免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
最近访问板块 发新帖
查看: 4664 | 回复: 2
打印 上一主题 下一主题

FUJITSU M8000内存deconfigure [复制链接]

论坛徽章:
0
跳转到指定楼层
1 [收藏(0)] [报告]
发表于 2014-04-02 19:36 |只看该作者 |倒序浏览
一台fujitsu M8000服务器重启后,CMU2板上内存有两条状态为fault,同组的内其他存状态为deconfigure。这种情况如何处理,换掉坏的内存就可以了吗?还是需要service code解锁?小弟是新手,没遇到此种情况,请各位赐教。谢谢了。

论坛徽章:
0
2 [报告]
发表于 2014-04-08 14:20 |只看该作者
查看手册后,得知Deconfigured As a result of another component’s faulted or degraded status, the
component is not operating. (The component itself is not faulted or degraded.) 更换故障内存后,状态正常。
共五种状态:
Faulted:      The component is faulty and not operating.
Degraded :  The component is operating. However, either an error has been detected or the component is faulty. As a result,  component might be operating with reduced functionality or performance.
Deconfigured: As a result of another component’s faulted or degraded status, the
component is not operating. (The component itself is not faulted or
degraded.)
Maintenance: The corresponding component is under maintenance. A
deletefru(, replacefru(, and addfru( operation is
currently underway.
Normal :            The component is operating normally.

论坛徽章:
0
3 [报告]
发表于 2014-04-08 14:24 |只看该作者
内存要更换,还要申请service password。如果firmware更新到1115以上,可以不用申请service password.
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP