- 论坛徽章:
- 3
|
- Linux version 2.6.18-194.el5 (mockbuild@builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Fri Apr 2 14:58:14 EDT 2010
- Command line: ro root=/dev/VolGroup00/LogVol00
- BIOS-provided physical RAM map:
- BIOS-e820: 0000000000010000 - 00000000000a0000 (usable)
- BIOS-e820: 0000000000100000 - 00000000cf379000 (usable)
- BIOS-e820: 00000000cf379000 - 00000000cf38f000 (reserved)
- BIOS-e820: 00000000cf38f000 - 00000000cf3ce000 (ACPI data)
- BIOS-e820: 00000000cf3ce000 - 00000000d0000000 (reserved)
- BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
- BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
- BIOS-e820: 0000000100000000 - 0000000630000000 (usable)
- DMI 2.6 present.
- ACPI: RSDP (v002 DELL ) @ 0x00000000000f1240
- ACPI: XSDT (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000000f1344
- ACPI: FADT (v003 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000cf3b3f9c
- ACPI: MADT (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000cf3b3478
- ACPI: SPCR (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000cf3b35d8
- ACPI: HPET (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000cf3b362c
- ACPI: DMAR (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000cf3b3668
- ACPI: MCFG (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000cf3b38c4
- ACPI: WD__ (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000cf3b3904
- ACPI: SLIC (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000cf3b3a3c
- ACPI: ERST (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000cf392ef4
- ACPI: HEST (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000cf393164
- ACPI: BERT (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000cf392d74
- ACPI: EINJ (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000cf392da4
- ACPI: SRAT (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000cf3b3bc0
- ACPI: TCPA (v002 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000cf3b3f34
- ACPI: SSDT (v001 INTEL PPM RCM 0x80000001 INTL 0x20061109) @ 0x00000000cf3b7000
- ACPI: DSDT (v001 DELL PE_SC3 0x00000001 INTL 0x20050624) @ 0x0000000000000000
- SRAT: PXM 1 -> APIC 32 -> Node 0
- SRAT: PXM 2 -> APIC 0 -> Node 1
- SRAT: PXM 1 -> APIC 34 -> Node 0
- SRAT: PXM 2 -> APIC 2 -> Node 1
- SRAT: PXM 1 -> APIC 50 -> Node 0
- SRAT: PXM 2 -> APIC 18 -> Node 1
- SRAT: PXM 1 -> APIC 52 -> Node 0
- SRAT: PXM 2 -> APIC 20 -> Node 1
- SRAT: PXM 1 -> APIC 33 -> Node 0
- SRAT: PXM 2 -> APIC 1 -> Node 1
- SRAT: PXM 1 -> APIC 35 -> Node 0
- SRAT: PXM 2 -> APIC 3 -> Node 1
- SRAT: PXM 1 -> APIC 51 -> Node 0
- SRAT: PXM 2 -> APIC 19 -> Node 1
- SRAT: PXM 1 -> APIC 53 -> Node 0
- SRAT: PXM 2 -> APIC 21 -> Node 1
- SRAT: Node 1 PXM 2 0-d0000000
- SRAT: Node 1 PXM 2 0-330000000
- SRAT: Node 0 PXM 1 330000000-630000000
- NUMA: Using 28 for the hash shift.
- Bootmem setup node 0 0000000330000000-0000000630000000
- Bootmem setup node 1 0000000000000000-0000000330000000
- Memory for crash kernel (0x0 to 0x0) notwithin permissible range
- disabling kdump
- On node 0 totalpages: 3102720
- Normal zone: 3102720 pages, LIFO batch:31
- On node 1 totalpages: 3095390
- DMA zone: 2605 pages, LIFO batch:0
- DMA32 zone: 830385 pages, LIFO batch:31
- Normal zone: 2262400 pages, LIFO batch:31
- ACPI: PM-Timer IO Port: 0x808
- ACPI: Local APIC address 0xfee00000
- ACPI: LAPIC (acpi_id[0x01] lapic_id[0x20] enabled)
- Processor #32 6:12 APIC version 21
- ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] enabled)
- Processor #0 6:12 APIC version 21
- ACPI: LAPIC (acpi_id[0x03] lapic_id[0x22] enabled)
- Processor #34 6:12 APIC version 21
- ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
- Processor #2 6:12 APIC version 21
- ACPI: LAPIC (acpi_id[0x05] lapic_id[0x32] enabled)
- Processor #50 6:12 APIC version 21
- ACPI: LAPIC (acpi_id[0x06] lapic_id[0x12] enabled)
- Processor #18 6:12 APIC version 21
- ACPI: LAPIC (acpi_id[0x07] lapic_id[0x34] enabled)
- Processor #52 6:12 APIC version 21
- ACPI: LAPIC (acpi_id[0x08] lapic_id[0x14] enabled)
- Processor #20 6:12 APIC version 21
- ACPI: LAPIC (acpi_id[0x09] lapic_id[0x21] enabled)
- Processor #33 6:12 APIC version 21
- ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x01] enabled)
- Processor #1 6:12 APIC version 21
- ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x23] enabled)
- Processor #35 6:12 APIC version 21
- ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x03] enabled)
- Processor #3 6:12 APIC version 21
- ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x33] enabled)
- Processor #51 6:12 APIC version 21
- ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x13] enabled)
- Processor #19 6:12 APIC version 21
- ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x35] enabled)
- Processor #53 6:12 APIC version 21
- ACPI: LAPIC (acpi_id[0x10] lapic_id[0x15] enabled)
- Processor #21 6:12 APIC version 21
- ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled)
- ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled)
- ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled)
- ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled)
- ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled)
- ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled)
- ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled)
- ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled)
- ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled)
- ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled)
- ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled)
- ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled)
- ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled)
- ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled)
- ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled)
- ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled)
- ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
- ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
- IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
- ACPI: IOAPIC (id[0x01] address[0xfec80000] gsi_base[32])
- IOAPIC[1]: apic_id 1, version 32, address 0xfec80000, GSI 32-55
- ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- ACPI: IRQ0 used by override.
