EMS报错An attempt to read from a device on the PDHC's SM bus has failed.

ykjack

是不是CELL板坏了？

>------------ Event Monitoring Service Event Notification ------------<

Notification Time: Mon Jun 24 10:40:04 2013

racdb1 sent Event Monitor notification information:

/system/events/ipmi_fpl/ipmi_fpl is >= 1.
Its current value is SERIOUS(4).



Event data from monitor:

Event Time..........: Mon Jun 24 10:40:03 2013
Severity............: SERIOUS
Monitor.............: fpl_em
Event #.............: 631
System..............:

Summary:

     An attempt to read from a device on the PDHC's SM bus has failed.

Description of Error:

     An attempt to read from a device on the PDHC's SM bus has failed. The
     devices on the SM bus are the CPU modules' FRU EEPROMs, the CPU modules'
     Processor Information ROMs, and the CPU modules' thermal sensors. The
     Data field information contains information that can identify the exact
     device that has failed. Refer to the Cell ERS for a mapping of SM Bus
     device addresses to devices.  Data Bytes[0-1]: Reserved  Data
     Bytes[2-3]: SM bus Device Address  Data Bytes[4-5]: Starting Word
     Address  Data Bytes[6-7]: Size of attempted access (in bytes).

Probable Cause / Recommended Action:

     A hardware fault has occurred.

Additional Event Data:  
     System IP Address...:
     Event Id............: 631520130624104003
     Monitor Version.....: C.07.01.06
     Event Class.........: System
     Client Configuration File............:
     /var/stm/config/tools/monitor/default_fpl_em.clcfg
     Client Configuration File Version....: A.00.00
          Qualification criteria met.
               Number of events: 1
     Associated OS error log entry id(s)
          None
     Additional System Data:
          System Model Number.............: ia64 hp server rx8640
          EMS Version.....................: A.04.20
          STM Version.....................: NA
     Latest information on this event:
          http://h20000.www2.hp.com/bizsup ... ctID=c02065065#e631


v-v-v-v-v-v-v-v-v-v-v-v-v    D  E  T  A  I  L  S     v-v-v-v-v-v-v-v-v-v-v-v-v   

IPMI event hex              : 0x76800c4002e00000 0x0
Time Stamp                  : Mon Jun 24 10:02:08 2013
Event keyword               : PDHC_SMBUS_READ_FAILED
Alert level name            : Warning
Reporting vers              : NA
Data field type             : Implementation dependent data field
Decoded data field          : NA
Reporting entity ID         : 0x2
Reporting entity Full Name  : PDH Controller
IPMI Event ID               : 0xc40

Error Details:

     Additional information on this event can be obtained from evweb
     logviewer (Refer SFM User Guide) with the following log id: 507901

以下是MP的信息，PDHC最后一个不是*，是不是不正常啊？


[RX8640-1] MP:CM> ps

Display detailed status of the selected MP bus device.


The following MP bus devices were found:
+---+----+-----+-------+-------+-----------+
|   |    |     |       |       |           |
|   |    | Sys |       |  IO   | Bulk Pwr  |
|Cab| MP |Bkpln| Cells |Chassis| Supplies  |
| # |M  S|     |0 1 2 3| 0   1 |0 1 2 3 4 5|
+---+----+-----+-------+-------+-----------+
| 0 |*  *|  *  |* * *  | *   * |* * * * *  |
+---+----+-----+-------+-------+-----------+

You may display detailed power and hardware status for the following items:

    T - Cabinet
    S - System Backplane
    G - MP (Core I/O)
    P - IO Chassis
    C - Cell
        Select Device: c
    Enter cell number: 2

HW status for Cell 2 : NO FAILURE DETECTED

Power status : on, no fault
Faults above are latched. They are cleared just before the cell is powered on.
Boot is not blocked
PDH memory is shared
Processor Compatibility : OK
RIO cable status : not connected
RIO cable connection physical location : cannot be determined
Core cell is cell 0
Attention Led is off

PDHC status Leds :  ***-

haizdl

WBEM Severity: MAJOR
Event Summary: An attempt to read from a device on the PDHC's SM bus has failed.
Event Description: An attempt to read from a device on the PDHC's SM bus has failed. The devices on the SM bus are the CPU modules' FRU EEPROMs, the CPU modules' Processor Information ROMs, and the CPU modules' thermal sensors. The Data field information contains information that can identify the exact device that has failed. Refer to the Cell ERS for a mapping of SM Bus device addresses to devices. Data Bytes[0-1]: Reserved Data Bytes[2-3]: SM bus Device Address Data Bytes[4-5]: Starting Word Address Data Bytes[6-7]: Size of attempted access (in bytes).
Probable Cause: Unknown
Event Category: System Hardware
Event Sub-Category: Unknown
Cause 1 : A hardware fault has occurred.
Recommended Action1 : Contact HP Support personnel to troubleshoot the Cell Board, Cell Power Board, and PDH Daughtercard.

lbseraph

最好抓好MP的所有日志，然后发给HP分析一下。这个Bus上面的备件有好几个，得从具体报错前确认。