如何使用光驱启动

鑫杰

当然可以外置光驱，但其实最好的 就是用WEB ILOM 装，不求任何光驱

东方蜘蛛

学习

tomer

回复 11# 鑫杰


   求详细操作步骤，谢谢

rf00147

You need to boot your T4-1 or T4-4 SPARC system from your ISO boot and install image you have on your PC. The following steps allow you to accomplish this. This is known as an ILOM remote CD-ROM redirection. Here you mount an ISO image from your local PC hardrive as a virtual DVD available as a boot image on your T4 system. Pretty slick really. To implement the ILOM remote CDROM or DVD redirection you need to initiate a web browser session with your systems ILOM and launch the console. Below are the required steps.
1.Using a browser, connect to your servers ILOM ie. https://1.2.3.4 and login
2.Launch the console
3.click on Devices
4.click on CD-ROM images
5.file manager appears, map the ISO location to the image
6.start /HOST/console
7.obp devalias will show you a boot ISO alias called vcdrom
8.boot vcdrom

rf00147

You need to boot your T4-1 or T4-4 SPARC system from your ISO boot and install image you have on your PC. The following steps allow you to accomplish this. This is known as an ILOM remote CD-ROM redirection. Here you mount an ISO image from your local PC hardrive as a virtual DVD available as a boot image on your T4 system. Pretty slick really. To implement the ILOM remote CDROM or DVD redirection you need to initiate a web browser session with your systems ILOM and launch the console. Below are the required steps.
1.Using a browser, connect to your servers ILOM ie. https://1.2.3.4 and login
2.Launch the console
3.click on Devices
4.click on CD-ROM images
5.file manager appears, map the ISO location to the image
6.start /HOST/console
7.obp devalias will show you a boot ISO alias called vcdrom
8.boot vcdrom
？回复 13# tomer


   

rf00147

You need to boot your T4-1 or T4-4 SPARC system from your ISO boot and install image you have on your PC. The following steps allow you to accomplish this. This is known as an ILOM remote CD-ROM redirection. Here you mount an ISO image from your local PC hardrive as a virtual DVD available as a boot image on your T4 system. Pretty slick really. To implement the ILOM remote CDROM or DVD redirection you need to initiate a web browser session with your systems ILOM and launch the console. Below are the required steps.
1.Using a browser, connect to your servers ILOM ie. https://1.2.3.4 and login
2.Launch the console
3.click on Devices
4.click on CD-ROM images
5.file manager appears, map the ISO location to the image
6.start /HOST/console
7.obp devalias will show you a boot ISO alias called vcdrom
8.boot vcdrom

rf00147

You need to boot your T4-1 or T4-4 SPARC system from your ISO boot and install image you have on your PC. The following steps allow you to accomplish this. This is known as an ILOM remote CD-ROM redirection. Here you mount an ISO image from your local PC hardrive as a virtual DVD available as a boot image on your T4 system. Pretty slick really. To implement the ILOM remote CDROM or DVD redirection you need to initiate a web browser session with your systems ILOM and launch the console. Below are the required steps.
1.Using a browser, connect to your servers ILOM ie. https://1.2.3.4 and login
2.Launch the console
3.click on Devices
4.click on CD-ROM images
5.file manager appears, map the ISO location to the image
6.start /HOST/console
7.obp devalias will show you a boot ISO alias called vcdrom
8.boot vcdrom


   

znnnz

LS经典               

鑫杰

note:必须英文路径的ISO

San风夕

来看看,学习学习,