- 论坛徽章:
- 0
|
有一台机器,网卡很怪异,开机不通,切换运行级别就通,详细了解可以参看:http://bbs.chinaunix.net/thread-4079298-6-1.html
我在想升级网卡驱动会不会好一些,但是我对linux实在是太不了解,所以想问一下linux一般怎么升级驱动,万一升级失败,能不能还原到原先的驱动。
这台机器是有窗口界面的,也就是可以顺利进入运行级别5,窗口界面操作起来是不是简单一些?
[root@Webquery ~]# kudzu --probe --class=network
-
class: NETWORK
bus: PCI
detached: 0
device: eth0
driver: e1000e
desc: "Intel Corporation 82574L Gigabit Network Connection"
network.hwaddr: 00:22:64:89:91:4c
vendorId: 8086
deviceId: 10d3
subVendorId: 103c
subDeviceId: 3250
pciType: 1
pcidom: 0
pcibus: 20
pcidev: 0
pcifn: 0
-
class: NETWORK
bus: PCI
detached: 0
device: eth1
driver: tg3
desc: "Broadcom Corporation NetXtreme BCM5723 Gigabit Ethernet PCIe"
network.hwaddr: d8:d3:85:d7:ec:82
vendorId: 14e4
deviceId: 165b
subVendorId: 103c
subDeviceId: 705d
pciType: 1
pcidom: 0
pcibus: 1e
pcidev: 0
pcifn: 0
[root@Webquery ~]# modinfo e1000e
filename: /lib/modules/2.6.18-128.el5PAE/kernel/drivers/net/e1000e/e1000e.ko
version: 0.3.3.3-k4
license: GPL
description: Intel(R) PRO/1000 Network Driver
author: Intel Corporation, <linux.nics@intel.com>
srcversion: 00ED8D6A485CDAE1FAED679
alias: pci:v00008086d000010DFsv*sd*bc*sc*i*
alias: pci:v00008086d000010DEsv*sd*bc*sc*i*
alias: pci:v00008086d000010CEsv*sd*bc*sc*i*
alias: pci:v00008086d000010CDsv*sd*bc*sc*i*
alias: pci:v00008086d000010CCsv*sd*bc*sc*i*
alias: pci:v00008086d000010CBsv*sd*bc*sc*i*
alias: pci:v00008086d000010F5sv*sd*bc*sc*i*
alias: pci:v00008086d000010BFsv*sd*bc*sc*i*
alias: pci:v00008086d000010E5sv*sd*bc*sc*i*
alias: pci:v00008086d0000294Csv*sd*bc*sc*i*
alias: pci:v00008086d000010BDsv*sd*bc*sc*i*
alias: pci:v00008086d000010C3sv*sd*bc*sc*i*
alias: pci:v00008086d000010C2sv*sd*bc*sc*i*
alias: pci:v00008086d000010C0sv*sd*bc*sc*i*
alias: pci:v00008086d00001049sv*sd*bc*sc*i*
alias: pci:v00008086d0000104Dsv*sd*bc*sc*i*
alias: pci:v00008086d0000104Bsv*sd*bc*sc*i*
alias: pci:v00008086d0000104Asv*sd*bc*sc*i*
alias: pci:v00008086d000010C4sv*sd*bc*sc*i*
alias: pci:v00008086d000010C5sv*sd*bc*sc*i*
alias: pci:v00008086d0000104Csv*sd*bc*sc*i*
alias: pci:v00008086d000010BBsv*sd*bc*sc*i*
alias: pci:v00008086d00001098sv*sd*bc*sc*i*
alias: pci:v00008086d000010BAsv*sd*bc*sc*i*
alias: pci:v00008086d00001096sv*sd*bc*sc*i*
alias: pci:v00008086d000010D3sv*sd*bc*sc*i*
alias: pci:v00008086d0000109Asv*sd*bc*sc*i*
alias: pci:v00008086d0000108Csv*sd*bc*sc*i*
alias: pci:v00008086d0000108Bsv*sd*bc*sc*i*
alias: pci:v00008086d0000107Fsv*sd*bc*sc*i*
alias: pci:v00008086d0000107Esv*sd*bc*sc*i*
alias: pci:v00008086d0000107Dsv*sd*bc*sc*i*
alias: pci:v00008086d000010B9sv*sd*bc*sc*i*
alias: pci:v00008086d000010D5sv*sd*bc*sc*i*
alias: pci:v00008086d000010DAsv*sd*bc*sc*i*
alias: pci:v00008086d000010D9sv*sd*bc*sc*i*
alias: pci:v00008086d00001060sv*sd*bc*sc*i*
alias: pci:v00008086d000010A5sv*sd*bc*sc*i*
alias: pci:v00008086d000010BCsv*sd*bc*sc*i*
alias: pci:v00008086d000010A4sv*sd*bc*sc*i*
alias: pci:v00008086d0000105Fsv*sd*bc*sc*i*
alias: pci:v00008086d0000105Esv*sd*bc*sc*i*
depends:
vermagic: 2.6.18-128.el5PAE SMP mod_unload 686 REGPARM 4KSTACKS gcc-4.1
parm: copybreak:Maximum size of packet that is copied to a new buffer on receive (uint)
parm: TxIntDelay:Transmit Interrupt Delay (array of int)
parm: TxAbsIntDelay:Transmit Absolute Interrupt Delay (array of int)
parm: RxIntDelay:Receive Interrupt Delay (array of int)
parm: RxAbsIntDelay:Receive Absolute Interrupt Delay (array of int)
parm: InterruptThrottleRate:Interrupt Throttling Rate (array of int)
parm: IntMode:Interrupt Mode (array of int)
parm: SmartPowerDownEnable:Enable PHY smart power down (array of int)
parm: KumeranLockLoss:Enable Kumeran lock loss workaround (array of int)
parm: WriteProtectNVM:Write-protect NVM [WARNING: disabling this can lead to corrupted NVM] (array of int)
module_sig: 883f3504949344d31b497468cdd12cf11248d80a0959864d34ef768e9d0e2705cc8b222cdf621e710a0cdee89eeee9feb8bbff7ec1fb0402c126e80
有问题的就是eth0 |
|