uboot1.1.6移植到s3c2440

libing741799085

arm-linux-ar crv libmysmdk2440.a mysmdk2440.o flash.o lowlevel_init.o
r - mysmdk2440.o
r - flash.o
r - lowlevel_init.o
make[1]: Leaving directory `/u-boot-1.1.6/board/mysmdk2440'
make -C cpu/arm920t/
make[1]: Entering directory `/u-boot-1.1.6/cpu/arm920t'
arm-linux-gcc  -D__ASSEMBLY__ -g  -Os   -fno-strict-aliasing  -fno-common -ffixed-r8 -msoft-float  -D__KERNEL__ -DTEXT_BASE=0x33F80000  -I/u-boot-1.1.6/include -fno-builtin -ffreestanding -nostdinc -isystem /opt/opt/FriendlyARM/toolschain/4.4.3/bin/../lib/gcc/arm-none-linux-gnueabi/4.4.3/include -pipe  -DCONFIG_ARM -D__ARM__ -march=armv4t -mabi=apcs-gnu -c -o start.o start.S
make[1]: Leaving directory `/u-boot-1.1.6/cpu/arm920t'
make -C cpu/arm920t/s3c24x0/
make[1]: Entering directory `/u-boot-1.1.6/cpu/arm920t/s3c24x0'
arm-linux-gcc -g  -Os   -fno-strict-aliasing  -fno-common -ffixed-r8 -msoft-float  -D__KERNEL__ -DTEXT_BASE=0x33F80000  -I/u-boot-1.1.6/include -fno-builtin -ffreestanding -nostdinc -isystem /opt/opt/FriendlyARM/toolschain/4.4.3/bin/../lib/gcc/arm-none-linux-gnueabi/4.4.3/include -pipe  -DCONFIG_ARM -D__ARM__ -march=armv4t -mabi=apcs-gnu -Wall -Wstrict-prototypes -c -o nand_flash.o nand_flash.c
In file included from /u-boot-1.1.6/include/nand.h:29,
                 from nand_flash.c:11:
/u-boot-1.1.6/include/linux/mtd/nand.h:412: error: expected ']' before ';' token
/u-boot-1.1.6/include/linux/mtd/nand.h:413: error: expected ';' before 'int'
make[1]: *** [nand_flash.o] 错误 1
make[1]: Leaving directory `/u-boot-1.1.6/cpu/arm920t/s3c24x0'
make: *** [cpu/arm920t/s3c24x0/libs3c24x0.a] 错误 2

wenhq

/u-boot-1.1.6/include/linux/mtd/nand.h:412: error: expected ']' before ';' toke

？

dooros

建议楼主去嵌入式版块问问。

libing741799085

回复 3# dooros
嗯谢了，我一开始就是在嵌入式板块问的没人回答，现在问题已经解决了
   

libing741799085

回复 2# wenhq


    实际上是因为没有定义NAND_MAX_CHIPS所致，出现这种乱七八糟的错误，问题已解决谢了