免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
12下一页
最近访问板块 发新帖
查看: 6276 | 回复: 15

[系统管理] ssh连接问题 [复制链接]

论坛徽章:
0
发表于 2013-11-15 14:08 |显示全部楼层
大家好,今天遇到了一个ssh问题,ssh居然断开连接,不让用户登陆,不管是哪个用户登录丢不可以。(普通用户  root用户都不可以)hosts.allow和host.deny都没有添加任何信息。
确定ssh配置文件没有修改过。

pam下的login文件如下:
# cat /etc/pam.d/login
#%PAM-1.0
auth [user_unknown=ignore success=ok ignore=ignore default=bad] pam_securetty.so
auth       include      system-auth
account    required     pam_nologin.so
account    include      system-auth
password   include      system-auth
# pam_selinux.so close should be the first session rule
session    required     pam_selinux.so close
session    optional     pam_keyinit.so force revoke
session    required     pam_loginuid.so
session    include      system-auth
session    optional     pam_console.so
# pam_selinux.so open should only be followed by sessions to be executed in the user context
session    required     pam_selinux.so open


pam下的sshd文件如下:
# cat /etc/pam.d/sshd
#%PAM-1.0
auth       include      system-auth
account    required     pam_nologin.so
account    include      system-auth
password   include      system-auth
session    optional     pam_keyinit.so force revoke
session    include      system-auth
session    required     pam_loginuid.so

message内核信息报错如下:
Nov 15 13:51:18 localhost kernel: sshd[19484] general protection rip:2b0d20f1b2d0 rsp:7ffff4edbbf8 error:0
Nov 15 13:51:18 localhost kernel: sshd[19485] general protection rip:2b0d20f1b2d0 rsp:7ffff4edbbf8 error:0
Nov 15 13:51:19 localhost kernel: sshd[19486] general protection rip:2b0d20f1b2d0 rsp:7ffff4edbbf8 error:0
Nov 15 13:51:19 localhost kernel: sshd[19487] general protection rip:2b0d20f1b2d0 rsp:7ffff4edbbf8 error:0
Nov 15 13:51:19 localhost kernel: sshd[19488] general protection rip:2b0d20f1b2d0 rsp:7ffff4edbbf8 error:0
Nov 15 13:51:20 localhost kernel: sshd[19489] general protection rip:2b0d20f1b2d0 rsp:7ffff4edbbf8 error:0
Nov 15 13:51:20 localhost kernel: sshd[19490] general protection rip:2b0d20f1b2d0 rsp:7ffff4edbbf8 error:0

secure日志如下:
Nov 15 11:19:19 localhostlogin: FAILED LOGIN 1 FROM localhost.localdomain FOR root, Authentication failure
Nov 15 11:19:20 localhost login: pam_securetty(remote:auth): access denied: tty 'pts/1' is not secure !
Nov 15 11:19:25 localhostlogin: FAILED LOGIN 2 FROM localhost.localdomain FOR root, Authentication failure
Nov 15 11:24:12 localhost login: pam_unix(remote:auth): authentication failure; logname= uid=0 euid=0 tty=pts/1 ruser= rhost=localhost.localdomain  user=zhangshuao
Nov 15 11:24:15 localhost login: FAILED LOGIN 1 FROM localhost.localdomain FOR zhangshuao, Authentication failure
Nov 15 11:24:19 localhost login: pam_unix(remote:session): session opened for user zhangshuao by (uid=0)
Nov 15 11:24:19 localhostlogin: LOGIN ON pts/1 BY zhangshuao FROM localhost.localdomain
Nov 15 11:24:27 localhost su: pam_unix(su:session): session opened for user root by zhangshuao(uid=502)
Nov 15 11:25:06 localhost su: pam_unix(su:session): session closed for user root
Nov 15 11:25:12 localhost login: pam_unix(remote:session): session closed for user zhangshuao

我又开启了telnet服务来连接,配置完了重启以后  就连接了一次,之后在连接的话,telnet服务就拒绝连接了。


大家帮忙看看是啥问题。


论坛徽章:
381
CU十二周年纪念徽章
日期:2014-01-04 22:46:58CU大牛徽章
日期:2013-03-13 15:32:35CU大牛徽章
日期:2013-03-13 15:38:15CU大牛徽章
日期:2013-03-13 15:38:52CU大牛徽章
日期:2013-03-14 14:08:55CU大牛徽章
日期:2013-04-17 11:17:19CU大牛徽章
日期:2013-04-17 11:17:32CU大牛徽章
日期:2013-04-17 11:17:37CU大牛徽章
日期:2013-04-17 11:17:42CU大牛徽章
日期:2013-04-17 11:17:47CU大牛徽章
日期:2013-04-17 11:17:52CU大牛徽章
日期:2013-04-17 11:17:56
发表于 2013-11-15 15:23 |显示全部楼层
将pts/1添加到/etc/securetty看看,如果不行,注释下 /etc/pam.d/login里面的auth [user_unknown=ignore success=ok ignore=ignore default=bad] pam_securetty.so行

论坛徽章:
0
发表于 2013-11-15 15:32 |显示全部楼层
回复 2# chenyx


    不行 ,试过了。

论坛徽章:
381
CU十二周年纪念徽章
日期:2014-01-04 22:46:58CU大牛徽章
日期:2013-03-13 15:32:35CU大牛徽章
日期:2013-03-13 15:38:15CU大牛徽章
日期:2013-03-13 15:38:52CU大牛徽章
日期:2013-03-14 14:08:55CU大牛徽章
日期:2013-04-17 11:17:19CU大牛徽章
日期:2013-04-17 11:17:32CU大牛徽章
日期:2013-04-17 11:17:37CU大牛徽章
日期:2013-04-17 11:17:42CU大牛徽章
日期:2013-04-17 11:17:47CU大牛徽章
日期:2013-04-17 11:17:52CU大牛徽章
日期:2013-04-17 11:17:56
发表于 2013-11-15 15:41 |显示全部楼层
停止ssh服务,修改下ssh端口,再启动ssh服务试试看看

论坛徽章:
0
发表于 2013-11-15 15:46 |显示全部楼层
回复 4# chenyx


    内核报错一大堆信息,你帮我看看兄弟。 我刚才重启了,现在用的telnet服务连的。我开启ssh服务  端口起不来,监听不到  
message信息如下:
Nov 15 15:34:58 Nginx shutdown[20061]: shutting down for system reboot
Nov 15 15:34:58 Nginx init: Switching to runlevel: 6
Nov 15 15:35:01 Nginx xinetd[19882]: Exiting...
Nov 15 15:35:01 Nginx kernel: Kernel logging (proc) stopped.
Nov 15 15:35:01 Nginx kernel: Kernel log daemon terminating.
Nov 15 15:35:02 Nginx exiting on signal 15
Nov 15 15:37:03 Nginx syslogd 1.4.1: restart.
Nov 15 15:37:03 Nginx kernel: klogd 1.4.1, log source = /proc/kmsg started.
Nov 15 15:37:03 Nginx kernel: Linux version 2.6.18-371.1.2.el5 (mockbuild@builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-54)) #1 SMP Tue Oct 22 12:51:53 EDT 2013
Nov 15 15:37:03 Nginx kernel: Command line: ro root=/dev/VolGroup00/LogVol00
Nov 15 15:37:03 Nginx kernel: BIOS-provided physical RAM map:
Nov 15 15:37:03 Nginx kernel:  BIOS-e820: 0000000000010000 - 00000000000a0000 (usable)
Nov 15 15:37:03 Nginx kernel:  BIOS-e820: 0000000000100000 - 00000000cfeb2000 (usable)
Nov 15 15:37:03 Nginx kernel:  BIOS-e820: 00000000cfeb2000 - 00000000cfec8000 (reserved)
Nov 15 15:37:03 Nginx kernel:  BIOS-e820: 00000000cfec8000 - 00000000cfee7c00 (ACPI data)
Nov 15 15:37:03 Nginx kernel:  BIOS-e820: 00000000cfee7c00 - 00000000d0000000 (reserved)
Nov 15 15:37:03 Nginx kernel:  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Nov 15 15:37:03 Nginx kernel:  BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
Nov 15 15:37:03 Nginx kernel:  BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
Nov 15 15:37:03 Nginx kernel: DMI 2.5 present.
Nov 15 15:37:04 Nginx kernel: No NUMA configuration found
Nov 15 15:37:04 Nginx kernel: Faking a node at 0000000000000000-0000000230000000
Nov 15 15:37:04 Nginx kernel: Bootmem setup node 0 0000000000000000-0000000230000000
Nov 15 15:37:04 Nginx kernel: Memory for crash kernel (0x0 to 0x0) notwithin permissible range
Nov 15 15:37:04 Nginx kernel: disabling kdump
Nov 15 15:37:04 Nginx kernel: ACPI: PM-Timer IO Port: 0x808
Nov 15 15:37:04 Nginx kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Nov 15 15:37:04 Nginx kernel: Processor #0 6:15 APIC version 20
Nov 15 15:37:04 Nginx kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Nov 15 15:37:04 Nginx kernel: Processor #1 6:15 APIC version 20
Nov 15 15:37:04 Nginx kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
Nov 15 15:37:04 Nginx kernel: Processor #2 6:15 APIC version 20
Nov 15 15:37:04 Nginx kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
Nov 15 15:37:04 Nginx kernel: Processor #3 6:15 APIC version 20
Nov 15 15:37:04 Nginx kernel: ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
Nov 15 15:37:04 Nginx kernel: ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
Nov 15 15:37:04 Nginx kernel: IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
Nov 15 15:37:04 Nginx kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Nov 15 15:37:04 Nginx kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Nov 15 15:37:04 Nginx kernel: Setting APIC routing to physical flat
Nov 15 15:37:04 Nginx kernel: ACPI: HPET id: 0x8086a301 base: 0xfed00000
Nov 15 15:37:04 Nginx kernel: Using ACPI (MADT) for SMP configuration information
Nov 15 15:37:04 Nginx kernel: Nosave address range: 00000000000a0000 - 0000000000100000
Nov 15 15:37:04 Nginx kernel: Nosave address range: 00000000cfeb2000 - 00000000cfec8000
Nov 15 15:37:04 Nginx kernel: Nosave address range: 00000000cfec8000 - 00000000cfee7000
Nov 15 15:37:04 Nginx kernel: Nosave address range: 00000000cfee7000 - 00000000cfee8000
Nov 15 15:37:04 Nginx kernel: Nosave address range: 00000000cfee8000 - 00000000d0000000
Nov 15 15:37:04 Nginx kernel: Nosave address range: 00000000d0000000 - 00000000e0000000
Nov 15 15:37:04 Nginx kernel: Nosave address range: 00000000e0000000 - 00000000f0000000
Nov 15 15:37:04 Nginx kernel: Nosave address range: 00000000f0000000 - 00000000fe000000
Nov 15 15:37:04 Nginx kernel: Nosave address range: 00000000fe000000 - 0000000100000000
Nov 15 15:37:04 Nginx kernel: Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
Nov 15 15:37:04 Nginx kernel: SMP: Allowing 4 CPUs, 0 hotplug CPUs
Nov 15 15:37:04 Nginx kernel: Built 1 zonelists.  Total pages: 2063833
Nov 15 15:37:04 Nginx kernel: Kernel command line: ro root=/dev/VolGroup00/LogVol00
Nov 15 15:37:04 Nginx kernel: Initializing CPU#0
Nov 15 15:37:04 Nginx kernel: PID hash table entries: 4096 (order: 12, 32768 bytes)
Nov 15 15:37:04 Nginx kernel: Console: colour VGA+ 80x25
Nov 15 15:37:04 Nginx kernel: Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Nov 15 15:37:04 Nginx kernel: Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Nov 15 15:37:04 Nginx kernel: Checking aperture...
Nov 15 15:37:04 Nginx kernel: ACPI: DMAR not present
Nov 15 15:37:04 Nginx kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Nov 15 15:37:04 Nginx kernel: Placing software IO TLB between 0x1c3c000 - 0x5c3c000
Nov 15 15:37:04 Nginx kernel: Memory: 8173116k/9175040k available (2629k kernel code, 213708k reserved, 1679k data, 224k init)
Nov 15 15:37:04 Nginx kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.17 BogoMIPS (lpj=2400086)
Nov 15 15:37:04 Nginx kernel: Security Framework v1.0.0 initialized
Nov 15 15:37:04 Nginx kernel: SELinux:  Initializing.
Nov 15 15:37:04 Nginx kernel: selinux_register_security:  Registering secondary module capability
Nov 15 15:37:04 Nginx kernel: Capability LSM initialized as secondary
Nov 15 15:37:04 Nginx kernel: Mount-cache hash table entries: 256
Nov 15 15:37:04 Nginx kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Nov 15 15:37:04 Nginx kernel: CPU: L2 cache: 4096K
Nov 15 15:37:04 Nginx kernel: using mwait in idle threads.
Nov 15 15:37:04 Nginx kernel: CPU: Physical Processor ID: 0
Nov 15 15:37:04 Nginx kernel: CPU: Processor Core ID: 0
Nov 15 15:37:04 Nginx kernel: CPU0: Thermal monitoring enabled (TM1)
Nov 15 15:37:04 Nginx kernel: SMP alternatives: switching to UP code
Nov 15 15:37:04 Nginx kernel: ACPI: Core revision 20060707
Nov 15 15:37:04 Nginx kernel: Using local APIC timer interrupts.
Nov 15 15:37:04 Nginx kernel: Detected 16.667 MHz APIC timer.
Nov 15 15:37:04 Nginx kernel: SMP alternatives: switching to SMP code
Nov 15 15:37:04 Nginx kernel: Booting processor 1/4 APIC 0x1
Nov 15 15:37:04 Nginx kernel: Initializing CPU#1
Nov 15 15:37:04 Nginx kernel: Calibrating delay using timer specific routine.. 4800.21 BogoMIPS (lpj=2400106)
Nov 15 15:37:04 Nginx kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Nov 15 15:37:04 Nginx kernel: CPU: L2 cache: 4096K
Nov 15 15:37:04 Nginx kernel: CPU: Physical Processor ID: 0
Nov 15 15:37:04 Nginx kernel: CPU: Processor Core ID: 1
Nov 15 15:37:04 Nginx kernel: CPU1: Thermal monitoring enabled (TM2)
Nov 15 15:37:04 Nginx kernel: Intel(R) Xeon(R) CPU           X3220  @ 2.40GHz stepping 0b
Nov 15 15:37:04 Nginx kernel: SMP alternatives: switching to SMP code
Nov 15 15:37:04 Nginx kernel: Booting processor 2/4 APIC 0x2
Nov 15 15:37:04 Nginx kernel: Initializing CPU#2
Nov 15 15:37:04 Nginx kernel: Calibrating delay using timer specific routine.. 4800.15 BogoMIPS (lpj=240007
Nov 15 15:37:04 Nginx kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Nov 15 15:37:04 Nginx kernel: CPU: L2 cache: 4096K
Nov 15 15:37:04 Nginx kernel: CPU: Physical Processor ID: 0
Nov 15 15:37:04 Nginx kernel: CPU: Processor Core ID: 2
Nov 15 15:37:04 Nginx kernel: CPU2: Thermal monitoring enabled (TM2)
Nov 15 15:37:04 Nginx kernel: Intel(R) Xeon(R) CPU           X3220  @ 2.40GHz stepping 0b
Nov 15 15:37:04 Nginx kernel: SMP alternatives: switching to SMP code
Nov 15 15:37:04 Nginx kernel: Booting processor 3/4 APIC 0x3
Nov 15 15:37:04 Nginx kernel: Initializing CPU#3
Nov 15 15:37:04 Nginx kernel: Calibrating delay using timer specific routine.. 4800.09 BogoMIPS (lpj=240004
Nov 15 15:37:04 Nginx kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Nov 15 15:37:04 Nginx kernel: CPU: L2 cache: 4096K
Nov 15 15:37:04 Nginx kernel: CPU: Physical Processor ID: 0
Nov 15 15:37:04 Nginx kernel: CPU: Processor Core ID: 3
Nov 15 15:37:04 Nginx kernel: CPU3: Thermal monitoring enabled (TM2)
Nov 15 15:37:04 Nginx kernel: Intel(R) Xeon(R) CPU           X3220  @ 2.40GHz stepping 0b
Nov 15 15:37:04 Nginx kernel: Brought up 4 CPUs
Nov 15 15:37:04 Nginx kernel: NMI watchdog testing PASSED.
Nov 15 15:37:04 Nginx kernel: time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
Nov 15 15:37:04 Nginx kernel: time.c: Detected 2400.086 MHz processor.
Nov 15 15:37:04 Nginx kernel: migration_cost=19,3254
Nov 15 15:37:04 Nginx kernel: checking if image is initramfs... it is
Nov 15 15:37:04 Nginx kernel: Freeing initrd memory: 3419k freed
Nov 15 15:37:04 Nginx kernel: NET: Registered protocol family 16
Nov 15 15:37:04 Nginx kernel: ACPI: bus type pci registered
Nov 15 15:37:04 Nginx kernel: PCI: Using MMCONFIG at e0000000
Nov 15 15:37:04 Nginx kernel: ACPI: Interpreter enabled
Nov 15 15:37:04 Nginx kernel: ACPI: Using IOAPIC for interrupt routing
Nov 15 15:37:04 Nginx kernel: ACPI: No dock devices found.
Nov 15 15:37:04 Nginx kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Nov 15 15:37:04 Nginx kernel: pci 0000:00:01.0: PCI bridge to [bus 01-01]
Nov 15 15:37:04 Nginx kernel: pci 0000:00:1c.0: PCI bridge to [bus 02-02]
Nov 15 15:37:04 Nginx kernel: pci 0000:00:1c.4: PCI bridge to [bus 03-03]
Nov 15 15:37:04 Nginx kernel: pci 0000:00:1c.5: PCI bridge to [bus 04-04]
Nov 15 15:37:04 Nginx kernel: pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
Nov 15 15:37:04 Nginx kernel: ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 12 14 *15)
Nov 15 15:37:04 Nginx kernel: ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 12 *14 15)