- ACPI: IRQ2 used by override.
- ACPI: IRQ9 used by override.
- Setting APIC routing to clustered
- ACPI: HPET id: 0x8086a301 base: 0xfed00000
- Using ACPI (MADT) for SMP configuration information
- Nosave address range: 00000000000a0000 - 0000000000100000
- Nosave address range: 00000000cf379000 - 00000000cf38f000
- Nosave address range: 00000000cf38f000 - 00000000cf3ce000
- Nosave address range: 00000000cf3ce000 - 00000000d0000000
- Nosave address range: 00000000d0000000 - 00000000e0000000
- Nosave address range: 00000000e0000000 - 00000000f0000000
- Nosave address range: 00000000f0000000 - 00000000fe000000
- Nosave address range: 00000000fe000000 - 0000000100000000
- Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
- SMP: Allowing 32 CPUs, 16 hotplug CPUs
- Built 2 zonelists. Total pages: 6198110
- Kernel command line: ro root=/dev/VolGroup00/LogVol00
- Initializing CPU#0
- PID hash table entries: 4096 (order: 12, 32768 bytes)
- Console: colour VGA+ 80x25
- Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
- Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
- Checking aperture...
- PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- Placing software IO TLB between 0x40a0000 - 0x80a0000
- Memory: 24672316k/25952256k available (2577k kernel code, 480232k reserved, 1305k data, 212k init)
- Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.11 BogoMIPS (lpj=2394055)
- Security Framework v1.0.0 initialized
- SELinux: Initializing.
- SELinux: Starting in permissive mode
- selinux_register_security: Registering secondary module capability
- Capability LSM initialized as secondary
- Mount-cache hash table entries: 256
- CPU: L1 I cache: 32K, L1 D cache: 32K
- CPU: L2 cache: 256K
- CPU: L3 cache: 12288K
- CPU 0/20 -> Node 0
- using mwait in idle threads.
- CPU: Physical Processor ID: 1
- CPU: Processor Core ID: 0
- CPU0: Thermal monitoring enabled (TM1)
- SMP alternatives: switching to UP code
- ACPI: Core revision 20060707
- Using local APIC timer interrupts.
- Detected 8.312 MHz APIC timer.
- SMP alternatives: switching to SMP code
- Booting processor 1/16 APIC 0x0
- Initializing CPU#1
- Calibrating delay using timer specific routine.. 4787.96 BogoMIPS (lpj=2393982)
- CPU: L1 I cache: 32K, L1 D cache: 32K
- CPU: L2 cache: 256K
- CPU: L3 cache: 12288K
- CPU 1/0 -> Node 1
- CPU: Physical Processor ID: 0
- CPU: Processor Core ID: 0
- CPU1: Thermal monitoring enabled (TM1)
- Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
- SMP alternatives: switching to SMP code
- Booting processor 2/16 APIC 0x22
- Initializing CPU#2
- Calibrating delay using timer specific routine.. 4788.06 BogoMIPS (lpj=2394030)
- CPU: L1 I cache: 32K, L1 D cache: 32K
- CPU: L2 cache: 256K
- CPU: L3 cache: 12288K
- CPU 2/22 -> Node 0
- CPU: Physical Processor ID: 1
- CPU: Processor Core ID: 1
- CPU2: Thermal monitoring enabled (TM1)
- Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
- SMP alternatives: switching to SMP code
- Booting processor 3/16 APIC 0x2
- Initializing CPU#3
- Calibrating delay using timer specific routine.. 4788.14 BogoMIPS (lpj=2394074)
- CPU: L1 I cache: 32K, L1 D cache: 32K
- CPU: L2 cache: 256K
- CPU: L3 cache: 12288K
- CPU 3/2 -> Node 1
- CPU: Physical Processor ID: 0
- CPU: Processor Core ID: 1
- CPU3: Thermal monitoring enabled (TM1)
- Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
- SMP alternatives: switching to SMP code
- Booting processor 4/16 APIC 0x32
- Initializing CPU#4
- Calibrating delay using timer specific routine.. 4788.03 BogoMIPS (lpj=2394015)
- CPU: L1 I cache: 32K, L1 D cache: 32K
- CPU: L2 cache: 256K
- CPU: L3 cache: 12288K
- CPU 4/32 -> Node 0
- CPU: Physical Processor ID: 1
- CPU: Processor Core ID: 9
- CPU4: Thermal monitoring enabled (TM1)
- Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
- SMP alternatives: switching to SMP code
- Booting processor 5/16 APIC 0x12
- Initializing CPU#5
- Calibrating delay using timer specific routine.. 4788.10 BogoMIPS (lpj=2394054)
- CPU: L1 I cache: 32K, L1 D cache: 32K
- CPU: L2 cache: 256K
- CPU: L3 cache: 12288K
- CPU 5/12 -> Node 1
- CPU: Physical Processor ID: 0
- CPU: Processor Core ID: 9
- CPU5: Thermal monitoring enabled (TM1)
- Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
- SMP alternatives: switching to SMP code
- Booting processor 6/16 APIC 0x34
- Initializing CPU#6
- Calibrating delay using timer specific routine.. 4788.03 BogoMIPS (lpj=2394017)
- CPU: L1 I cache: 32K, L1 D cache: 32K
- CPU: L2 cache: 256K
- CPU: L3 cache: 12288K
- CPU 6/34 -> Node 0
- CPU: Physical Processor ID: 1
- CPU: Processor Core ID: 10
- CPU6: Thermal monitoring enabled (TM1)
- Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
- SMP alternatives: switching to SMP code
- Booting processor 7/16 APIC 0x14
- Initializing CPU#7
- Calibrating delay using timer specific routine.. 4788.12 BogoMIPS (lpj=2394061)
- CPU: L1 I cache: 32K, L1 D cache: 32K
- CPU: L2 cache: 256K
- CPU: L3 cache: 12288K
- CPU 7/14 -> Node 1
- CPU: Physical Processor ID: 0
- CPU: Processor Core ID: 10
- CPU7: Thermal monitoring enabled (TM1)
- Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
- SMP alternatives: switching to SMP code
- Booting processor 8/16 APIC 0x21
- Initializing CPU#8
- Calibrating delay using timer specific routine.. 4788.03 BogoMIPS (lpj=2394017)
- CPU: L1 I cache: 32K, L1 D cache: 32K
- CPU: L2 cache: 256K
- CPU: L3 cache: 12288K
- CPU 8/21 -> Node 0
- CPU: Physical Processor ID: 1
- CPU: Processor Core ID: 0
- CPU8: Thermal monitoring enabled (TM1)
- Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
- SMP alternatives: switching to SMP code
- Booting processor 9/16 APIC 0x1
- Initializing CPU#9
- Calibrating delay using timer specific routine.. 4788.11 BogoMIPS (lpj=2394056)
- CPU: L1 I cache: 32K, L1 D cache: 32K
- CPU: L2 cache: 256K
- CPU: L3 cache: 12288K
- CPU 9/1 -> Node 1
- CPU: Physical Processor ID: 0
- CPU: Processor Core ID: 0
- CPU9: Thermal monitoring enabled (TM1)
- Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
- SMP alternatives: switching to SMP code
- Booting processor 10/16 APIC 0x23
- Initializing CPU#10
- Calibrating delay using timer specific routine.. 4788.03 BogoMIPS (lpj=2394019)
- CPU: L1 I cache: 32K, L1 D cache: 32K
- CPU: L2 cache: 256K
- CPU: L3 cache: 12288K
- CPU 10/23 -> Node 0
- CPU: Physical Processor ID: 1
- CPU: Processor Core ID: 1
- CPU10: Thermal monitoring enabled (TM1)
- Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
- SMP alternatives: switching to SMP code
- Booting processor 11/16 APIC 0x3
- Initializing CPU#11
- Calibrating delay using timer specific routine.. 4788.13 BogoMIPS (lpj=2394068)
- CPU: L1 I cache: 32K, L1 D cache: 32K
- CPU: L2 cache: 256K
- CPU: L3 cache: 12288K
- CPU 11/3 -> Node 1
- CPU: Physical Processor ID: 0
- CPU: Processor Core ID: 1
- CPU11: Thermal monitoring enabled (TM1)
- Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
- SMP alternatives: switching to SMP code
- Booting processor 12/16 APIC 0x33
- Initializing CPU#12
- Calibrating delay using timer specific routine.. 4788.10 BogoMIPS (lpj=2394050)
- CPU: L1 I cache: 32K, L1 D cache: 32K
- CPU: L2 cache: 256K
- CPU: L3 cache: 12288K
- CPU 12/33 -> Node 0
- CPU: Physical Processor ID: 1
- CPU: Processor Core ID: 9
- CPU12: Thermal monitoring enabled (TM1)
- Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
- SMP alternatives: switching to SMP code
- Booting processor 13/16 APIC 0x13
- Initializing CPU#13
- Calibrating delay using timer specific routine.. 4788.12 BogoMIPS (lpj=2394063)
- CPU: L1 I cache: 32K, L1 D cache: 32K
- CPU: L2 cache: 256K
- CPU: L3 cache: 12288K
- CPU 13/13 -> Node 1
- CPU: Physical Processor ID: 0
- CPU: Processor Core ID: 9
- CPU13: Thermal monitoring enabled (TM1)
- Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
- SMP alternatives: switching to SMP code
- Booting processor 14/16 APIC 0x35
- Initializing CPU#14
- Calibrating delay using timer specific routine.. 4788.04 BogoMIPS (lpj=2394023)
- CPU: L1 I cache: 32K, L1 D cache: 32K
- CPU: L2 cache: 256K
- CPU: L3 cache: 12288K
- CPU 14/35 -> Node 0
- CPU: Physical Processor ID: 1
- CPU: Processor Core ID: 10
- CPU14: Thermal monitoring enabled (TM1)
- Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
- SMP alternatives: switching to SMP code
- Booting processor 15/16 APIC 0x15
- Initializing CPU#15
- Calibrating delay using timer specific routine.. 4788.13 BogoMIPS (lpj=2394068)
- CPU: L1 I cache: 32K, L1 D cache: 32K
- CPU: L2 cache: 256K
- CPU: L3 cache: 12288K
- CPU 15/15 -> Node 1
- CPU: Physical Processor ID: 0
- CPU: Processor Core ID: 10
- CPU15: Thermal monitoring enabled (TM1)
- Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
- Brought up 16 CPUs
- testing NMI watchdog ... OK.
- time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
- time.c: Detected 2394.055 MHz processor.
- sizeof(vma)=176 bytes
- sizeof(page)=56 bytes
- sizeof(inode)=560 bytes
- sizeof(dentry)=216 bytes
- sizeof(ext3inode)=760 bytes
- sizeof(buffer_head)=96 bytes
- sizeof(skbuff)=248 bytes
- migration_cost=2,18,1353
- checking if image is initramfs... it is
- Freeing initrd memory: 3399k freed
- NET: Registered protocol family 16
- ACPI: bus type pci registered
- PCI: Using MMCONFIG at e0000000
- ACPI: Interpreter enabled
- ACPI: Using IOAPIC for interrupt routing
- ACPI: No dock devices found.
- ACPI: PCI Root Bridge [PCI0] (0000:00)
- PCI: Transparent bridge - 0000:00:1e.0
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX9._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBEX._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
- ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15)
- ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 *14 15)
- ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 *11 14 15)
- ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 14 15)
- ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15)
- ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 *6 7 10 11 14 15)
- ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
- ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 *14 15)
- Linux Plug and Play Support v0.97 (c) Adam Belay
- pnp: PnP ACPI init
- pnp: PnP ACPI: found 12 devices
- usbcore: registered new driver usbfs
- usbcore: registered new driver hub
- PCI: Using ACPI for IRQ routing
- PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
- NetLabel: Initializing
- NetLabel: domain hash size = 128
- NetLabel: protocols = UNLABELED CIPSOv4
- NetLabel: unlabeled traffic allowed by default
- hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0, 0
- hpet0: 4 64-bit timers, 14318180 Hz
- DMAR:Host address width 40
- DMAR:DRHD base: 0x000000fed90000 flags: 0x1
- IOMMU fed90000: ver 1:0 cap c90780106f0462 ecap f020fe
- DMAR:RMRR base: 0x000000cf4c8000 end: 0x000000cf4dffff
- DMAR:RMRR base: 0x000000cf4b1000 end: 0x000000cf4bffff
- DMAR:RMRR base: 0x000000cf4a1000 end: 0x000000cf4a1fff
- DMAR:RMRR base: 0x000000cf4a3000 end: 0x000000cf4a3fff
- DMAR:RMRR base: 0x000000cf4a5000 end: 0x000000cf4a5fff
- DMAR:RMRR base: 0x000000cf4a7000 end: 0x000000cf4a7fff
- DMAR:RMRR base: 0x000000cf4c0000 end: 0x000000cf4c0fff
- DMAR:RMRR base: 0x000000cf4c2000 end: 0x000000cf4c2fff
- DMAR:ATSR flags: 0x0
- DMAR:Device scope device [0000:00:1a.02] not found
- DMAR:Device scope device [0000:00:1a.02] not found
- DMAR:Device scope device [0000:00:1d.02] not found
- DMAR:Device scope device [0000:00:1d.02] not found
- PCI-GART: No AMD northbridge found.
- pnp: 00:07: ioport range 0x800-0x87f could not be reserved
- pnp: 00:07: ioport range 0x880-0x8ff has been reserved
- pnp: 00:07: ioport range 0x900-0x91f has been reserved
- pnp: 00:07: ioport range 0x920-0x923 has been reserved
- pnp: 00:07: ioport range 0x924-0x924 has been reserved
- pnp: 00:07: ioport range 0xc00-0xc7f has been reserved
- pnp: 00:07: ioport range 0xca0-0xca7 has been reserved
- pnp: 00:08: ioport range 0xca8-0xca8 has been reserved
- pnp: 00:08: ioport range 0xcac-0xcac has been reserved
- PCI: Bridge: 0000:00:01.0
- IO window: disabled.
- MEM window: d6000000-d9ffffff
- PREFETCH window: disabled.
- PCI: Bridge: 0000:00:03.0
- IO window: disabled.
- MEM window: da000000-ddffffff
- PREFETCH window: disabled.
- PCI: Bridge: 0000:00:07.0
- IO window: disabled.
- MEM window: disabled.
- PREFETCH window: disabled.
- PCI: Bridge: 0000:00:09.0
- IO window: disabled.
- MEM window: disabled.
- PREFETCH window: disabled.
- PCI: Bridge: 0000:00:1c.0
- IO window: f000-ffff
- MEM window: df100000-df2fffff
- PREFETCH window: disabled.
- PCI: Bridge: 0000:00:1e.0
- IO window: disabled.
- MEM window: de000000-deffffff
- PREFETCH window 0x00000000d5800000-0x00000000d5ffffff
- GSI 16 sharing vector 0xA9 and IRQ 16
- ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 53 (level, low) -> IRQ 169
- PCI: Setting latency timer of device 0000:00:01.0 to 64
- ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 53 (level, low) -> IRQ 169
- PCI: Setting latency timer of device 0000:00:03.0 to 64
- ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 53 (level, low) -> IRQ 169
- PCI: Setting latency timer of device 0000:00:07.0 to 64
- ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 53 (level, low) -> IRQ 169
- PCI: Setting latency timer of device 0000:00:09.0 to 64
- GSI 17 sharing vector 0xB1 and IRQ 17
- ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 177
- PCI: Setting latency timer of device 0000:00:1c.0 to 64
- PCI: Setting latency timer of device 0000:00:1e.0 to 64
- NET: Registered protocol family 2
- IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
- TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
- TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- TCP: Hash tables configured (established 262144 bind 65536)
- TCP reno registered
- audit: initializing netlink socket (disabled)
- type=2000 audit(1390777283.479:1): initialized
- Total HugeTLB memory allocated, 0
- VFS: Disk quotas dquot_6.5.1
- Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- SELinux: Registering netfilter hooks
- Initializing Cryptographic API
- alg: No test for crc32c (crc32c-generic)
- ksign: Installing public key data
- Loading keyring
- - Added public key C596239A507DE7FD
- - User ID: CentOS (Kernel Module GPG key)
- io scheduler noop registered
- io scheduler anticipatory registered
- io scheduler deadline registered
- io scheduler cfq registered (default)
- Boot video device is 0000:06:03.0
- PCI: Setting latency timer of device 0000:00:01.0 to 64
- PCI: Setting latency timer of device 0000:00:03.0 to 64
- PCI: Setting latency timer of device 0000:00:07.0 to 64
- PCI: Setting latency timer of device 0000:00:09.0 to 64
- PCI: Setting latency timer of device 0000:00:1c.0 to 64
- pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- ACPI: CPU0 (power states: C1[C1] C2[C3])
- ACPI: CPU1 (power states: C1[C1] C2[C3])
- ACPI: CPU2 (power states: C1[C1] C2[C3])
- ACPI: CPU3 (power states: C1[C1] C2[C3])
- ACPI: CPU4 (power states: C1[C1] C2[C3])
- ACPI: CPU5 (power states: C1[C1] C2[C3])
- ACPI: CPU6 (power states: C1[C1] C2[C3])
- ACPI: CPU7 (power states: C1[C1] C2[C3])
- ACPI: CPU8 (power states: C1[C1] C2[C3])
- ACPI: CPU9 (power states: C1[C1] C2[C3])
- ACPI: CPU10 (power states: C1[C1] C2[C3])
- ACPI: CPU11 (power states: C1[C1] C2[C3])
- ACPI: CPU12 (power states: C1[C1] C2[C3])
- ACPI: CPU13 (power states: C1[C1] C2[C3])
- ACPI: CPU14 (power states: C1[C1] C2[C3])
- ACPI: CPU15 (power states: C1[C1] C2[C3])
- Real Time Clock Driver v1.12ac
- hpet_resources: 0xfed00000 is busy
- Non-volatile memory driver v1.2
- Linux agpgart interface v0.101 (c) Dave Jones
- Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
- serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
- 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
- brd: module loaded
- Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
- ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
- Probing IDE interface ide0...
- Probing IDE interface ide1...
- ide-floppy driver 0.99.newide
- usbcore: registered new driver hiddev
- usbcore: registered new driver usbhid
- drivers/usb/input/hid-core.c: v2.6:USB HID core driver
- PNP: No PS/2 controller found. Probing ports directly.
- serio: i8042 KBD port at 0x60,0x64 irq 1
- serio: i8042 AUX port at 0x60,0x64 irq 12
- mice: PS/2 mouse device common for all mice
- md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
- md: bitmap version 4.39
- TCP bic registered
- Initializing IPsec netlink socket
- NET: Registered protocol family 1
- NET: Registered protocol family 17
- ACPI: (supports S0 S4 S5)
- Initalizing network drop monitor service
- Freeing unused kernel memory: 212k freed
- Write protecting the kernel read-only data: 504k
- GSI 18 sharing vector 0xE9 and IRQ 18
- ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 19 (level, low) -> IRQ 233
- PCI: Setting latency timer of device 0000:00:1a.7 to 64
- ehci_hcd 0000:00:1a.7: EHCI Host Controller
- ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
- ehci_hcd 0000:00:1a.7: debug port 1
- PCI: cache line size of 32 is not supported by device 0000:00:1a.7
- ehci_hcd 0000:00:1a.7: irq 233, io mem 0xdf0fe000
- ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
- usb usb1: configuration #1 chosen from 1 choice
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 4 ports detected
- GSI 19 sharing vector 0x32 and IRQ 19
- ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 50
- PCI: Setting latency timer of device 0000:00:1d.7 to 64
- ehci_hcd 0000:00:1d.7: EHCI Host Controller
- ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
- ehci_hcd 0000:00:1d.7: debug port 1
- PCI: cache line size of 32 is not supported by device 0000:00:1d.7
- ehci_hcd 0000:00:1d.7: irq 50, io mem 0xdf0ff000
- ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
- usb usb2: configuration #1 chosen from 1 choice
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 4 ports detected
- ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
- USB Universal Host Controller Interface driver v3.0
- GSI 20 sharing vector 0x3A and IRQ 20
- ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 17 (level, low) -> IRQ 58
- PCI: Setting latency timer of device 0000:00:1a.0 to 64
- uhci_hcd 0000:00:1a.0: UHCI Host Controller
- uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
- uhci_hcd 0000:00:1a.0: irq 58, io base 0x0000ec40
- usb usb3: configuration #1 chosen from 1 choice
- hub 3-0:1.0: USB hub found
- hub 3-0:1.0: 2 ports detected
- usb 1-3: new high speed USB device using ehci_hcd and address 2
- GSI 21 sharing vector 0x42 and IRQ 21
- ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 18 (level, low) -> IRQ 66
- PCI: Setting latency timer of device 0000:00:1a.1 to 64
- uhci_hcd 0000:00:1a.1: UHCI Host Controller
- uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
- uhci_hcd 0000:00:1a.1: irq 66, io base 0x0000ec60
- usb usb4: configuration #1 chosen from 1 choice
- hub 4-0:1.0: USB hub found
- hub 4-0:1.0: 2 ports detected
- usb 1-3: configuration #1 chosen from 1 choice
- hub 1-3:1.0: USB hub found
- hub 1-3:1.0: 3 ports detected
- ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 50
- PCI: Setting latency timer of device 0000:00:1d.0 to 64
- uhci_hcd 0000:00:1d.0: UHCI Host Controller
- uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
- uhci_hcd 0000:00:1d.0: irq 50, io base 0x0000ec80
- usb usb5: configuration #1 chosen from 1 choice
- hub 5-0:1.0: USB hub found
- hub 5-0:1.0: 2 ports detected
- GSI 22 sharing vector 0x4A and IRQ 22
- ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 20 (level, low) -> IRQ 74
- PCI: Setting latency timer of device 0000:00:1d.1 to 64
- uhci_hcd 0000:00:1d.1: UHCI Host Controller
- uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
- uhci_hcd 0000:00:1d.1: irq 74, io base 0x0000eca0
- usb usb6: configuration #1 chosen from 1 choice
- hub 6-0:1.0: USB hub found
- hub 6-0:1.0: 2 ports detected
- SCSI subsystem initialized
- mpt2sas version 01.101.06.00 loaded
- scsi0 : Fusion MPT SAS Host
- ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 177
- PCI: Setting latency timer of device 0000:03:00.0 to 64
- mpt2sas0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (24675928 kB)
- mpt2sas0: PCI-MSI-X enabled: IRQ 82
- mpt2sas0: iomem(0xdf2b0000), mapped(0xffffc20000060000), size(65536)
- mpt2sas0: ioport(0xfc00), size(256)
- mpt2sas0: sending diag reset !!
- mpt2sas0: diag reset: SUCCESS
- mpt2sas0: Allocated physical memory: size(1125 kB)
- mpt2sas0: Current Controller Queue Depth(490), Max Controller Queue Depth(3439)
- mpt2sas0: Scatter Gather Elements per IO(128)
- mpt2sas0: LSISAS2008: FWVersion(02.15.63.00), ChipRevision(0x03), BiosVersion(07.01.09.00)
- mpt2sas0: Dell PERC H200 Integrated: Vendor(0x1000), Device(0x0072), SSVID(0x1028), SSDID(0x1F1E)
- mpt2sas0: Protocol=(Initiator,Target), Capabilities=(Raid,TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ)
- mpt2sas0: sending port enable !!
- mpt2sas0: host_add: handle(0x0001), sas_addr(0x5842b2b077efc900), phys(8)
- mpt2sas0: failure at drivers/scsi/mpt2sas/mpt2sas_scsih.c:4046/_scsih_add_device()!
- mpt2sas0: port enable: SUCCESS
- Vendor: Dell Model: Virtual Disk Rev: 1028
- Type: Direct-Access ANSI SCSI revision: 06
- scsi 0:1:0:0: RAID10: handle(0x004f), wwid(0x08e5a493a7aaa457), pd_count(4), type(SSP)
- scsi 0:1:0:0: qdepth(128), tagged(1), simple(1), ordered(0), scsi_level(7), cmd_que(1)
- SCSI device sda: 570949632 512-byte hdwr sectors (292326 MB)
- sda: Write Protect is off
- sda: Mode Sense: 03 00 00 08
- SCSI device sda: drive cache: write through
- SCSI device sda: 570949632 512-byte hdwr sectors (292326 MB)
- sda: Write Protect is off
- sda: Mode Sense: 03 00 00 08
- SCSI device sda: drive cache: write through
- sda: sda1 sda2
- sd 0:1:0:0: Attached scsi disk sda
- Vendor: SEAGATE Model: ST9146852SS Rev: HT64
- Type: Direct-Access ANSI SCSI revision: 05
- scsi 0:0:0:0: SSP: handle(0x000a), sas_addr(0x5000c5002c8a2855), device_name(0x00c5005054288a2c)
- scsi 0:0:0:0: SSP: enclosure_logical_id(0x5842b2b077efc900), slot(3)
- scsi 0:0:0:0: qdepth(254), tagged(1), simple(1), ordered(0), scsi_level(6), cmd_que(1)
- Vendor: SEAGATE Model: ST9146852SS Rev: HT64
- Type: Direct-Access ANSI SCSI revision: 05
- scsi 0:0:1:0: SSP: handle(0x000b), sas_addr(0x5000c5002c89d089), device_name(0x00c5005088d0892c)
- scsi 0:0:1:0: SSP: enclosure_logical_id(0x5842b2b077efc900), slot(2)
- scsi 0:0:1:0: qdepth(254), tagged(1), simple(1), ordered(0), scsi_level(6), cmd_que(1)
- Vendor: SEAGATE Model: ST9146852SS Rev: HT64
- Type: Direct-Access ANSI SCSI revision: 05
- scsi 0:0:2:0: SSP: handle(0x000c), sas_addr(0x5000c5002c8a299d), device_name(0x00c500509c298a2c)
- scsi 0:0:2:0: SSP: enclosure_logical_id(0x5842b2b077efc900), slot(1)
- scsi 0:0:2:0: qdepth(254), tagged(1), simple(1), ordered(0), scsi_level(6), cmd_que(1)
- Vendor: SEAGATE Model: ST9146852SS Rev: HT64
- Type: Direct-Access ANSI SCSI revision: 05
- scsi 0:0:3:0: SSP: handle(0x000d), sas_addr(0x5000c5002c89ab3d), device_name(0x00c500503cab892c)
- scsi 0:0:3:0: SSP: enclosure_logical_id(0x5842b2b077efc900), slot(0)
- scsi 0:0:3:0: qdepth(254), tagged(1), simple(1), ordered(0), scsi_level(6), cmd_que(1)
- shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- libata version 3.00 loaded.
- ata_piix 0000:00:1f.2: version 2.12
- GSI 23 sharing vector 0x5A and IRQ 23
- ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 23 (level, low) -> IRQ 90
- ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
- PCI: Setting latency timer of device 0000:00:1f.2 to 64
- scsi1 : ata_piix
- scsi2 : ata_piix
- ata1: SATA max UDMA/133 cmd 0xec10 ctl 0xec08 bmdma 0xec20 irq 90
- ata2: SATA max UDMA/133 cmd 0xec18 ctl 0xec0c bmdma 0xec28 irq 90
- ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- ata1.00: ATAPI: TEAC DVD-ROM DV-28SW, R.2A, max UDMA/100
- ata1.00: configured for UDMA/100
- ata2: SATA link down (SStatus 4 SControl 0)
- Vendor: TEAC Model: DVD-ROM DV-28SW Rev: R.2A
- Type: CD-ROM ANSI SCSI revision: 05
- device-mapper: uevent: version 1.0.3
- device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
- device-mapper: dm-raid45: initialized v0.2594l
- EXT3-fs: INFO: recovery required on readonly filesystem.
- EXT3-fs: write access will be enabled during recovery.
- kjournald starting. Commit interval 5 seconds
- EXT3-fs: dm-0: orphan cleanup on readonly fs
- ext3_orphan_cleanup: deleting unreferenced inode 24477994
- EXT3-fs: dm-0: 1 orphan inode deleted
- EXT3-fs: recovery complete.
- EXT3-fs: mounted filesystem with ordered data mode.
- SELinux: Disabled at runtime.
- SELinux: Unregistering netfilter hooks
- type=1404 audit(1390777316.437:2): selinux=0 auid=4294967295 ses=4294967295
- Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.2.3n (Mar 11, 2013)
- GSI 24 sharing vector 0x62 and IRQ 24
- ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 36 (level, low) -> IRQ 98
- PCI: Setting latency timer of device 0000:01:00.0 to 64
- bnx2 0000:01:00.0: eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d6000000, IRQ 98, node addr 84:2b:2b:fa:b8:54
- GSI 25 sharing vector 0x6A and IRQ 25
- ACPI: PCI Interrupt 0000:01:00.1[B] -> GSI 48 (level, low) -> IRQ 106
- PCI: Setting latency timer of device 0000:01:00.1 to 64
- bnx2 0000:01:00.1: eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d8000000, IRQ 106, node addr 84:2b:2b:fa:b8:56
- GSI 26 sharing vector 0x72 and IRQ 26
- ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 32 (level, low) -> IRQ 114
- PCI: Setting latency timer of device 0000:02:00.0 to 64
- bnx2 0000:02:00.0: eth2: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem da000000, IRQ 114, node addr 84:2b:2b:fa:b8:58
- GSI 27 sharing vector 0x7A and IRQ 27
- ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 42 (level, low) -> IRQ 122
- PCI: Setting latency timer of device 0000:02:00.1 to 64
- bnx2 0000:02:00.1: eth3: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 122, node addr 84:2b:2b:fa:b8:5a
- input: PC Speaker as /class/input/input0
- sd 0:1:0:0: Attached scsi generic sg0 type 0
- scsi 0:0:0:0: Attached scsi generic sg1 type 0
- scsi 0:0:1:0: Attached scsi generic sg2 type 0
- scsi 0:0:2:0: Attached scsi generic sg3 type 0
- scsi 0:0:3:0: Attached scsi generic sg4 type 0
- scsi 1:0:0:0: Attached scsi generic sg5 type 5
- sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
- Uniform CD-ROM driver Revision: 3.20
- sr 1:0:0:0: Attached scsi CD-ROM sr0
- floppy0: no floppy controllers found
- lp: driver loaded but no devices found
- ACPI: Power Button (FF) [PWRF]
- ACPI: Mapper loaded
- dell-wmi: No known WMI GUID found
- ACPI Exception (evregion-0424): AE_SUPPORT, Returned by Handler for [DataTable] [20060707]
- ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._GHL] (Node ffff81033005d8b0), AE_SUPPORT
- ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMC] (Node ffff81033005d8f0), AE_SUPPORT
- ACPI Exception (power_meter-0759): AE_SUPPORT, Evaluating _PMC [20060707]
- Device 'power_meter0' does not have a release() function, it is broken and must be fixed.
- BUG: warning at drivers/base/core.c:101/device_release() (Tainted: G )
- Call Trace:
- [<ffffffff801519ef>] kobject_cleanup+0x53/0x7e
- [<ffffffff80151a1a>] kobject_release+0x0/0x9
- [<ffffffff80035748>] kref_put+0x6f/0x7a
- [<ffffffff882fb0ed>] :power_meter:acpi_power_meter_add+0x158/0x16f
- [<ffffffff801a115e>] acpi_bus_driver_init+0x30/0x57
- [<ffffffff801a237c>] acpi_bus_register_driver+0x95/0xd4
- [<ffffffff88271032>] :power_meter:acpi_power_meter_init+0x25/0x34
- [<ffffffff800a7fe0>] sys_init_module+0xaf/0x1f2
- [<ffffffff8005e116>] system_call+0x7e/0x83
- md: Autodetecting RAID arrays.
- md: autorun ...
- md: ... autorun DONE.
- device-mapper: multipath: version 1.0.5 loaded
- loop: loaded (max 8 devices)
- EXT3 FS on dm-0, internal journal
- kjournald starting. Commit interval 5 seconds
- EXT3 FS on dm-1, internal journal
- EXT3-fs: mounted filesystem with ordered data mode.
- kjournald starting. Commit interval 5 seconds
- EXT3 FS on sda1, internal journal
- EXT3-fs: mounted filesystem with ordered data mode.
- Adding 49151992k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:49151992k
- IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
- bnx2 0000:01:00.0: eth0: using MSI
- bnx2 0000:01:00.0: eth0: NIC Copper Link is Up, 1000 Mbps full duplex
- Bluetooth: Core ver 2.10
- NET: Registered protocol family 31
- Bluetooth: HCI device and connection manager initialized
- Bluetooth: HCI socket layer initialized
- Bluetooth: L2CAP ver 2.8
- Bluetooth: L2CAP socket layer initialized
- Bluetooth: RFCOMM socket layer initialized
- Bluetooth: RFCOMM TTY layer initialized
- Bluetooth: RFCOMM ver 1.8
- Bluetooth: HIDP (Human Interface Emulation) ver 1.1
- NET: Registered protocol family 10
- lo: Disabled Privacy Extensions
- IPv6 over IPv4 tunneling driver
- Netfilter messages via NETLINK v0.30.
- ip_conntrack version 2.4 (8192 buckets, 65536 max) - 304 bytes per conntrack
- ip_tables: (C) 2000-2006 Netfilter Core Team
- eth0: no IPv6 routers present
复制代码
that's all
回复 4# humjb_1983
|
|