solaris11配置IP

dawnprince

這個問題我目前也有遇到,但是目前還無法解決!
網卡無法辨認，ping 其他電腦無法知道是什麼...

baixianglu

1.从自动网络配置模式转换为手动配置模式
验证NCP

netadm list  

netadm enable -p ncp DefaultFixed

2.确认DefaultFixed模式可用
netadm list  
netadm: DefaultFixed NCP is enabled;  
automatic network management is not available.  
netadm list' is only supported when automatic network management is active.  
3.确认要配置的接口

# dladm show-phys


4.配置net0

# ipadm create-ip net0
# ipadm create-addr -T static -a 192.168.56.200/24 net0/v4
# ipadm show-addr

5.配置网关


# route -p add default 12.34.56.1  
6.配置DNS

root@solaris:~# svccfg -s dns/client
svc:/network/dns/client> setprop config/nameserver = (8.8.8.8 8.8.4.4)
svc:/network/dns/client> listprop config
config application
config/value_authorization astring solaris.smf.value.name-service.dns.client
config/nameserver net_address 8.8.8.8 8.8.4.4
svc:/network/dns/client> exit
root@solaris:~#
root@solaris:~# svcadm refresh dns/client
root@solaris:~# svcadm restart dns/client
[  
7.配置name-server

root@solaris:~# svccfg -s name-service/switch
svc:/system/name-service/switch> setprop config/host ="files dns"
svc:/system/name-service/switch> listprop config
config application
config/default astring files
config/value_authorization astring solaris.smf.value.name-service.switch
config/printer astring "user files"
config/host astring "files dns"
svc:/system/name-service/switch> exit

yates15

我是这么用的... 可以访问
ipadm create-ip net0
ipadm create-addr -T static -a 172.25.15.96/24 net0/v4
route -p add default 172.25.15.1
是网关是这个 ?
default              10.3.10.254          UG        2          2