sl500

open_san

我有slc 6.0最新的软件，但是客户忘掉了sl500 带库的IP以及用户名还有密码，请问我应该怎么来通过软件管理这个带库？谢谢

东方蜘蛛

不知道LZ要对这台SL500干嘛？

东方蜘蛛

可以直接连机器背部的CLI 串口(RJ45)，然后查看下IP地址。用户名是service，初时安装时原厂会给你一个初始密码，一般第一次登录后都会修改。
SERVICE>> network ip address show
要使用SLC时需要网线链接机器背部的public网口(RJ45)。

open_san

回复 3# 东方蜘蛛


    谢谢蜘蛛大侠，我是准备来监控这台SL500，这台机器已经出保了，以前维护的人没有留下任何文档，甲方不知道IP，不知道密码。

   我查了oracle metalink ,里面的说法是
Load 1011 or later code per procedure below, then in step 3 login as “advsrv”, “service”, or “OEM”,
depending on what passwords are known, and enter the CLI “resetpw all” command. The advsrv password
can be obtained from the area tech specialist. New activation passwords for service, OEM, and admin will be
required.


Goal

SL500 - How to Reset OEM, Service, Admin, or Op Panel Passwords on Library

Fix

Passwords cannot be reset by the customer via the SL Console!


Steps to Follow
Reset Admin, Service or OEM password:


resetpw
• Places the specified login password back to the -needs activated- state. This is used to recover forgotten passwords.
..............
•Starting with code release 1011 in the SL500 you can reset passwords for roles: admin, oem, and service.
•Starting with this code release 1011 you no longer erase all passwords when you load or reload this level or higher.

Note: This function does not work for Advance Service Password, it is not field resetable.

Note: The customer can change the admin password from SLConsole but they can't reset it if they forgot their password.  If they forgot their password only a CSE can reset it from the CLI port.


Prerequisites:
•Code 1011 or higher
•You must be in the CLI port
•you must have activated a password

Syntax:

advsrv >> help resetpw
resetpw | | |
Places the specified login password back to the -needs activated-
state. This is used to recover forgotten passwords.

Note - For this example we were in advsrv. But you could also be in oem or service log in.

Example -

- oem resetpw all

- oem resetpw oem

- oem resetpw service

- oem resetpw admin

or

- service resetpw admin

- service resetpw service

- service resetpw oem

- service resetpw all

When this is done, it will take you back to password activation request on the next log in of the reset role.

The CSE will need to down load a new One Time Password from the Oracle Internal website.  






Operator Panel Reset:

Note: The customer can change the admin password from SLConsole but the customer cannot reset the admin password if it is forgotten.  If they forgot their password only a CSE can reset it from the CLI port.


When using "resetpw oppanel", once the command has been given, all you need to do is hit "Enter" on the Op Panel and then it will ask you to enter a new admin password.


文档我读了好几遍，激活码（ activated a password）这个东东在哪里？还是必须通过原厂才能拿到？

znnnz

mark一下此贴

wait空白

这SL 500也有过两次维护经历，第一次换个电源，体力活。

第二次看样子估计是driver的问题，想的用软件登录查看有啥报错的。


准备了串口线，但是没有口令，问客户要，客户也不知道，让客户问O，O的也说不知道。


最后就终止了，因为比较早了，就一直拖延的离开那家公司了。


比较悲催。

wait空白

回复 3# 东方蜘蛛


蜘蛛，这个口令有没有其他方法可以清除或者修改的，在不知道口令的情况下。

   

znnnz

If they forgot their password only a CSE can reset it from the CLI port.

wait空白

回复 8# znnnz

what is CSE?


please explain，thanks.