Nov 15 15:37:04 Nginx kernel: ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Nov 15 15:37:04 Nginx kernel: ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Nov 15 15:37:04 Nginx kernel: ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Nov 15 15:37:04 Nginx kernel: ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Nov 15 15:37:04 Nginx kernel: ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Nov 15 15:37:04 Nginx kernel: ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 *6 7 10 11 12 14 15)
Nov 15 15:37:04 Nginx kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Nov 15 15:37:04 Nginx kernel: pnp: PnP ACPI init
Nov 15 15:37:04 Nginx kernel: pnp: PnP ACPI: found 12 devices
Nov 15 15:37:04 Nginx kernel: usbcore: registered new driver usbfs
Nov 15 15:37:04 Nginx kernel: usbcore: registered new driver hub
Nov 15 15:37:04 Nginx kernel: PCI: Using ACPI for IRQ routing
Nov 15 15:37:04 Nginx kernel: PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Nov 15 15:37:04 Nginx kernel: NetLabel: Initializing
Nov 15 15:37:04 Nginx kernel: NetLabel:  domain hash size = 128
Nov 15 15:37:04 Nginx kernel: NetLabel:  protocols = UNLABELED CIPSOv4
Nov 15 15:37:04 Nginx kernel: NetLabel:  unlabeled traffic allowed by default
Nov 15 15:37:04 Nginx kernel: hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0, 0
Nov 15 15:37:04 Nginx kernel: hpet0: 4 64-bit timers, 14318180 Hz
Nov 15 15:37:04 Nginx kernel: ACPI: DMAR not present
Nov 15 15:37:04 Nginx kernel: PCI-GART: No AMD northbridge found.
Nov 15 15:37:04 Nginx kernel: system 00:08: ioport range 0x800-0x87f could not be reserved
Nov 15 15:37:04 Nginx kernel: system 00:08: ioport range 0x880-0x8bf has been reserved
Nov 15 15:37:04 Nginx kernel: system 00:08: ioport range 0x8c0-0x8df has been reserved
Nov 15 15:37:04 Nginx kernel: system 00:08: ioport range 0x8e0-0x8e3 has been reserved
Nov 15 15:37:04 Nginx kernel: system 00:08: ioport range 0x900-0x900 has been reserved
Nov 15 15:37:04 Nginx kernel: system 00:08: ioport range 0xc00-0xc0f has been reserved
Nov 15 15:37:04 Nginx kernel: system 00:08: ioport range 0xc10-0xc1f has been reserved
Nov 15 15:37:04 Nginx kernel: system 00:08: ioport range 0xca0-0xca7 has been reserved
Nov 15 15:37:04 Nginx kernel: system 00:09: ioport range 0xca8-0xca8 has been reserved
Nov 15 15:37:04 Nginx kernel: system 00:09: ioport range 0xcac-0xcac has been reserved
Nov 15 15:37:04 Nginx kernel: system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
Nov 15 15:37:04 Nginx kernel: pci 0000:00:01.0: PCI bridge to [bus 01-01]
Nov 15 15:37:04 Nginx kernel: pci 0000:00:01.0:   bridge window [io  disabled]
Nov 15 15:37:04 Nginx kernel: pci 0000:00:01.0:   bridge window [mem disabled]
Nov 15 15:37:04 Nginx kernel: pci 0000:00:01.0:   bridge window [mem pref disabled]
Nov 15 15:37:05 Nginx kernel: pci 0000:00:1c.0: PCI bridge to [bus 02-02]
Nov 15 15:37:05 Nginx kernel: pci 0000:00:1c.0:   bridge window [io  disabled]
Nov 15 15:37:05 Nginx kernel: pci 0000:00:1c.0:   bridge window [mem disabled]
Nov 15 15:37:05 Nginx kernel: pci 0000:00:1c.0:   bridge window [mem pref disabled]
Nov 15 15:37:05 Nginx kernel: pci 0000:00:1c.4: PCI bridge to [bus 03-03]
Nov 15 15:37:05 Nginx kernel: pci 0000:00:1c.4:   bridge window [io  disabled]
Nov 15 15:37:05 Nginx kernel: pci 0000:00:1c.4:   bridge window [mem 0xdfd00000-0xdfdfffff]
Nov 15 15:37:05 Nginx kernel: pci 0000:00:1c.4:   bridge window [mem pref disabled]
Nov 15 15:37:05 Nginx kernel: pci 0000:00:1c.5: PCI bridge to [bus 04-04]
Nov 15 15:37:05 Nginx kernel: pci 0000:00:1c.5:   bridge window [io  disabled]
Nov 15 15:37:05 Nginx kernel: pci 0000:00:1c.5:   bridge window [mem 0xdfe00000-0xdfefffff]
Nov 15 15:37:05 Nginx kernel: pci 0000:00:1c.5:   bridge window [mem pref disabled]
Nov 15 15:37:05 Nginx kernel: pci 0000:05:05.0: BAR 6: assigned [mem 0xdff00000-0xdff1ffff pref]
Nov 15 15:37:05 Nginx kernel: pci 0000:00:1e.0: PCI bridge to [bus 05-05]
Nov 15 15:37:05 Nginx kernel: pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
Nov 15 15:37:05 Nginx kernel: pci 0000:00:1e.0:   bridge window [mem 0xdff00000-0xdfffffff]
Nov 15 15:37:05 Nginx kernel: pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
Nov 15 15:37:05 Nginx kernel: GSI 16 sharing vector 0xA9 and IRQ 16
Nov 15 15:37:05 Nginx kernel: ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
Nov 15 15:37:05 Nginx kernel: ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
Nov 15 15:37:05 Nginx kernel: ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 169
Nov 15 15:37:05 Nginx kernel: GSI 17 sharing vector 0xB1 and IRQ 17
Nov 15 15:37:05 Nginx kernel: ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 177
Nov 15 15:37:05 Nginx kernel: NET: Registered protocol family 2
Nov 15 15:37:05 Nginx kernel: IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
Nov 15 15:37:05 Nginx kernel: TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
Nov 15 15:37:05 Nginx kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Nov 15 15:37:05 Nginx kernel: TCP: Hash tables configured (established 262144 bind 65536)
Nov 15 15:37:05 Nginx kernel: TCP reno registered
Nov 15 15:37:05 Nginx kernel: audit: initializing netlink socket (disabled)
Nov 15 15:37:05 Nginx kernel: type=2000 audit(1384500963.326:1): initialized
Nov 15 15:37:05 Nginx kernel: Total HugeTLB memory allocated, 0
Nov 15 15:37:05 Nginx kernel: VFS: Disk quotas dquot_6.5.1
Nov 15 15:37:05 Nginx kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Nov 15 15:37:05 Nginx kernel: Initializing Cryptographic API
Nov 15 15:37:05 Nginx kernel: alg: No test for crc32c (crc32c-generic)
Nov 15 15:37:05 Nginx kernel: ksign: Installing public key data
Nov 15 15:37:05 Nginx kernel: Loading keyring
Nov 15 15:37:05 Nginx kernel: - Added public key 84F96B37AF099727
Nov 15 15:37:05 Nginx kernel: - User ID: CentOS (Kernel Module GPG key)
Nov 15 15:37:05 Nginx kernel: io scheduler noop registered
Nov 15 15:37:05 Nginx xinetd[2074]: xinetd Version 2.3.14 started with libwrap loadavg labeled-networking options compiled in.
Nov 15 15:37:05 Nginx kernel: io scheduler anticipatory registered
Nov 15 15:37:05 Nginx xinetd[2074]: Started working: 1 available service
Nov 15 15:37:05 Nginx kernel: io scheduler deadline registered
Nov 15 15:37:05 Nginx kernel: io scheduler cfq registered (default)
Nov 15 15:37:05 Nginx kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Nov 15 15:37:05 Nginx kernel: Real Time Clock Driver v1.12ac
Nov 15 15:37:05 Nginx kernel: Non-volatile memory driver v1.2
Nov 15 15:37:05 Nginx kernel: Linux agpgart interface v0.101 (c) Dave Jones
Nov 15 15:37:05 Nginx kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Nov 15 15:37:05 Nginx kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Nov 15 15:37:05 Nginx kernel: 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Nov 15 15:37:05 Nginx kernel: pnp: Device 00:07 activated.
Nov 15 15:37:05 Nginx kernel: 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Nov 15 15:37:05 Nginx kernel: brd: module loaded
Nov 15 15:37:05 Nginx kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 15 15:37:05 Nginx kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 15 15:37:05 Nginx kernel: ide-floppy driver 0.99.newide
Nov 15 15:37:05 Nginx kernel: usbcore: registered new driver hiddev
Nov 15 15:37:05 Nginx kernel: usbcore: registered new driver usbhid
Nov 15 15:37:05 Nginx kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Nov 15 15:37:05 Nginx kernel: PNP: No PS/2 controller found. Probing ports directly.
Nov 15 15:37:05 Nginx kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Nov 15 15:37:05 Nginx kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Nov 15 15:37:05 Nginx kernel: mice: PS/2 mouse device common for all mice
Nov 15 15:37:05 Nginx kernel: md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
Nov 15 15:37:05 Nginx kernel: md: bitmap version 4.39
Nov 15 15:37:05 Nginx kernel: TCP bic registered
Nov 15 15:37:05 Nginx kernel: Initializing IPsec netlink socket
Nov 15 15:37:05 Nginx kernel: NET: Registered protocol family 1
Nov 15 15:37:05 Nginx kernel: NET: Registered protocol family 17
Nov 15 15:37:05 Nginx kernel: ACPI: (supports S0 S4 S5)
Nov 15 15:37:05 Nginx kernel: Initalizing network drop monitor service
Nov 15 15:37:05 Nginx kernel: Freeing unused kernel memory: 224k freed
Nov 15 15:37:05 Nginx kernel: Write protecting the kernel read-only data: 533k
Nov 15 15:37:05 Nginx kernel: GSI 18 sharing vector 0xE1 and IRQ 18
Nov 15 15:37:05 Nginx kernel: ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 225
Nov 15 15:37:05 Nginx kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
Nov 15 15:37:05 Nginx kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
Nov 15 15:37:05 Nginx kernel: ehci_hcd 0000:00:1d.7: debug port 1
Nov 15 15:37:05 Nginx kernel: ehci_hcd 0000:00:1d.7: irq 225, io mem 0xdfcffc00
Nov 15 15:37:05 Nginx kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Nov 15 15:37:05 Nginx kernel: usb usb1: configuration #1 chosen from 1 choice
Nov 15 15:37:05 Nginx kernel: hub 1-0:1.0: USB hub found
Nov 15 15:37:05 Nginx kernel: hub 1-0:1.0: 6 ports detected
Nov 15 15:37:05 Nginx kernel: USB Universal Host Controller Interface driver v3.0
Nov 15 15:37:05 Nginx kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 225
Nov 15 15:37:05 Nginx kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Nov 15 15:37:05 Nginx kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Nov 15 15:37:05 Nginx kernel: uhci_hcd 0000:00:1d.0: irq 225, io base 0x0000dc60
Nov 15 15:37:05 Nginx kernel: usb usb2: configuration #1 chosen from 1 choice
Nov 15 15:37:05 Nginx kernel: hub 2-0:1.0: USB hub found
Nov 15 15:37:05 Nginx kernel: hub 2-0:1.0: 2 ports detected
Nov 15 15:37:05 Nginx kernel: GSI 19 sharing vector 0xE9 and IRQ 19
Nov 15 15:37:05 Nginx kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 20 (level, low) -> IRQ 233
Nov 15 15:37:05 Nginx kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Nov 15 15:37:05 Nginx kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
Nov 15 15:37:05 Nginx kernel: uhci_hcd 0000:00:1d.1: irq 233, io base 0x0000dc80
Nov 15 15:37:05 Nginx kernel: usb usb3: configuration #1 chosen from 1 choice
Nov 15 15:37:05 Nginx kernel: hub 3-0:1.0: USB hub found
Nov 15 15:37:05 Nginx kernel: hub 3-0:1.0: 2 ports detected
Nov 15 15:37:05 Nginx kernel: usb 1-5: new high speed USB device using ehci_hcd and address 2
Nov 15 15:37:05 Nginx kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 225
Nov 15 15:37:05 Nginx kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Nov 15 15:37:05 Nginx kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
Nov 15 15:37:05 Nginx kernel: uhci_hcd 0000:00:1d.2: irq 225, io base 0x0000dca0
Nov 15 15:37:05 Nginx kernel: usb usb4: configuration #1 chosen from 1 choice
Nov 15 15:37:05 Nginx kernel: hub 4-0:1.0: USB hub found
Nov 15 15:37:05 Nginx kernel: hub 4-0:1.0: 2 ports detected
Nov 15 15:37:05 Nginx kernel: usb 1-5: configuration #1 chosen from 1 choice
Nov 15 15:37:05 Nginx kernel: hub 1-5:1.0: USB hub found
Nov 15 15:37:05 Nginx kernel: hub 1-5:1.0: 4 ports detected
Nov 15 15:37:05 Nginx kernel: SCSI subsystem initialized
Nov 15 15:37:05 Nginx kernel: GSI 20 sharing vector 0x32 and IRQ 20
Nov 15 15:37:05 Nginx kernel: ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 23 (level, low) -> IRQ 50
Nov 15 15:37:05 Nginx kernel: ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
Nov 15 15:37:05 Nginx kernel: scsi0 : ata_piix
Nov 15 15:37:05 Nginx kernel: scsi1 : ata_piix
Nov 15 15:37:05 Nginx kernel: ata1: SATA max UDMA/133 cmd 0xdc30 ctl 0xdc28 bmdma 0xdc40 irq 50
Nov 15 15:37:05 Nginx kernel: ata2: SATA max UDMA/133 cmd 0xdc38 ctl 0xdc2c bmdma 0xdc48 irq 50
Nov 15 15:37:05 Nginx kernel: ata1.01: exception Emask 0x10 SAct 0x0 SErr 0x4050000 action 0x0 frozen
Nov 15 15:37:05 Nginx kernel: ata1: SError: { PHYRdyChg CommWake DevExch }
Nov 15 15:37:05 Nginx kernel: ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Nov 15 15:37:05 Nginx kernel: ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Nov 15 15:37:05 Nginx kernel: ata1.00: ATA-8: Hitachi HDP725025GLA380, GM2OA5BA, max UDMA/133
Nov 15 15:37:05 Nginx kernel: ata1.00: 488281250 sectors, multi 8: LBA48 NCQ (depth 0/32)
Nov 15 15:37:05 Nginx kernel: ata1.01: ATA-8: ST3500418AS, CC38, max UDMA/133
Nov 15 15:37:05 Nginx kernel: ata1.01: 976773168 sectors, multi 8: LBA48 NCQ (depth 0/32)
Nov 15 15:37:05 Nginx kernel: ata1.00: configured for UDMA/133
Nov 15 15:37:05 Nginx kernel: ata1.01: configured for UDMA/133
Nov 15 15:37:05 Nginx kernel: ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Nov 15 15:37:05 Nginx kernel: ata2.01: SATA link down (SStatus 0 SControl 0)
Nov 15 15:37:05 Nginx kernel: ata2.00: ATAPI: TEAC DVD-ROM DV28SV, D.0J, max UDMA/100
Nov 15 15:37:05 Nginx kernel: ata2.00: configured for UDMA/100
Nov 15 15:37:05 Nginx kernel:   Vendor: ATA       Model: Hitachi HDP72502  Rev: GM2O
Nov 15 15:37:05 Nginx kernel:   Type:   Direct-Access                      ANSI SCSI revision: 05
Nov 15 15:37:05 Nginx kernel: SCSI device sda: 488281250 512-byte hdwr sectors (250000 MB)
Nov 15 15:37:05 Nginx kernel: sda: Write Protect is off
Nov 15 15:37:05 Nginx kernel: SCSI device sda: drive cache: write back
Nov 15 15:37:05 Nginx kernel: SCSI device sda: 488281250 512-byte hdwr sectors (250000 MB)
Nov 15 15:37:05 Nginx kernel: sda: Write Protect is off
Nov 15 15:37:05 Nginx kernel: SCSI device sda: drive cache: write back
Nov 15 15:37:05 Nginx kernel:  sda: sda1 sda2
Nov 15 15:37:05 Nginx kernel: sd 0:0:0:0: Attached scsi disk sda
Nov 15 15:37:05 Nginx kernel:   Vendor: ATA       Model: ST3500418AS       Rev: CC38
Nov 15 15:37:05 Nginx kernel:   Type:   Direct-Access                      ANSI SCSI revision: 05
Nov 15 15:37:05 Nginx kernel: SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
Nov 15 15:37:05 Nginx kernel: sdb: Write Protect is off
Nov 15 15:37:05 Nginx kernel: SCSI device sdb: drive cache: write back
Nov 15 15:37:05 Nginx kernel: SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
Nov 15 15:37:05 Nginx kernel: sdb: Write Protect is off
Nov 15 15:37:05 Nginx kernel: SCSI device sdb: drive cache: write back
Nov 15 15:37:05 Nginx kernel:  sdb: sdb1
Nov 15 15:37:05 Nginx kernel: sd 0:0:1:0: Attached scsi disk sdb
Nov 15 15:37:05 Nginx kernel:   Vendor: TEAC      Model: DVD-ROM DV28SV    Rev: D.0J
Nov 15 15:37:05 Nginx kernel:   Type:   CD-ROM                             ANSI SCSI revision: 05
Nov 15 15:37:05 Nginx kernel: device-mapper: uevent: version 1.0.3
Nov 15 15:37:05 Nginx kernel: device-mapper: ioctl: 4.11.6-ioctl (2011-02-1 initialised: dm-devel@redhat.com
Nov 15 15:37:05 Nginx kernel: device-mapper: dm-raid45: initialized v0.2594l
Nov 15 15:37:05 Nginx kernel: kjournald starting.  Commit interval 5 seconds
Nov 15 15:37:05 Nginx kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 15 15:37:05 Nginx kernel: SELinux:  Disabled at runtime.
Nov 15 15:37:05 Nginx kernel: type=1404 audit(1384500988.652:2): selinux=0 auid=4294967295 ses=4294967295
Nov 15 15:37:05 Nginx kernel: input: PC Speaker as /class/input/input0
Nov 15 15:37:05 Nginx kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Nov 15 15:37:05 Nginx kernel: sd 0:0:1:0: Attached scsi generic sg1 type 0
Nov 15 15:37:05 Nginx kernel: scsi 1:0:0:0: Attached scsi generic sg2 type 5
Nov 15 15:37:05 Nginx kernel: EDAC MC: Ver: 2.0.1 Oct 22 2013
Nov 15 15:37:05 Nginx kernel: tg3.c:v3.123 (March 21, 2012)<6>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 169
Nov 15 15:37:05 Nginx kernel: tg3 0000:03:00.0: eth0: eth0: Tigon3 [partno(BCM95721) rev 4201 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:22:19:d4:36:76
Nov 15 15:37:05 Nginx kernel: tg3 0000:03:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
Nov 15 15:37:05 Nginx kernel: tg3 0000:03:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
Nov 15 15:37:05 Nginx kernel: ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 177
Nov 15 15:37:05 Nginx kernel: tg3 0000:04:00.0: eth1: eth1: Tigon3 [partno(BCM95721) rev 4201 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:22:19:d4:36:77
Nov 15 15:37:05 Nginx kernel: tg3 0000:04:00.0: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
Nov 15 15:37:05 Nginx kernel: tg3 0000:04:00.0: eth1: dma_rwctrl[76180000] dma_mask[64-bit]
Nov 15 15:37:05 Nginx kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Nov 15 15:37:05 Nginx kernel: sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
Nov 15 15:37:05 Nginx kernel: Uniform CD-ROM driver Revision: 3.20
Nov 15 15:37:05 Nginx kernel: EDAC MC0: Giving out device to i3200_edac i3200: DEV 0000:00:00.0
Nov 15 15:37:05 Nginx kernel: floppy0: no floppy controllers found
Nov 15 15:37:05 Nginx kernel: work still pending
Nov 15 15:37:05 Nginx kernel: lp: driver loaded but no devices found
Nov 15 15:37:05 Nginx kernel: ACPI: Power Button (FF) [PWRF]
Nov 15 15:37:05 Nginx kernel: ACPI: Mapper loaded
Nov 15 15:37:05 Nginx kernel: dell-wmi: No known WMI GUID found
Nov 15 15:37:05 Nginx kernel: md: Autodetecting RAID arrays.
Nov 15 15:37:05 Nginx kernel: md: autorun ...
Nov 15 15:37:05 Nginx kernel: md: ... autorun DONE.
Nov 15 15:37:05 Nginx kernel: device-mapper: multipath: version 1.0.6 loaded
Nov 15 15:37:05 Nginx kernel: EXT3 FS on dm-0, internal journal
Nov 15 15:37:05 Nginx kernel: kjournald starting.  Commit interval 5 seconds
Nov 15 15:37:05 Nginx kernel: EXT3 FS on sda1, internal journal
Nov 15 15:37:05 Nginx kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 15 15:37:05 Nginx kernel: Adding 10223608k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:10223608k
Nov 15 15:37:05 Nginx kernel: NET: Registered protocol family 10
Nov 15 15:37:05 Nginx kernel: lo: Disabled Privacy Extensions
Nov 15 15:37:05 Nginx kernel: IPv6 over IPv4 tunneling driver
Nov 15 15:37:05 Nginx kernel: sit0: Disabled Privacy Extensions
Nov 15 15:37:05 Nginx kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Nov 15 15:37:05 Nginx kernel: tg3 0000:03:00.0: eth0: Link is up at 10 Mbps, full duplex
Nov 15 15:37:05 Nginx kernel: tg3 0000:03:00.0: eth0: Flow control is off for TX and off for RX
Nov 15 15:37:05 Nginx kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Nov 15 15:37:05 Nginx kernel: irqbalance[2030]: segfault at 0000000000000001 rip 0000000000000001 rsp 00007fff97209eb8 error 14
Nov 15 15:37:05 Nginx kernel: sshd[2049]: segfault at 0000000000000001 rip 0000000000000001 rsp 00007fffe44ea4b8 error 14
Nov 15 15:37:05 Nginx kernel: cupsd[2062]: segfault at 0000000000000001 rip 0000000000000001 rsp 00007fffffeb14b8 error 14
Nov 15 15:38:00 Nginx xinetd[2074]: START: telnet pid=3643 from=122.102.4.18
Nov 15 15:38:05 Nginx xinetd[2074]: EXIT: telnet status=1 pid=3643 duration=5(sec)
Nov 15 15:38:11 Nginx xinetd[2074]: START: telnet pid=3644 from=122.102.4.18
Nov 15 15:38:16 Nginx xinetd[2074]: EXIT: telnet status=1 pid=3644 duration=5(sec)
Nov 15 15:39:02 Nginx xinetd[2074]: START: telnet pid=3645 from=61.135.193.54
Nov 15 15:40:26 Nginx xinetd[2074]: START: telnet pid=3679 from=61.135.193.53
Nov 15 15:40:31 Nginx xinetd[2074]: EXIT: telnet status=1 pid=3679 duration=5(sec)
Nov 15 15:40:56 Nginx xinetd[2074]: START: telnet pid=3680 from=61.135.193.53
Nov 15 15:43:39 Nginx kernel: sshd[3760]: segfault at 0000000000000001 rip 0000000000000001 rsp 00007fffa8787c08 error 14

论坛徽章:
381
CU十二周年纪念徽章
日期:2014-01-04 22:46:58CU大牛徽章
日期:2013-03-13 15:32:35CU大牛徽章
日期:2013-03-13 15:38:15CU大牛徽章
日期:2013-03-13 15:38:52CU大牛徽章
日期:2013-03-14 14:08:55CU大牛徽章
日期:2013-04-17 11:17:19CU大牛徽章
日期:2013-04-17 11:17:32CU大牛徽章
日期:2013-04-17 11:17:37CU大牛徽章
日期:2013-04-17 11:17:42CU大牛徽章
日期:2013-04-17 11:17:47CU大牛徽章
日期:2013-04-17 11:17:52CU大牛徽章
日期:2013-04-17 11:17:56
发表于 2013-11-15 16:05 |显示全部楼层
  1. segfault
复制代码
这个问题就严重了.你之前做过什么操作没有?比如更新或者安装了什么软件

论坛徽章:
0
发表于 2013-11-15 16:42 |显示全部楼层
回复 6# chenyx


    我做过yum update

论坛徽章:
0
发表于 2013-11-15 16:50 |显示全部楼层
升级内核了还是怎么了
如果升级过内核,先换回旧内核看看

论坛徽章:
381
CU十二周年纪念徽章
日期:2014-01-04 22:46:58CU大牛徽章
日期:2013-03-13 15:32:35CU大牛徽章
日期:2013-03-13 15:38:15CU大牛徽章
日期:2013-03-13 15:38:52CU大牛徽章
日期:2013-03-14 14:08:55CU大牛徽章
日期:2013-04-17 11:17:19CU大牛徽章
日期:2013-04-17 11:17:32CU大牛徽章
日期:2013-04-17 11:17:37CU大牛徽章
日期:2013-04-17 11:17:42CU大牛徽章
日期:2013-04-17 11:17:47CU大牛徽章
日期:2013-04-17 11:17:52CU大牛徽章
日期:2013-04-17 11:17:56
发表于 2013-11-15 18:59 |显示全部楼层
楼上说的有道理,看看是不是内核的问题

论坛徽章:
0
发表于 2013-11-15 19:59 |显示全部楼层
回复 9# chenyx


yum update后的内核信息如下:
# rpm -qa | grep kernel
kernel-2.6.18-308.el5
kernel-headers-2.6.18-371.1.2.el5
kernel-2.6.18-371.1.2.el5
# uname -r
2.6.18-371.1.2.el5

系统版本:CentOS 5.8 64位
# cat /etc/issue
CentOS release 5.8 (Final)
Kernel \r on an \m

CentOS 5.8 64位默认的内核为:
# uname -r
2.6.18-308.el5

    两个内核版本不一致了。我现在该如何做内核升级?

    这是机房的服务器,我能远程升级内核么?没有在线上做过这个内核升级降级的经验。

   
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP