免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
最近访问板块 发新帖
查看: 1222 | 回复: 0

[系统安装] u-boot.img生成问题 gentoo平台 [复制链接]

论坛徽章:
0
发表于 2014-04-12 13:33 |显示全部楼层
我要做的是根据http://dev.gentoo.org/~armin76/arm/pandaboard/install.xml 这个网址里的内容,将MLO,u-boot.img, uImage编译完成后拷到SD卡中,然后启动pandaboard。已经验证过MLO和uImage没有任何问题。u-boot.img也能成功编译出来,问题是启动不了。u-boot-tools 版本为2013.07,u-boot版本试过2013.04,2013.07,2013.10,latest,结果都一样启动不出来,调试信息如下:

U-boot 2013.10 (Apr 12 2014 - 05:08:24)

CPU   : OMAP4460 ES1.1
Board: OMAP4 Panda
I2C:     ready
DRAM: 1 GiB
MMC:   OMAP SD/MMC: 0
Using default environment

In:      serial
Out:    serial
Err:     serial
Net:    No ethernet found.
Hit any key to stop autoboot: 0
mmc0 is current device
SD/MMC found on device 0
reading boot.src
** Unable to read file boot.scr **
reading uEnv.txt
** Unable to read file uEnv.txt **
** File not found /boot/zImage **
Panda # _(光标停在这里)

求大神们帮忙看一下问题在哪里?

  
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP