免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
12下一页
最近访问板块 发新帖
查看: 7576 | 回复: 13
打印 上一主题 下一主题

[系统管理] [已解决]ReHat 5.5系统,只识别了一个CPU一个核 [复制链接]

论坛徽章:
0
跳转到指定楼层
1 [收藏(0)] [报告]
发表于 2014-03-13 22:05 |只看该作者 |倒序浏览
本帖最后由 weizhl08 于 2014-03-17 13:51 编辑

我的是Dell T7500的工作站,有两个物理CPU,每个CPU是6个核,但我用
cat /proc/cpuinfo只有一个CPU的一个核,其余11个核不见啦

麻烦大家看谁知道怎么回事

这是cpuinfo



用Dell的工具检测是有 2个CPU 共12个核

现在我感觉是配置的问题,不知道哪个地方限制啦,麻烦哪位高手知道怎么回事,多谢大家啦


论坛徽章:
33
荣誉会员
日期:2011-11-23 16:44:17天秤座
日期:2014-08-26 16:18:20天秤座
日期:2014-08-29 10:12:18丑牛
日期:2014-08-29 16:06:45丑牛
日期:2014-09-03 10:28:58射手座
日期:2014-09-03 16:01:17寅虎
日期:2014-09-11 14:24:21天蝎座
日期:2014-09-17 08:33:55IT运维版块每日发帖之星
日期:2016-04-17 06:23:27操作系统版块每日发帖之星
日期:2016-04-18 06:20:00IT运维版块每日发帖之星
日期:2016-04-24 06:20:0015-16赛季CBA联赛之天津
日期:2016-05-06 12:46:59
2 [报告]
发表于 2014-03-14 07:55 |只看该作者
uname -a 的结果发上来看看

论坛徽章:
0
3 [报告]
发表于 2014-03-14 08:51 |只看该作者
下面是uname -a的结果

麻烦看一下,多谢啦

[root@my_host proc] #uname -a
Linux my_host  2.6.18-194.el5 #1 SMP Tue Mar 16 21:52:39 EDT 2010x86_64 x86_64
x86_64  GNU/Linux

论坛徽章:
33
荣誉会员
日期:2011-11-23 16:44:17天秤座
日期:2014-08-26 16:18:20天秤座
日期:2014-08-29 10:12:18丑牛
日期:2014-08-29 16:06:45丑牛
日期:2014-09-03 10:28:58射手座
日期:2014-09-03 16:01:17寅虎
日期:2014-09-11 14:24:21天蝎座
日期:2014-09-17 08:33:55IT运维版块每日发帖之星
日期:2016-04-17 06:23:27操作系统版块每日发帖之星
日期:2016-04-18 06:20:00IT运维版块每日发帖之星
日期:2016-04-24 06:20:0015-16赛季CBA联赛之天津
日期:2016-05-06 12:46:59
4 [报告]
发表于 2014-03-14 09:23 |只看该作者
回复 3# weizhl08


    是 smp 的kernel 呀. 而且, rhel5以后,都是smp的kernel了呀.

看一下 /var/log/dmesg 里有啥可用的信息

论坛徽章:
154
2022北京冬奥会纪念版徽章
日期:2015-08-07 17:10:5720周年集字徽章-年
日期:2022-10-26 16:44:2015-16赛季CBA联赛之深圳
日期:2022-11-02 14:02:4515-16赛季CBA联赛之八一
日期:2022-11-28 12:07:4820周年集字徽章-20	
日期:2023-07-19 08:49:4515-16赛季CBA联赛之八一
日期:2023-11-04 19:23:5115-16赛季CBA联赛之广夏
日期:2023-12-13 18:09:34
5 [报告]
发表于 2014-03-14 10:14 |只看该作者
centos64也出现过【一次】这个诡异的问题


解决办法,重启系统。。。

论坛徽章:
0
6 [报告]
发表于 2014-03-17 08:24 |只看该作者
本帖最后由 weizhl08 于 2014-03-17 08:50 编辑

/var/log/dmesg信息如下:

Linux version 2.6.18-194.el5 (mockbuild@x86-005.build.bos.redhat.com) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-4) #1 SMP Tue Mar 16 21:52:39 EDT 2010
Command line: ro root=/dev/VolGroup00/LogVol00 acpi=off rhgb quiet
BIOS-provided physical RAM map:
BIOS-e820: 0000000000010000 - 000000000009d400 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000d7df9c00 (usable)
BIOS-e820: 00000000d7df9c00 - 00000000d7e4bc00 (ACPI NVS)
BIOS-e820: 00000000d7e4bc00 - 00000000d7e4dc00 (ACPI data)
BIOS-e820: 00000000d7e4dc00 - 00000000d8000000 (reserved)
BIOS-e820: 00000000f8000000 - 00000000fd000000 (reserved)
BIOS-e820: 00000000fe000000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000001828000000 (usable)
DMI 2.5 present.
No NUMA configuration found
Faking a node at 0000000000000000-0000001828000000
Bootmem setup node 0 0000000000000000-0000001828000000
No mptable found.
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
disabling kdump
On node 0 totalpages: 24817492
  DMA zone: 2531 pages, LIFO batch:0
  DMA32 zone: 865841 pages, LIFO batch:31
  Normal zone: 23949120 pages, LIFO batch:31
Nosave address range: 000000000009d000 - 00000000000f0000
Nosave address range: 00000000000f0000 - 0000000000100000
Nosave address range: 00000000d7df9000 - 00000000d7dfa000
Nosave address range: 00000000d7dfa000 - 00000000d7e4b000
Nosave address range: 00000000d7e4b000 - 00000000d7e4c000
Nosave address range: 00000000d7e4c000 - 00000000d7e4d000
Nosave address range: 00000000d7e4d000 - 00000000d7e4e000
Nosave address range: 00000000d7e4e000 - 00000000d8000000
Nosave address range: 00000000d8000000 - 00000000f8000000
Nosave address range: 00000000f8000000 - 00000000fd000000
Nosave address range: 00000000fd000000 - 00000000fe000000
Nosave address range: 00000000fe000000 - 00000000fed00000
Nosave address range: 00000000fed00000 - 00000000fee00000
Nosave address range: 00000000fee00000 - 00000000fef00000
Nosave address range: 00000000fef00000 - 00000000ffb00000
Nosave address range: 00000000ffb00000 - 0000000100000000
Allocating PCI resources starting at da000000 (gap: d8000000:20000000)
SMP: Allowing 0 CPUs, 0 hotplug CPUs
Built 1 zonelists.  Total pages: 24817492
Kernel command line: ro root=/dev/VolGroup00/LogVol00 acpi=off rhgb quiet
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 16777216 (order: 15, 134217728 bytes)
Inode-cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Checking aperture...
ACPI: DMAR not present
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0xd024000 - 0x11024000
Memory: 99003516k/101318656k available (2577k kernel code, 1657244k reserved, 1305k data, 212k init)
Calibrating delay loop (skipped), value calculated using timer frequency.. 6916.19 BogoMIPS (lpj=3458097)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
using mwait in idle threads.
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM1)
SMP alternatives: switching to UP code
Freeing SMP alternatives: 32k freed
weird, boot CPU (#32) not listed by the BIOS.
SMP motherboard not detected.
Using local APIC timer interrupts.
Detected 8.312 MHz APIC timer.
testing NMI watchdog ... OK.
SMP disabled
Brought up 1 CPUs
testing NMI watchdog ... OK.
time.c: Using 1.193182 MHz WALL PIT GTOD PIT/TSC timer.
time.c: Detected 3458.097 MHz processor.
sizeof(vma)=176 bytes
sizeof(page)=56 bytes
sizeof(inode)=560 bytes
sizeof(dentry)=216 bytes
sizeof(ext3inode)=760 bytes
sizeof(buffer_head)=96 bytes
sizeof(skbuff)=248 bytes
checking if image is initramfs... it is
Freeing initrd memory: 3432k freed
NET: Registered protocol family 16
PCI: Using configuration type 1
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
ACPI Error (tbget-016: Invalid address flags 8 [20060707]
ACPI Error (tbget-016: Invalid address flags 8 [20060707]
ACPI Error (tbget-016: Invalid address flags 8 [20060707]
ACPI Error (tbget-016: Invalid address flags 8 [20060707]
ACPI Error (tbget-016: Invalid address flags 8 [20060707]
ACPI Error (tbget-016: Invalid address flags 8 [20060707]
ACPI Error (tbget-016: Invalid address flags 8 [20060707]
ACPI Error (tbget-016: Invalid address flags 8 [20060707]
ACPI Error (tbget-016: Invalid address flags 8 [20060707]
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
PCI: Transparent bridge - 0000:00:1e.0
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
ACPI Error (tbget-0168): Invalid address flags 8 [20060707]
PCI: Discovered primary peer bus 20 [IRQ]
PCI: Using IRQ router PIIX/ICH [8086/3a16] at 0000:00:1f.0
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
ACPI: DMAR not present
PCI-GART: No AMD northbridge found.
PCI: Bridge: 0000:01:00.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:01.0
  IO window: disabled.
  MEM window: f7b00000-f7bfffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:03.0
  IO window: d000-dfff
  MEM window: f7d00000-f7efffff
  PREFETCH window 0x00000000e0000000-0x00000000efffffff
PCI: Bridge: 0000:00:07.0
  IO window: disabled.
  MEM window: f7c00000-f7cfffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.0
  IO window: c000-cfff
  MEM window: f7900000-f7afffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.5
  IO window: disabled.
  MEM window: f7800000-f78fffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
  IO window: disabled.
  MEM window: f7700000-f77fffff
  PREFETCH window: disabled.
PCI: setting IRQ 11 as level-triggered
PCI: Found IRQ 11 for device 0000:00:01.0
PCI: Sharing IRQ 11 with 0000:00:00.0
PCI: Sharing IRQ 11 with 0000:00:03.0
PCI: Sharing IRQ 11 with 0000:00:07.0
PCI: Sharing IRQ 11 with 0000:00:1a.0
PCI: Sharing IRQ 11 with 0000:00:1b.0
PCI: Sharing IRQ 11 with 0000:00:1c.0
PCI: Sharing IRQ 11 with 0000:03:00.0
PCI: Sharing IRQ 11 with 0000:05:00.0
PCI: Sharing IRQ 11 with 0000:20:03.0
PCI: Sharing IRQ 11 with 0000:20:07.0
PCI: Sharing IRQ 11 with 0000:20:09.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:01:00.0 to 64
PCI: Found IRQ 11 for device 0000:00:03.0
PCI: Sharing IRQ 11 with 0000:00:00.0
PCI: Sharing IRQ 11 with 0000:00:01.0
PCI: Sharing IRQ 11 with 0000:00:07.0
PCI: Sharing IRQ 11 with 0000:00:1a.0
PCI: Sharing IRQ 11 with 0000:00:1b.0
PCI: Sharing IRQ 11 with 0000:00:1c.0
PCI: Sharing IRQ 11 with 0000:03:00.0
PCI: Sharing IRQ 11 with 0000:05:00.0
PCI: Sharing IRQ 11 with 0000:20:03.0
PCI: Sharing IRQ 11 with 0000:20:07.0
PCI: Sharing IRQ 11 with 0000:20:09.0
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Found IRQ 11 for device 0000:00:07.0
PCI: Sharing IRQ 11 with 0000:00:00.0
PCI: Sharing IRQ 11 with 0000:00:01.0
PCI: Sharing IRQ 11 with 0000:00:03.0
PCI: Sharing IRQ 11 with 0000:00:1a.0
PCI: Sharing IRQ 11 with 0000:00:1b.0
PCI: Sharing IRQ 11 with 0000:00:1c.0
PCI: Sharing IRQ 11 with 0000:03:00.0
PCI: Sharing IRQ 11 with 0000:05:00.0
PCI: Sharing IRQ 11 with 0000:20:03.0
PCI: Sharing IRQ 11 with 0000:20:07.0
PCI: Sharing IRQ 11 with 0000:20:09.0
PCI: Setting latency timer of device 0000:00:07.0 to 64
PCI: Found IRQ 11 for device 0000:00:1c.0
PCI: Sharing IRQ 11 with 0000:00:00.0
PCI: Sharing IRQ 11 with 0000:00:01.0
PCI: Sharing IRQ 11 with 0000:00:03.0
PCI: Sharing IRQ 11 with 0000:00:07.0
PCI: Sharing IRQ 11 with 0000:00:1a.0
PCI: Sharing IRQ 11 with 0000:00:1b.0
PCI: Sharing IRQ 11 with 0000:03:00.0
PCI: Sharing IRQ 11 with 0000:05:00.0
PCI: Sharing IRQ 11 with 0000:20:03.0
PCI: Sharing IRQ 11 with 0000:20:07.0
PCI: Sharing IRQ 11 with 0000:20:09.0
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: setting IRQ 10 as level-triggered
PCI: Found IRQ 10 for device 0000:00:1c.5
PCI: Sharing IRQ 10 with 0000:00:1a.1
PCI: Sharing IRQ 10 with 0000:00:1d.1
PCI: Sharing IRQ 10 with 0000:06:00.0
PCI: Setting latency timer of device 0000:00:1c.5 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
PCI: Bridge: 0000:20:03.0
  IO window: disabled.
  MEM window: dff00000-dfffffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:20:07.0
  IO window: disabled.
  MEM window: dfe00000-dfefffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:20:09.0
  IO window: disabled.
  MEM window: dfd00000-dfdfffff
  PREFETCH window: disabled.
PCI: Found IRQ 11 for device 0000:20:03.0
PCI: Sharing IRQ 11 with 0000:00:00.0
PCI: Sharing IRQ 11 with 0000:00:01.0
PCI: Sharing IRQ 11 with 0000:00:03.0
PCI: Sharing IRQ 11 with 0000:00:07.0
PCI: Sharing IRQ 11 with 0000:00:1a.0
PCI: Sharing IRQ 11 with 0000:00:1b.0
PCI: Sharing IRQ 11 with 0000:00:1c.0
PCI: Sharing IRQ 11 with 0000:03:00.0
PCI: Sharing IRQ 11 with 0000:05:00.0
PCI: Sharing IRQ 11 with 0000:20:07.0
PCI: Sharing IRQ 11 with 0000:20:09.0
PCI: Setting latency timer of device 0000:20:03.0 to 64
PCI: Found IRQ 11 for device 0000:20:07.0
PCI: Sharing IRQ 11 with 0000:00:00.0
PCI: Sharing IRQ 11 with 0000:00:01.0
PCI: Sharing IRQ 11 with 0000:00:03.0
PCI: Sharing IRQ 11 with 0000:00:07.0
PCI: Sharing IRQ 11 with 0000:00:1a.0
PCI: Sharing IRQ 11 with 0000:00:1b.0
PCI: Sharing IRQ 11 with 0000:00:1c.0
PCI: Sharing IRQ 11 with 0000:03:00.0
PCI: Sharing IRQ 11 with 0000:05:00.0
PCI: Sharing IRQ 11 with 0000:20:03.0
PCI: Sharing IRQ 11 with 0000:20:09.0
PCI: Setting latency timer of device 0000:20:07.0 to 64
PCI: Found IRQ 11 for device 0000:20:09.0
PCI: Sharing IRQ 11 with 0000:00:00.0
PCI: Sharing IRQ 11 with 0000:00:01.0
PCI: Sharing IRQ 11 with 0000:00:03.0
PCI: Sharing IRQ 11 with 0000:00:07.0
PCI: Sharing IRQ 11 with 0000:00:1a.0
PCI: Sharing IRQ 11 with 0000:00:1b.0
PCI: Sharing IRQ 11 with 0000:00:1c.0
PCI: Sharing IRQ 11 with 0000:03:00.0
PCI: Sharing IRQ 11 with 0000:05:00.0
PCI: Sharing IRQ 11 with 0000:20:03.0
PCI: Sharing IRQ 11 with 0000:20:07.0
PCI: Setting latency timer of device 0000:20:09.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
type=2000 audit(1394611604.660:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
alg: No test for crc32c (crc32c-generic)
ksign: Installing public key data
Loading keyring
- Added public key 78CCFEAA9428026A
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:03:00.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:00:07.0 to 64
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:00:1c.5 to 64
PCI: Setting latency timer of device 0000:20:03.0 to 64
PCI: Setting latency timer of device 0000:20:07.0 to 64
PCI: Setting latency timer of device 0000:20:09.0 to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
Probing IDE interface ide1...
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Initalizing network drop monitor service
Freeing unused kernel memory: 212k freed
Write protecting the kernel read-only data: 504k
PCI: setting IRQ 9 as level-triggered
PCI: Found IRQ 9 for device 0000:00:1a.7
PCI: Sharing IRQ 9 with 0000:00:1a.2
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 9, io mem 0xf7ffa000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
PCI: setting IRQ 5 as level-triggered
PCI: Found IRQ 5 for device 0000:00:1d.7
PCI: Sharing IRQ 5 with 0000:00:1d.0
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 5, io mem 0xff980000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
PCI: Found IRQ 11 for device 0000:00:1a.0
PCI: Sharing IRQ 11 with 0000:00:00.0
PCI: Sharing IRQ 11 with 0000:00:1b.0
PCI: Sharing IRQ 11 with 0000:03:00.0
PCI: Sharing IRQ 11 with 0000:05:00.0
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 11, io base 0x00001f20
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PCI: Found IRQ 10 for device 0000:00:1a.1
PCI: Sharing IRQ 10 with 0000:00:1d.1
PCI: Sharing IRQ 10 with 0000:06:00.0
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 10, io base 0x00001f00
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
PCI: Found IRQ 9 for device 0000:00:1a.2
PCI: Sharing IRQ 9 with 0000:00:1a.7
PCI: Setting latency timer of device 0000:00:1a.2 to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 9, io base 0x00001c00
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
PCI: Found IRQ 5 for device 0000:00:1d.0
PCI: Sharing IRQ 5 with 0000:00:1d.7
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 5, io base 0x00001f80
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
PCI: Found IRQ 10 for device 0000:00:1d.1
PCI: Sharing IRQ 10 with 0000:00:1a.1
PCI: Sharing IRQ 10 with 0000:06:00.0
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 10, io base 0x00001f60
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
PCI: setting IRQ 3 as level-triggered
PCI: Found IRQ 3 for device 0000:00:1d.2
PCI: Sharing IRQ 3 with 0000:07:0a.0
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 3, io base 0x00001f40
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
SCSI subsystem initialized
Fusion MPT base driver 3.04.13rh
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SAS Host driver 3.04.13rh
PCI: Found IRQ 11 for device 0000:05:00.0
PCI: Sharing IRQ 11 with 0000:00:00.0
PCI: Sharing IRQ 11 with 0000:00:1a.0
PCI: Sharing IRQ 11 with 0000:00:1b.0
PCI: Sharing IRQ 11 with 0000:03:00.0
mptbase: ioc0: Initiating bringup
usb 7-2: new low speed USB device using uhci_hcd and address 2
usb 7-2: configuration #1 chosen from 1 choice
input: USB Optical Mouse as /class/input/input0
input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.1-2
ioc0: LSISAS1068E B3: Capabilities={Initiator}
PCI: Setting latency timer of device 0000:05:00.0 to 64
usb 8-2: new low speed USB device using uhci_hcd and address 2
usb 8-2: configuration #1 chosen from 1 choice
input: Logitech USB Keyboard as /class/input/input1
input: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1d.2-2
input: Logitech USB Keyboard as /class/input/input2
input: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1d.2-2
scsi0 : ioc0: LSISAS1068E B3, FwRev=00192f00h, Ports=1, MaxQ=266, IRQ=11
mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x5000c5003b51020d
  Vendor: SEAGATE   Model: ST3600057SS       Rev: ES64
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sda: 1172123568 512-byte hdwr sectors (600127 MB)
sda: Write Protect is off
sda: Mode Sense: bb 00 10 08
SCSI device sda: drive cache: write back w/ FUA
SCSI device sda: 1172123568 512-byte hdwr sectors (600127 MB)
sda: Write Protect is off
sda: Mode Sense: bb 00 10 08
SCSI device sda: drive cache: write back w/ FUA
sda: sda1 sda2 sda3 sda4 < sda5 >
sd 0:0:0:0: Attached scsi disk sda
mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 1, phy 1, sas_addr 0x5000cca01898b8fd
  Vendor: HITACHI   Model: HUS156060VLS600   Rev: E516
  Type:   Direct-Access                      ANSI SCSI revision: 06
SCSI device sdb: 1172123568 512-byte hdwr sectors (600127 MB)
sdb: Write Protect is off
sdb: Mode Sense: db 00 10 08
SCSI device sdb: drive cache: write back w/ FUA
SCSI device sdb: 1172123568 512-byte hdwr sectors (600127 MB)
sdb: Write Protect is off
sdb: Mode Sense: db 00 10 08
SCSI device sdb: drive cache: write back w/ FUA
sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 >
sd 0:0:1:0: Attached scsi disk sdb
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
PCI: Found IRQ 3 for device 0000:00:1f.2
PCI: Sharing IRQ 3 with 0000:00:1f.3
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x27 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio ems
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
ata1: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970100 irq 129
ata2: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970180 irq 129
ata3: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970200 irq 129
ata4: DUMMY
ata5: DUMMY
ata6: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970380 irq 129
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATAPI: TSSTcorpDVD-ROM TS-H353C, D100, max UDMA/100, ATAPI AN
ata1.00: configured for UDMA/100
ata2: SATA link down (SStatus 4 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
  Vendor: TSSTcorp  Model: DVD-ROM TS-H353C  Rev: D100
  Type:   CD-ROM                             ANSI SCSI revision: 05
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
device-mapper: dm-raid45: initialized v0.2594l
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
type=1404 audit(1394611661.273:2): selinux=0 auid=4294967295 ses=4294967295
Floppy drive(s): fd0 is 1.44M
input: PC Speaker as /class/input/input3
windrvr6: no version for "struct_module" found: kernel tainted.
windrvr6: module license 'Proprietary' taints kernel.
Symbol usb_register_driver is being used by a non-GPL module, which will not be allowed in the future
Please see the file Documentation/feature-removal-schedule.txt in the kernel source tree for more details.
Symbol usb_deregister is being used by a non-GPL module, which will not be allowed in the future
Please see the file Documentation/feature-removal-schedule.txt in the kernel source tree for more details.
WinDriver v9.20 Jungo (c) 1997 - 2008 Build Date: Feb 19 2008 x86_64 64bit loaded
registering 32bit compatibility ioctls
[fglrx] Maximum main memory to use for locked dma buffers: 94894 MBytes.
[fglrx]   vendor: 1002 device: 95cf count: 1
[fglrx] ioport: bar 4, base 0xdc00, size: 0x100
PCI: Found IRQ 11 for device 0000:03:00.0
PCI: Sharing IRQ 11 with 0000:00:00.0
PCI: Sharing IRQ 11 with 0000:00:1a.0
PCI: Sharing IRQ 11 with 0000:00:1b.0
PCI: Sharing IRQ 11 with 0000:05:00.0
PCI: Setting latency timer of device 0000:03:00.0 to 64
[fglrx] Driver built-in PAT support is enabled successfully
[fglrx] module loaded - fglrx 8.72.5 [Apr  6 2010] with 1 minors
PCI: Found IRQ 3 for device 0000:00:1f.3
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:1:0: Attached scsi generic sg1 type 0
scsi 1:0:0:0: Attached scsi generic sg2 type 5
tg3.c:v3.106 (January 12, 2010)
PCI: Found IRQ 10 for device 0000:06:00.0
PCI: Sharing IRQ 10 with 0000:00:1a.1
PCI: Sharing IRQ 10 with 0000:00:1d.1
PCI: Setting latency timer of device 0000:06:00.0 to 64
eth0: Tigon3 [partno(BCM95761) rev 5761100 PHY(5761)] (PCI Express) 10/100/1000Base-T Ethernet 14:fe:b5:e9:5b:30
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
PCI: Found IRQ 11 for device 0000:00:1b.0
PCI: Sharing IRQ 11 with 0000:00:00.0
PCI: Sharing IRQ 11 with 0000:00:1a.0
PCI: Sharing IRQ 11 with 0000:03:00.0
PCI: Sharing IRQ 11 with 0000:05:00.0
PCI: Setting latency timer of device 0000:00:1b.0 to 64
sr0: scsi3-mmc drive: 1x/8x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
floppy0: no floppy controllers found
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
lp0: console ready
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.0.5 loaded
loop: loaded (max 8 devices)
EXT3 FS on dm-0, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sdb3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sdb2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 51511288k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:51511288k

论坛徽章:
15
射手座
日期:2014-02-26 13:45:082015年迎新春徽章
日期:2015-03-04 09:54:452015年辞旧岁徽章
日期:2015-03-03 16:54:15羊年新春福章
日期:2015-02-26 08:47:552015年亚洲杯之卡塔尔
日期:2015-02-03 08:33:45射手座
日期:2014-12-31 08:36:51水瓶座
日期:2014-06-04 08:33:52天蝎座
日期:2014-05-14 14:30:41天秤座
日期:2014-04-21 08:37:08处女座
日期:2014-04-18 16:57:05戌狗
日期:2014-04-04 12:21:33技术图书徽章
日期:2014-03-25 09:00:29
7 [报告]
发表于 2014-03-17 09:07 |只看该作者
SMP alternatives: switching to UP code
Freeing SMP alternatives: 32k freed
weird, boot CPU (#32) not listed by the BIOS.
估计是bios有问题,建议看看bios中是否能检测到所有的cpu,不行的话,可以考虑升级下bios,联系DELL售后。

论坛徽章:
33
荣誉会员
日期:2011-11-23 16:44:17天秤座
日期:2014-08-26 16:18:20天秤座
日期:2014-08-29 10:12:18丑牛
日期:2014-08-29 16:06:45丑牛
日期:2014-09-03 10:28:58射手座
日期:2014-09-03 16:01:17寅虎
日期:2014-09-11 14:24:21天蝎座
日期:2014-09-17 08:33:55IT运维版块每日发帖之星
日期:2016-04-17 06:23:27操作系统版块每日发帖之星
日期:2016-04-18 06:20:00IT运维版块每日发帖之星
日期:2016-04-24 06:20:0015-16赛季CBA联赛之天津
日期:2016-05-06 12:46:59
8 [报告]
发表于 2014-03-17 09:11 |只看该作者
回复 6# weizhl08


      为啥是 "acpi=off" 呀.

论坛徽章:
0
9 [报告]
发表于 2014-03-17 11:06 |只看该作者
回复 7# humjb_1983

多谢,能看出大致的原因不?


   

论坛徽章:
0
10 [报告]
发表于 2014-03-17 11:08 |只看该作者
回复 8# q1208c

呵呵,我对linux不熟,这是同事帮装的,请问是这个原因导致的吗?
怎么开启acpi=on?在哪里添加,麻烦详细说一下,多谢多谢


   
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP