- 论坛徽章:
- 0
|
本帖最后由 李惟 于 2013-07-16 17:07 编辑
用wpa连接wifi
重复提示如下,请问如何解决呢:- <=== rtw_ips_pwr_down..................... in 70ms
- rfpwrstate_check call ips_leave....
- ==>ips_leave cnts:11
- ===> rtw_ips_pwr_up..............
- ===> ips_netdrv_open.........
- rtl8188e_FirmwareDownload: fw_ver=4 fw_subver=0 sig=0x88e1
- _FWFreeToGo: Checksum report OK! REG_MCUFWDL:0x00030004
- _FWFreeToGo: Polling FW ready success!! REG_MCUFWDL:0x000300c6
- Set RF Chip ID to RF_6052 and RF type to 1T1R.
- pDM_Odm TxPowerTrackControl = 1
- MAC Address from REG_MACID = 14:cf:92:d2:fd:d7
- rtl8188eu_hal_init in 660ms
- <=== rtw_ips_pwr_up.............. in 680ms
- ==> ips_leave.....LED(0x00088282)...
- survey done event(15)
- ==>pwr_state_check_handler .fw_state(8)
- ==> rtw_ps_cmd , enqueue CMD
- ==>rtw_ps_processor .fw_state(8)
- ==>ips_enter cnts:12
- ==>power_saving_ctrl_wk_hdl change rf to OFF...LED(0x00608282)....
- ===> rtw_ips_pwr_down...................
- ====> rtw_ips_dev_unload...
- usb_read_port_cancel
- usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
- usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
- usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
- usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
- usb_write_port_cancel
- ==> rtl8188eu_hal_deinit
- bkeepfwalive(0)
- <=== rtw_ips_pwr_down..................... in 70ms
复制代码 |
|