make_tape_recovery问题求助

紫蝙蝠

# make_tape_recovery -A -m cpio
       * Creating local directories for configuration files and archive.

=======  05/09/13 01:02:07 EAT  Started make_tape_recovery. (Thu May 09 01:02:07 EAT 2013)
         @(#)Ignite-UX Revision C.7.15.254
         @(#)ignite/net_recovery (opt) Revision: /branches/IUX_RA1209/ignite/src@84961 Last Modified: 2012-07-24 17:39:58 +0530 (Tue, 24 Jul 2012)

       * Checking Versions of Ignite-UX filesets
       * Scanning system for IO devices...
       * Boot device is: 0/4/1/0.0xe26f8fef79ceaf.0x0
       * Creating System Configuration.
       * /opt/ignite/bin/save_config -f /var/opt/ignite/recovery/2013-05-09,01:02/system_cfg vg00
       * Backing Up Volume Group /dev/vg00
       * /usr/sbin/vgcfgbackup /dev/vg00
       * Creating Map Files for Volume Group /dev/vg00
       * /usr/sbin/vgexport -s -p -m /etc/lvmconf/vg00.mapfile /dev/vg00

       * Creating Control Configuration.
       * Creating Archive File List
       * Creating Archive Configuration

       * /opt/ignite/lbin/make_arch_config -c /var/opt/ignite/recovery/2013-05-09,01:02/archive_cfg -g /var/opt/ignite/recovery/2013-05-09,01:02/flist -n 2013-05-09,01:02 -r ipf -b 64 -d Recovery\ Archive
         -t 22 -i 4 -m c
       * Saving the information about archive to /var/opt/ignite/recovery/previews
       * Creating The Tape Archive
WARNING: You are about to create an Itanium-based recovery tape.  If this system does NOT support direct tape boot, you will need to perform "two-step media recovery" where the boot media (CD or DVD) has
         the same version of Ignite-UX as the version on this tape.
       * /opt/ignite/data/scripts/make_sys_image -c n -d /dev/rmt/0mn -t n -s local -n 2013-05-09,01:02 -m c -w /var/opt/ignite/recovery/2013-05-09,01:02/recovery.log -u -R -g
         /var/opt/ignite/recovery/2013-05-09,01:02/flist -a 131642790
         
       * Preparing to create a system archive.

       * Archiving contents of xyoms via cpio image to local device /dev/rmt/0mn.
pax: Ready for volume 2
pax: Type "go" when ready to proceed (or "quit" to abort): go
pax: Ready for volume 3
pax: Type "go" when ready to proceed (or "quit" to abort): Continuing
go
pax: Ready for volume 4
pax: Type "go" when ready to proceed (or "quit" to abort): Continuing

pax: Ready for volume 4
pax: Type "go" when ready to proceed (or "quit" to abort): go
pax: Ready for volume 5
pax: Type "go" when ready to proceed (or "quit" to abort): Continuing

pax: Ready for volume 5
pax: Type "go" when ready to proceed (or "quit" to abort):
pax: Ready for volume 5
pax: Type "go" when ready to proceed (or "quit" to abort):
pax: Ready for volume 5
pax: Type "go" when ready to proceed (or "quit" to abort): go
pax: Ready for volume 6
pax: Type "go" when ready to proceed (or "quit" to abort): Continuing

pax: Ready for volume 6
pax: Type "go" when ready to proceed (or "quit" to abort): go
pax: Ready for volume 7
pax: Type "go" when ready to proceed (or "quit" to abort): Continuing

pax: Ready for volume 7
pax: Type "go" when ready to proceed (or "quit" to abort): go
pax: Ready for volume 8
pax: Type "go" when ready to proceed (or "quit" to abort): Continuing

pax: Ready for volume 8
pax: Type "go" when ready to proceed (or "quit" to abort): go
pax: Ready for volume 9
pax: Type "go" when ready to proceed (or "quit" to abort): Continuing


跑了五六个小时之后，反复报上面那个信息，输入go确认之后，就跳到到下一个，几百次都没有终结，本人小白，希望高手给予帮助，谢谢！！！！

lbseraph

VG00太大，磁带不够了吧。

参考下面链接：
http://h30499.www3.hp.com/t5/Ign ... ry-pax/td-p/5051854