- 论坛徽章:
- 0
|
本帖最后由 鑫杰 于 2013-04-18 15:38 编辑
使用如下命令,进行进程追踪:
explorer –v
输出到如下位置hang住:
Mar 13 [23333] fcal: cmd: exit status: 0
Mar 13 [23333] fcal: cmd: luxadm display 508002000065dbe0
Mar 13 [23333] fcal: cmd: exit status: 0
Mar 13 [23333] firelink: RUNNING
Mar 13 [23333] firelink: exited: Sun Firelink Interconnect not installed
Mar 13 [23333] fma: RUNNING
Mar 13 [23333] fma: cmd: fmadm config
此时发现执行fmadm config 会在module行住
一般正常情况下
# fmadm config
MODULE VERSION STATUS DESCRIPTION
cpumem-diagnosis 1.6 active CPU/Memory Diagnosis
cpumem-retire 1.1 active CPU/Memory Retire Agent
disk-transport 1.0 active Disk Transport Agent
eft 1.16 active eft diagnosis engine
fabric-xlate 1.0 active Fabric Ereport Translater
fmd-self-diagnosis 1.0 active Fault Manager Self-Diagnosis
io-retire 1.0 active I/O Retire Agent
snmp-trapgen 1.0 active SNMP Trap Generation Agent
sysevent-transport 1.0 active SysEvent Transport Agent
syslog-msgs 1.0 active Syslog Messaging Agent
zfs-diagnosis 1.0 active ZFS Diagnosis Engine
zfs-retire 1.0 active ZFS Retire Agent
解决办法:
1.(In the leisure time of the server)You need to restart the service when then server is not busy,the operation will not affect the running business application system
You could restart the fmdadm service by the following way:
svcadm restart svc:/system/fmd:default
After do that
Administor:
fmadm config
重启fmadm进程,看问题是否可以解决。
2. You may need to restart the server,get the permission from the customer firstlly.
After do that
Administor:
fmadm config
重启主机,看问题是否可以解决。
3.升级FMADM 补丁
4.提前拷贝fmdump 等fma文件,删除后收集
5.如果碰见硬盘坏 一般没什么好办法。会hang在错误的硬盘处
|
|