    What is the name of the first cluster transport adapter?  e1000g1

Adapter "e1000g1" is already in use as a public network adapter.

    What is the name of the first cluster transport adapter?  e1000g0

Adapter "e1000g0" is already in use as a public network adapter.



网络配置如下：
# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
        inet 127.0.0.1 netmask ff000000
e1000g0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
        inet 192.168.10.11 netmask ffffff00 broadcast 192.168.10.255
        ether 0:c:29:55:c1:16
e1000g1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
        inet 192.168.0.11 netmask ffffff00 broadcast 192.168.0.255
        ether 0:c:29:55:c1:20
# cat /etc/hosts
#
# Internet host table
#
::1     localhost      
127.0.0.1       localhost      
192.168.10.11   sol1    loghost
192.168.0.11    sol1-test      

192.168.10.12   sol2
192.168.0.12    sol2-test

虚拟的是2块host-only方式的网卡，可能什么原因？？？

anthonypaopao

这里是让输入的心跳网卡吧....