- 论坛徽章:
- 0
|
5可用积分
本帖最后由 anlan_cs 于 2014-02-24 14:49 编辑
# fdisk -l 查看是ok的
Disk /dev/sda: 8195 MB, 8195604480 bytes
119 heads, 4 sectors/track, 33628 cylinders
Units = cylinders of 476 * 512 = 243712 bytes
Device Boot Start End Blocks Id System
/dev/sda1 5 33629 8002496 83 Linux
Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk /dev/sdb doesn't contain a valid partition table
# fdisk /dev/sdb 执行fdisk就出问题了。。。
Device contains [ 25.890003] fdisk[101]: segfault at 808604c ip 000000000807f9c4 sp 00000000ffdd2cf4 error 7neither a valid in busybox[8048a
ble, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that the previous content
won't be recoverable.
The number of cylinders for this disk is set to 60801.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Segmentation fault
咋fdisk 还能segment?
|
最佳答案
查看完整内容
自己编译一个fdisk,不使用busybox的试试ftp://ftp.gnu.org/gnu/fdisk
|