- 论坛徽章:
- 2
|
- Sun Fire(TM) T1000, No Keyboard
- Copyright 2006 Sun Microsystems, Inc. All rights reserved.
- OpenBoot 4.25.0, 8184 MB memory available, Serial #69339108.
- Ethernet address 0:14:4f:22:7:e4, Host ID: 842207e4.
- Rebooting with command: boot /pci@7c0/pci@0/pci@8/scsi@2/disk@0,0
- Boot device: /pci@7c0/pci@0/pci@8/scsi@2/disk@0,0 File and args:
- Bad magic number in disk label
- Can't open disk label package
- Evaluating:
- Can't open boot device
- {0} ok boot /pci@7c0/pci@0/pci@8/scsi@2/disk@1,0
- Boot device: /pci@7c0/pci@0/pci@8/scsi@2/disk@1,0 File and args:
- OpenBSD IEEE 1275 Bootblock 1.3
- ..>> OpenBSD BOOT 1.6
- Trying bsd...
- open /pci@7c0/pci@0/pci@8/scsi@2/disk@1,0:a/etc/random.seed: No such file or directory
- Booting /pci@7c0/pci@0/pci@8/scsi@2/disk@1,0:a/bsd
- 3901336@0x1000000+6248@0x13b8798+3261984@0x1800000+932320@0x1b1c620
- symbols @ 0xfefd6300 119 start=0x1000000
- console is /virtual-devices@100/console@1
- Copyright (c) 1982, 1986, 1989, 1991, 1993
- The Regents of the University of California. All rights reserved.
- Copyright (c) 1995-2014 OpenBSD. All rights reserved. http://www.OpenBSD.org
- OpenBSD 5.5 (RAMDISK) #153: Tue Mar 4 15:12:10 MST 2014
- deraadt@sparc64.openbsd.org:/usr/src/sys/arch/sparc64/compile/RAMDISK
- real mem = 8581545984 (8184MB)
- avail mem = 8436031488 (8045MB)
- mainbus0 at root: Sun Fire(TM) T1000
- cpu0 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz
- "SUNW,UltraSPARC-T1" at mainbus0 not configured
- "SUNW,UltraSPARC-T1" at mainbus0 not configured
- "SUNW,UltraSPARC-T1" at mainbus0 not configured
- "SUNW,UltraSPARC-T1" at mainbus0 not configured
- "SUNW,UltraSPARC-T1" at mainbus0 not configured
- "SUNW,UltraSPARC-T1" at mainbus0 not configured
- "SUNW,UltraSPARC-T1" at mainbus0 not configured
- "SUNW,UltraSPARC-T1" at mainbus0 not configured
- "SUNW,UltraSPARC-T1" at mainbus0 not configured
- "SUNW,UltraSPARC-T1" at mainbus0 not configured
- "SUNW,UltraSPARC-T1" at mainbus0 not configured
- "SUNW,UltraSPARC-T1" at mainbus0 not configured
- "SUNW,UltraSPARC-T1" at mainbus0 not configured
- "SUNW,UltraSPARC-T1" at mainbus0 not configured
- "SUNW,UltraSPARC-T1" at mainbus0 not configured
- "SUNW,UltraSPARC-T1" at mainbus0 not configured
- "SUNW,UltraSPARC-T1" at mainbus0 not configured
- "SUNW,UltraSPARC-T1" at mainbus0 not configured
- "SUNW,UltraSPARC-T1" at mainbus0 not configured
- "SUNW,UltraSPARC-T1" at mainbus0 not configured
- "SUNW,UltraSPARC-T1" at mainbus0 not configured
- "SUNW,UltraSPARC-T1" at mainbus0 not configured
- "SUNW,UltraSPARC-T1" at mainbus0 not configured
- vbus0 at mainbus0
- "nvram" at vbus0 not configured
- vcons0 at vbus0: ivec 0x111, console
- "ncp" at vbus0 not configured
- vrtc0 at vbus0
- "loop" at vbus0 not configured
- "loop" at vbus0 not configured
- "echo" at vbus0 not configured
- "fma" at vbus0 not configured
- "sunvts" at vbus0 not configured
- "sunmc" at vbus0 not configured
- "explorer" at vbus0 not configured
- "led" at vbus0 not configured
- "flashupdate" at vbus0 not configured
- "flashprom" at vbus0 not configured
- vpci0 at mainbus0: bus 2 to 2, dvma map 80000000-ffffffff
- pci0 at vpci0
- vpci1 at mainbus0: bus 2 to 4, dvma map 80000000-ffffffff
- pci1 at vpci1
- ppb0 at pci1 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb3
- pci2 at ppb0 bus 3
- bge0 at pci2 dev 4 function 0 "Broadcom BCM5714" rev 0xa2, BCM5715 A1 (0x9001): ivec 0x7d4, address 00:14:4f:22:07:e4
- brgphy0 at bge0 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
- bge1 at pci2 dev 4 function 1 "Broadcom BCM5714" rev 0xa2, BCM5715 A1 (0x9001): ivec 0x7d5, address 00:14:4f:22:07:e5
- brgphy1 at bge1 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
- ppb1 at pci2 dev 8 function 0 "ServerWorks HT-1000 PCIX" rev 0xb3
- pci3 at ppb1 bus 4
- bge2 at pci3 dev 1 function 0 "Broadcom BCM5704C" rev 0x10, BCM5704 B0 (0x2100): ivec 0x7c2, address 00:14:4f:22:07:e6
- brgphy2 at bge2 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
- bge3 at pci3 dev 1 function 1 "Broadcom BCM5704C" rev 0x10, BCM5704 B0 (0x2100): ivec 0x7c1, address 00:14:4f:22:07:e7
- brgphy3 at bge3 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
- mpi0 at pci3 dev 2 function 0 "Symbios Logic SAS1064" rev 0x02: msi
复制代码 这个是我用miniroot启动的界面,只能帮你到这里了.. |
|