升级内核到3.10.54系统启动报错

david2878

1.系统在重启时报如下错误，请高手指导
smpboot: CPU0: Intel(R) Core(TM) i7-3720QM CPU @ 2.60GHz (fam: 06, model: 3a, st
epping: 09)
Performance Events: 16-deep LBR, IvyBridge events, core PMU driver.
perf_event_intel: CPUID marked event: 'cpu cycles' unavailable
perf_event_intel: CPUID marked event: 'instructions' unavailable
perf_event_intel: CPUID marked event: 'bus cycles' unavailable
perf_event_intel: CPUID marked event: 'cache references' unavailable
perf_event_intel: CPUID marked event: 'cache misses' unavailable
perf_event_intel: CPUID marked event: 'branch instructions' unavailable
perf_event_intel: CPUID marked event: 'branch misses' unavailable


pci 0000:00:0f.0: BAR 6: assigned [mem 0xc0000000-0xc0007fff pref]
pci 0000:00:10.0: BAR 6: assigned [mem 0xc0008000-0xc000bfff pref]
pci 0000:00:15.3: BAR 13: can't assign io (size 0x1000)
pci 0000:00:15.4: BAR 13: can't assign io (size 0x1000)
pci 0000:00:15.5: BAR 13: can't assign io (size 0x1000)
pci 0000:00:15.6: BAR 13: can't assign io (size 0x1000)
pci 0000:00:15.7: BAR 13: can't assign io (size 0x1000)
pci 0000:00:16.3: BAR 13: can't assign io (size 0x1000)
pci 0000:00:16.4: BAR 13: can't assign io (size 0x1000)
pci 0000:00:16.5: BAR 13: can't assign io (size 0x1000)
pci 0000:00:16.6: BAR 13: can't assign io (size 0x1000)
pci 0000:00:16.7: BAR 13: can't assign io (size 0x1000)
pci 0000:00:17.3: BAR 13: can't assign io (size 0x1000)
pci 0000:00:17.4: BAR 13: can't assign io (size 0x1000)
pci 0000:00:17.5: BAR 13: can't assign io (size 0x1000)
pci 0000:00:17.6: BAR 13: can't assign io (size 0x1000)
pci 0000:00:17.7: BAR 13: can't assign io (size 0x1000)

2.系统重启时报
ioctl: Invalid argument

action08

你是用的什么方式升级的呀

david2878

我是用centos的源升级rhel6，用yum升级了部分程序模块，然后编译的内核。
回复 1# david2878


   

david2878

ioctl: Invalid argument,重启引起该错误的位置找到了，但还没有找到原因
1.在/etc/rc6.d/K90network 中有/etc/sysconfig/network-scripts/init.ipv6-global stop post这样的语句；
2.通过追踪发现在 init.ipv6-global脚本中在执行ipv6_cleanup_tunnel_devices时报错。