求助: AS400 IPL A9002000

khchan99

硬件: 只有 tp-link router, hub
都是通过 ethernet 连接
(沒有主控台)


上星期曾出現,  IP地址冲突, 无法用 ibm-5250 emulation  连接
(IP地址冲突 已解决)





使用02 B M启动，控制面板上的代码就停在“A9002000”。



有什么办法解决上述问题吗？

　　请教。。。

sunsay521

Possible reasons you received system reference code A90002000:

If the system displays this SRC code, it usually means that a console was not found by OS/400®.
The iSeries™ system value QAUTOCFG must be set to ON. OS/400 is unable to create the new console device if it is off.
If you just migrated the console from one type to another and the new console fails to work in OS/400 you may need to use another workstation to manually delete the controller and device description associated with the old console device.
Note:
You may be able to use the console service functions (65+21) to assist in a recovery or to gather debug data.


未找到控制台。 重新一下，有可能会解决，如解决不了，安装提示方式65+21调节。

khchan99

还是解决不了

我按了
25 [執行]
26 [執行]
65 [執行]
21 [執行]
指示燈 跳到  01 B M

gpm1xf

你没有CONSOLE怎么能M（手动）开机呢？使用NORMAIL方式（01 B N)开机吧

khchan99

多謝
今早用 BN 起动
已 5 个小時停在 C9002970

依手册 C9002970 = Database recovery part 1, journal recovery part 1. Response. No action is required
不过沒有 硬碟转动声

khchan99

今天回來 还停在 C9002970 (己超过 50 小時)
还有其它方法起动吗?