安装HP-UN 11.22出错

dong_jh

我的RX1600（安腾1g，512M内存），服务器网卡工作不正常，开始是百兆的不能用了，禁用后改用千兆的，过了几天主机名莫名其妙丢了。重新配置好后，又过了几天千兆的网卡也不能用了（两块网卡症状一样，PING自己是通的，状态也是UP的，就是与别的机器不通）。现在想把系统重装一下，进入EFI SHELL，用MAP查看CD设备是fs0。然后进入fs0：，可以看到安装文件install.efi等。输入install.efi后不久出现下列错误,然后重启又进入了引导管理器。已经试了N次。请各位大哥救命。
System Panic:

double panic: Bad News!


*** A system crash has occurred.  (See the above messages for details.)
*** The system is now preparing to dump physical memory to disk, for use
*** in debugging the crash.

ERROR:  No dump space is configured.  Physical memory will not be dumped.
1 0 0x000081 0x0000000000000000 start I/O discovery

润雨_yubw

是不是操作系统类型没设好

dong_jh

怎么设？

dong_jh

完整的错误信息：
1 0 0x000081 0x0000000000000000 start I/O discovery
***********************************************************
* ROM Version : 01.10
* ROM Date    : 10/14/2003
* BMC Version :  02.26
***********************************************************
1 0 0x0000A4 0x0000000000000000 start memory configuration
1 0 0x000014 0x0000000000000000 CPU0 starting cell relocation
1 0 0x000009 0x0000000000000000 CPU0 launch EFI
1 0 0x000207 0x000000000011000C CPU0 starting EFI
[=3h[=3hPOSSE Library version  0.10 is loading...
    CellularPlatform = FALSE (use "setcell" to toggle)
EFI version 1.10 [14.61]
EFI64 Running on Intel(R) Itanium Processor Family
EFI 1.10 IPF server rx1600 1.10 [Wed Oct  8 15:36:26 2003] - HP


Copyright (c) 2000-2003 Broadcom Corporation

Broadcom NetXtreme Gigabit Ethernet EFI driver v6.1.2

Loading 'FPSWA'...
Loading 'lsi1030'...
2 0 0x00020B 0x0000000000000006 EFI Launching Boot Manager

Searching for device at Scsi(Pun0,Lun0)
                                                                              
Scsi(Pun0,Lun0) HP 36.4GST336607LC      HPC4
                                                                              
Scsi(Pun0,Lun0) HP 36.4GST336607LC      HPC4 (320 MBytes/sec)

Searching for device at Scsi(Pun0,Lun1)
Searching for device at Scsi(Pun0,Lun2)
Searching for device at Scsi(Pun0,Lun3)
Searching for device at Scsi(Pun0,Lun4)
Searching for device at Scsi(Pun0,Lun5)
Searching for device at Scsi(Pun0,Lun6)
Searching for device at Scsi(Pun0,Lun7)
Searching for device at Scsi(Pun1,Lun0)
Searching for device at Scsi(Pun2,Lun0)
Searching for device at Scsi(Pun3,Lun0)
Searching for device at Scsi(Pun4,Lun0)
Searching for device at Scsi(Pun5,Lun0)
Searching for device at Scsi(Pun6,Lun0)
Searching for device at Scsi(Pun8,Lun0)
Searching for device at Scsi(Pun9,Lun0)
Searching for device at Scsi(PunA,Lun0)
Searching for device at Scsi(PunB,Lun0)
Searching for device at Scsi(PunC,Lun0)
Searching for device at Scsi(PunD,Lun0)
Searching for device at Scsi(PunE,Lun0)
Searching for device at Scsi(PunF,Lun0)
                                                                              

Searching for device at Scsi(Pun0,Lun0)
Searching for device at Scsi(Pun1,Lun0)
Searching for device at Scsi(Pun2,Lun0)
Searching for device at Scsi(Pun3,Lun0)
Searching for device at Scsi(Pun4,Lun0)
Searching for device at Scsi(Pun5,Lun0)
Searching for device at Scsi(Pun6,Lun0)
Searching for device at Scsi(Pun8,Lun0)
Searching for device at Scsi(Pun9,Lun0)
Searching for device at Scsi(PunA,Lun0)
Searching for device at Scsi(PunB,Lun0)
Searching for device at Scsi(PunC,Lun0)
Searching for device at Scsi(PunD,Lun0)
Searching for device at Scsi(PunE,Lun0)
Searching for device at Scsi(PunF,Lun0)
                                                                              
Broadcom NetXtreme Gigabit Ethernet (BCM5701) is detected (PCI)

EFI Boot Manager ver 1.10 [14.61]  Firmware ver 1.10 [4341]

Loading device drivers

EFI Boot Manager ver 1.10 [14.61]  Firmware ver 1.10 [4341]

Please select a boot option
HP-UX Primary Boot: 0/1/1/0.0.0                                 EFI Shell [Built-in]                                            Boot Option Maintenance Menu                                    System Configuration Menu                                       Use ^ and v to change option(s). Use Enter to select an option
System Configuration Menu                                       HP-UX Primary Boot: 0/1/1/0.0.0                                 Default boot selection will be booted in 10 seconds  Default boot selection will be booted in 9 seconds  Default boot selection will be booted in 8 seconds  Default boot selection will be booted in 7 seconds  Default boot selection will be booted in 6 seconds  Default boot selection will be booted in 5 seconds                                                                  HP-UX Primary Boot: 0/1/1/0.0.0                                 EFI Shell [Built-in]                                                                                                            EFI Shell [Built-in]                                            
Loading.: EFI Shell [Built-in]
EFI Shell version 1.10 [14.61]
Device mapping table
  fs0  : Acpi(HWP0002,0)/Pci(2|0)/Ata(Primary,Master)/CDROM(Entry0)
  fs1  : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)/HD(Part1,Sig91D8F244-9387-11D8-8002-D6217B60E58
  fs2  : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)/HD(Part3,Sig91D8F294-9387-11D8-8004-D6217B60E58
  blk0 : Acpi(HWP0002,0)/Pci(2|0)/Ata(Primary,Master)
  blk1 : Acpi(HWP0002,0)/Pci(2|0)/Ata(Primary,Master)/CDROM(Entry0)
  blk2 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)
  blk3 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)/HD(Part1,Sig91D8F244-9387-11D8-8002-D6217B60E58
  blk4 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)/HD(Part2,Sig91D8F26C-9387-11D8-8003-D6217B60E58
  blk5 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)/HD(Part3,Sig91D8F294-9387-11D8-8004-D6217B60E58
startup.nsh>; echo -off

Welcome to HP-UX Install Media

The following edd30 command is not provided on all models but is
required on some. If a `'edd30' not found` error message is seen,
it can be safely ignored.
'edd30' not found
Exit status code: Invalid Parameter

(c) Copyright 1990-2002, Hewlett Packard Company.
All rights reserved

HP-UX Boot Loader for IA64  Revision 1.713

Press Any Key to interrupt Autoboot
AUTO ==>; boot :IINSTALL
Seconds left till autoboot -     10  9  8
   Type 'help' for help      

HPUX>; exit
Exiting bootloader.
Shell>; map
Device mapping table
  fs0  : Acpi(HWP0002,0)/Pci(2|0)/Ata(Primary,Master)/CDROM(Entry0)
  fs1  : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)/HD(Part1,Sig91D8F244-9387-11D8-8002-D6217B60E58
  fs2  : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)/HD(Part3,Sig91D8F294-9387-11D8-8004-D6217B60E58
  blk0 : Acpi(HWP0002,0)/Pci(2|0)/Ata(Primary,Master)
  blk1 : Acpi(HWP0002,0)/Pci(2|0)/Ata(Primary,Master)/CDROM(Entry0)
  blk2 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)
  blk3 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)/HD(Part1,Sig91D8F244-9387-11D8-8002-D6217B60E58
  blk4 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)/HD(Part2,Sig91D8F26C-9387-11D8-8003-D6217B60E58
  blk5 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)/HD(Part3,Sig91D8F294-9387-11D8-8004-D6217B60E58

Shell>; fs0:

fs0:\>; dir
Directory of: fs0:\

  08/09/02  10:11a <DIR>;          2,048  EFI
  08/09/02  10:11a              419,545  INSTALL.EFI
  08/09/02  10:11a                   16  AUTO
  08/09/02  10:11a                  361  STARTUP.NSH
          3 File(s)     419,922 bytes
          1 Dir(s)


fs0:\>; insta all.efi



(c) Copyright 1990-2002, Hewlett Packard Company.
All rights reserved

HP-UX Boot Loader for IA64  Revision 1.713

Press Any Key to interrupt Autoboot
AUTO ==>; boot :IINSTALL
Seconds left till autoboot -     10  9  8  7  6  5  4  3  2  1  0
AUTOBOOTING...
AUTO BOOT>; boot :IINSTALL
>; System Memory = 501 MB
loading section 0
........................................ (complete)
loading section 1
...... (complete)
loading symbol table
loading ram disk file (:IINSTALLFS).
............................................
(complete)
Launching :IINSTALL
SIZE: Text:20176K + Data:2798K + BSS:2496K = Total:25471K

Console is on a Serial Device
Booting kernel...


Stored message buffer up to panic:
i isc!!
PERFMON: Unrecognized processor model!
    Swap device table:  (start & size given in 512-byte blocks)
        entry 0 - auto-configured on root device; ignored - no room
WARNING: no swap device configured, so dump cannot be defaulted to primary swap.
WARNING: No dump devices are configured.  Dump is disabled.
Starting the STREAMS daemons-phase 1
Create STCP device files
     $Revision: vmunix:    B.11.22_LR FLAVOR= DFILE=dfile.em_64.isu Thu Aug  8 12:55:57 PDT 2002 $
Memory Information:
    physical page size = 4096 bytes, logical page size = 4096 bytes
    Physical: 513712 Kbytes, lockable: 153592 Kbytes, available: 316580 Kbytes

init died with return value 31488.
Please check for init's execute permission,
init's location and the root partition's location.

panic: init died
Stack Trace:
  IP                  Function Name
  0xe0000000004ac040  exit+0xdf0
  0xe0000000003898c0  rexit+0x40
  0xe000000000462320  syscall+0xab0
End of Stack Trace

linkstamp:          Thu Aug 8 12:56:15 PDT 2002
_release_version:   @(#) $Revision: vmunix:    B.11.22_LR FLAVOR= DFILE=dfile.em_64.isu Thu Aug  8 12:55:57 PDT 2002 $
******************************************************************************

reg_dump(): Displaying register values (in hex) from the
reg_dump(): save state at 0xe000000100016a00
reg_dump(): error/reason = 0000/0008  flags = 00000001 save = 00000000_00000000

0- 3 00000000_00000000 e0000001_002bb170 8fffffff_7ffec000 00000000_01011072
4- 7 00000000_00000000 c0000000_00000408 60000000_c006bd70 20000000_7eff83d0
8-11 00000000_00006fb0 00000000_00000000 a0000000_00000000 50000001_802b6630
12-15 e0000001_002b4550 8fffffff_7ffec000 00000000_00000001 02800000_0c015b30
16-19 e0000000_003446e0 e0000001_002a3590 8fffffff_7fffb100 afffffff_7fff3f30
20-23 8fffffff_7fff4010 00000000_00000000 80000000_ff608ac9 50000001_802b6630
24-27 00000000_0000050d afffffff_7fff3f28 afffffff_7fff3f20 afffffff_7fff3f38
28-31 8fffffff_7fff4008 8fffffff_7fff4000 8fffffff_7fff4018 c0000000_0000040c

br_0-3 e0000000_00344a40 60000000_00000040 60000000_00000030 60000000_00000020
br_4-7 00000000_00000000 00000000_00000000 e0000000_003446e0 00000000_1f810220

pr value = ffffffff_ffff8ec9

           6  6         5         4         3         2         1         
           3  0         0         0         0         0         0         0
pr bits  = 3210987654321098765432109876543210987654321098765---109-76--3--0

      k0=00000000_00000001      k1=00000000_00000001      k2=00000000_00000000
      k3=00000000_00000000    ppdp=e0000001_00017600     ktp=e0000001_04367040
     ksp=8fffffff_80000873      sv=e0000001_03c03000

bspstore=e0000001_002a3590     bsp=e0000001_002a3768     rsc=00000010         
bsp_base=e0000001_00006190   dirty=00000000_000001d8    rnat=00000000_00000000
     ccv=00000000_00000001    unat=00000000_00000000    fpsr=0009804c_8270433f
     pfs=00000000_0000050d      lc=02800000_0c0157ac      ec=08

  psr=00001010_0802601a     iip=e0000000_007760c0     isr=00000804_00000000
     ifs=8000000c_78711020    iipa=e0000000_007760b0

   arg0=8fffffff_7fff4000 (cr.ivr if External Interrupt else addr causing fault)
   arg1=00000000_00000000 (cr.tpr if External Interrupt else 0)

Interruption type: Data TLB Fault

Bad News: Interrrupted sp was expected to be on the kernel stack.  Instead,
Bad News: sp (0xe0000001002b4550) was >; ksp (ar.k6 == 0x8fffffff80000000).

******************************************************************************

System Panic:

double panic: Bad News!


*** A system crash has occurred.  (See the above messages for details.)
*** The system is now preparing to dump physical memory to disk, for use
*** in debugging the crash.

ERROR:  No dump space is configured.  Physical memory will not be dumped.
1 0 0x000081 0x0000000000000000 start I/O discovery
***********************************************************
* ROM Version : 01.10
* ROM Date    : 10/14/2003
* BMC Version :  02.26
***********************************************************
1 0 0x0000A4 0x0000000000000000 start memory configuration
1 0 0x000014 0x0000000000000000 CPU0 starting cell relocation
1 0 0x000009 0x0000000000000000 CPU0 launch EFI
1 0 0x000207 0x000000000011000C CPU0 starting EFI
[=3h[=3hPOSSE Library version  0.10 is loading...
    CellularPlatform = FALSE (use "setcell" to toggle)
EFI version 1.10 [14.61]
EFI64 Running on Intel(R) Itanium Processor Family
EFI 1.10 IPF server rx1600 1.10 [Wed Oct  8 15:36:26 2003] - HP


Copyright (c) 2000-2003 Broadcom Corporation

Broadcom NetXtreme Gigabit Ethernet EFI driver v6.1.2

Loading 'FPSWA'...
Loading 'lsi1030'...
2 0 0x00020B 0x0000000000000006 EFI Launching Boot Manager

Searching for device at Scsi(Pun0,Lun0)
                                                                              
Scsi(Pun0,Lun0) HP 36.4GST336607LC      HPC4
                                                                              
Scsi(Pun0,Lun0) HP 36.4GST336607LC      HPC4 (320 MBytes/sec)

Searching for device at Scsi(Pun0,Lun1)
Searching for device at Scsi(Pun0,Lun2)
Searching for device at Scsi(Pun0,Lun3)
Searching for device at Scsi(Pun0,Lun4)
Searching for device at Scsi(Pun0,Lun5)
Searching for device at Scsi(Pun0,Lun6)
Searching for device at Scsi(Pun0,Lun7)
Searching for device at Scsi(Pun1,Lun0)
Searching for device at Scsi(Pun2,Lun0)
Searching for device at Scsi(Pun3,Lun0)
Searching for device at Scsi(Pun4,Lun0)
Searching for device at Scsi(Pun5,Lun0)
Searching for device at Scsi(Pun6,Lun0)
Searching for device at Scsi(Pun8,Lun0)
Searching for device at Scsi(Pun9,Lun0)
Searching for device at Scsi(PunA,Lun0)
Searching for device at Scsi(PunB,Lun0)
Searching for device at Scsi(PunC,Lun0)
Searching for device at Scsi(PunD,Lun0)
Searching for device at Scsi(PunE,Lun0)
Searching for device at Scsi(PunF,Lun0)
                                                                              

Searching for device at Scsi(Pun0,Lun0)
Searching for device at Scsi(Pun1,Lun0)
Searching for device at Scsi(Pun2,Lun0)
Searching for device at Scsi(Pun3,Lun0)
Searching for device at Scsi(Pun4,Lun0)
Searching for device at Scsi(Pun5,Lun0)
Searching for device at Scsi(Pun6,Lun0)
Searching for device at Scsi(Pun8,Lun0)
Searching for device at Scsi(Pun9,Lun0)
Searching for device at Scsi(PunA,Lun0)
Searching for device at Scsi(PunB,Lun0)
Searching for device at Scsi(PunC,Lun0)
Searching for device at Scsi(PunD,Lun0)
Searching for device at Scsi(PunE,Lun0)
Searching for device at Scsi(PunF,Lun0)
                                                                              
Broadcom NetXtreme Gigabit Ethernet (BCM5701) is detected (PCI)

EFI Boot Manager ver 1.10 [14.61]  Firmware ver 1.10 [4341]

Loading device drivers

EFI Boot Manager ver 1.10 [14.61]  Firmware ver 1.10 [4341]

Please select a boot option
HP-UX Primary Boot: 0/1/1/0.0.0                                 EFI Shell [Built-in]                                            Boot Option Maintenance Menu                                    System Configuration Menu                                       Use ^ and v to change option(s). Use Enter to select an option
System Configuration Menu                                       HP-UX Primary Boot: 0/1/1/0.0.0                                 Default boot selection will be booted in 10 seconds

dong_jh

操作系统类型怎么设置？

润雨_yubw

1、从CellularPlatform = FALSE (use "setcell" to toggle) 看好像平台不对。也可能版本不对。
2、在console下能否看到硬盘，主机背面有无终结器。
3、在控制台下看看帮助，如何设置，我没有机器，说不上来
4、你在哪里。北京吗？

润雨_yubw

你的精神可嘉，能把这么详细信息贴出来，肯定有高手会解决。以后你就成为安腾高手了。希望解决后能共享一下。如果在北京。我可以去看看协助你解决问题。

dong_jh

HP工程师说可能操作系统版本不够高，要11IV2（11.23）。这是他的回复：
http://www.hp.com.cn/server/Integrity/rx1600/guige.asp
指出rx1600 支持的HPUX11iv2 ，即11.23
HPUX 11iv1.6 才是11.22

dong_jh

[quote="润雨_yubw"]1、从CellularPlatform = FALSE (use "setcell" to toggle) 看好像平台不对。也可能版本不对。
2、在console下能否看到硬盘，主机背面有无终结器。
3、在控制台下看看帮助，如何设置，我没有机器，说不上来
4、你..........[/quote]

有这种说法吗？你说的console是指EFI SHELL吗？

dong_jh

?