HP-UX2600，启动不了，在线等待啊。

yarcce

Loading.: HP-UX Primary Boot: 0/1/1/0.0.0                           
Starting: HP-UX Primary Boot: 0/1/1/0.0.0

(c) Copyright 1990-2003, Hewlett Packard Company.
All rights reserved

HP-UX Boot Loader for IPF  --  Revision 1.73

Press Any Key to interrupt Autoboot
\EFI\HPUX\AUTO ==> boot vmunix
Seconds left till autoboot -   0
AUTOBOOTING...
AUTO BOOT> boot vmunix
> System Memory = 2036 MB
loading section 0
............................................. (complete)
loading section 1
........... (complete)
loading symbol table
loading System Directory(boot.sys) to MFS
....
Loading MFSFILES directory (bootfs) to MFS
......
Launching /stand/vmunix
SIZE: Text:22623K + Data:5457K + BSS:3802K = Total:31882K

Console is on a Serial Device
Booting kernel...


Memory Class Setup
-------------------------------------------------------------------------
Class     Physmem              Lockmem              Swapmem
-------------------------------------------------------------------------
System :  2036 MB              2036 MB              2036 MB            
Kernel :  2036 MB              2036 MB              2036 MB            
User   :  1762 MB              1534 MB              1540 MB            
-------------------------------------------------------------------------

Loaded ACPI revision 2.0 tables.
NOTICE: cachefs_link(): File system was registered at index 4.
NOTICE: nfs3_link(): File system was registered at index 7.
td: claimed Tachyon XL2 Fibre Channel Mass Storage card at 0/2/1/0
td: claimed Tachyon XL2 Fibre Channel Mass Storage card at 0/4/1/0
Boot device's HP-UX HW path is: 0.1.1.0.0.0
igelan1: INITIALIZING HP PCI 1000Base-T Core at hardware path 0/1/2/0

    System Console is on the Built-In Serial Interface
Logical volume 64, 0x3 configured as ROOT
Logical volume 64, 0x2 configured as SWAP
    Swap device table:  (start & size given in 512-byte blocks)
        entry 0 - major is 64, minor is 0x2; start = 0, size = 8388608
Starting the STREAMS daemons-phase 1
Checking root file system.
log replay in progress
replay complete - marking super-block as CLEAN
Root check done.
Create STCP device files
Starting the STREAMS daemons-phase 2
     $Revision: vmunix:    B11.23_LR FLAVOR=perf Fri Aug 29 22:35:38 PDT 2003 $
Memory Information:
    physical page size = 4096 bytes, logical page size = 4096 bytes
    Physical: 2085640 Kbytes, lockable: 1397456 Kbytes, available: 1629888 Kbytes

/sbin/ioinitrc:
/dev/vg00/lvol1:log replay in progress
/dev/vg00/lvol1:replay complete - marking super-block as CLEAN
/sbin/krs_sysinit:
       * The module 'ipf' has been loaded.
       * The module 'rng' has been loaded.

insf: Installing special files for sctl instance 41 address 0/2/1/0.3.1.0.0.0.0
insf: Installing special files for ipmi instance 0 address 250/0

/sbin/bcheckrc:
Checking for LVM volume groups and Activating (if any exist)
Volume group "/dev/vg00" has been successfully changed.
Activated volume group
Volume group "/dev/vg01" has been successfully changed.
vgchange: Warning: Couldn't attach to the volume group physical volume "/dev/dsk/c8t0d1":
Cross-device link
Activated volume group
Volume group "/dev/vg02" has been successfully changed.
Activated volume group
Volume group "/dev/vg02new" has been successfully changed.
vxfs fsck: sanity check: root file system OK (mounted read/write)
Checking vxfs file systems
vxfs fsck: /dev/vg00/rlvol3:/dev/vg00/rlvol3 is currently mounted
vxfs fsck: /dev/vg00/rlvol1:/dev/vg00/rlvol1 is currently mounted
Running parallel replay fsck ...
/dev/vg01/rlv41:file system is clean - log replay is not required
/dev/vg01/rlv40:file system is clean - log replay is not required
/dev/vg02/rlv52:file system is clean - log replay is not required
/dev/vg02/rlv51:file system is clean - log replay is not required
/dev/vg00/rlvol8:file system is clean - log replay is not required
/dev/vg00/rlvol6:file system is clean - log replay is not required
/dev/vg00/rlvo29:file system is clean - log replay is not required
/dev/vg00/rlvol7:file system is clean - log replay is not required
/dev/vg00/rlvo28:file system is clean - log replay is not required
/dev/vg00/rlvo30:file system is clean - log replay is not required


一直停在这卡住不动了，貌似是VG00里的几个LV挂不上。怎么处理啊。VG00是我的系统盘卷组，VG01，VG02分别是我的两个存储。谢谢大家啊。等待高手指点啊。

yesday007

td: claimed Tachyon XL2 Fibre Channel Mass Storage card at 0/2/1/0
insf: Installing special files for sctl instance 41 address 0/2/1/0.3.1.0.0.0.0
vgchange: Warning: Couldn't attach to the volume group physical volume "/dev/dsk/c8t0d1":
似乎你VG01的盘不见了一块，或者链路不在了一条，或者你可以试试从单用户启动，然后vi fstab暂时不启动除vg00以外的vg
之后在init 3 搞好vg01在修改fstab回来。

lbseraph

vg01应该还是可以active的，建议先进单用户挨个启动VG，看启动哪个或某个文件系统出现问题就先解决掉，然后再init 3。

yarcce

自己解决了，是VG02通过HBA和系统自动挂载，VG02这个存储的映射有问题。多谢各位热心的朋友啊。