cisco 7609 slot1模块 和slot5引擎 自动重启

pingtelnet

slot1模块老是自动重启，我把slot1的模块放到3和4上也是同样
slot5引擎总是rom状态，手动也加载不了IOS，换过新引擎也不行

谁知道是什么问题啊？


ROUMCCPLS01_7609#show log
Syslog logging: enabled (0 messages dropped, 0 messages rate-limited, 0 flushes, 0 overruns, xml disabled, filtering disabled)

No Active Message Discriminator.



No Inactive Message Discriminator.


    Console logging: level errors, 534 messages logged, xml disabled,
                     filtering disabled
    Monitor logging: level debugging, 0 messages logged, xml disabled,
                     filtering disabled
    Buffer logging:  level debugging, 3319 messages logged, xml disabled,
                    filtering disabled
    Exception Logging: size (4096 bytes)
    Count and timestamp logging messages: disabled
    Persistent logging: disabled

No active filter modules.

    Trap logging: level debugging, 3323 message lines logged
        Logging to 192.168.10.103  (udp port 514,  audit disabled,
              authentication disabled, encryption disabled, link up),
              3323 message lines logged,
              0 message lines rate-limited,
              0 message lines dropped-by-MD,
              xml disabled, sequence number disabled
              filtering disabled
         
Log Buffer (8192 bytes):
1/1
*Oct 11 02:41:51.886: %OIR-6-INSCARD: Card inserted in slot 1, interfaces administratively shut down
*Oct 11 02:42:12.022: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on GigabitEthernet9/1 (not half duplex), with TongZhouGaoYaA FastEthernet0/0 (half duplex).
*Oct 11 02:43:05.444: %ONLINE-SP-6-TIMER: Module 5, Proc. 0. Failed to bring online because of timer event
*Oct 11 02:43:12.023: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on GigabitEthernet9/1 (not half duplex), with TongZhouGaoYaA FastEthernet0/0 (half duplex).
*Oct 11 02:43:16.183: %PFREDUN-SP-6-ACTIVE: Standby processor removed or reloaded, changing to Simplex mode
*Oct 11 02:43:16.183: %OIR-SP-3-PWRCYCLE: Card in module 5, is being power-cycled (Module reset)
*Oct 11 02:43:46.783: %CWAN_RP-3-POWER_CYCLE: Power cycling WAN module in slot 1/1. Find Master Timer expired
*Oct 11 02:43:46.791: %C6KPWR-SP-4-DISABLED: power to module in slot 1 set off (Reset)
*Oct 11 02:44:12.027: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on GigabitEthernet9/1 (not half duplex), with TongZhouGaoYaA FastEthernet0/0 (half duplex).
*Oct 11 02:44:30.912: %CWAN_RP-6-CARDRELOAD: Module reloaded on slot 1/1
*Oct 11 02:44:30.916: %OIR-6-INSCARD: Card inserted in slot 1, interfaces administratively shut down
*Oct 11 02:45:12.032: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on GigabitEthernet9/1 (not half duplex), with TongZhouGaoYaA FastEthernet0/0 (half duplex).
*Oct 11 02:46:12.033: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on GigabitEthernet9/1 (not half duplex), with TongZhouGaoYaA FastEthernet0/0 (half duplex).
*Oct 11 02:46:25.809: %CWAN_RP-3-POWER_CYCLE: Power cycling WAN module in slot 1/1. Find Master Timer expired
*Oct 11 02:46:25.817: %C6KPWR-SP-4-DISABLED: power to module in slot 1 set off (Reset)
*Oct 11 02:47:09.993: %CWAN_RP-6-CARDRELOAD: Module reloaded on slot 1/1
*Oct 11 02:47:09.997: %OIR-6-INSCARD: Card inserted in slot 1, interfaces administratively shut down
*Oct 11 02:47:12.037: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on GigabitEthernet9/1 (not half duplex), with TongZhouGaoYaA FastEthernet0/0 (half duplex).
*Oct 11 02:48:12.042: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on GigabitEthernet9/1 (not half duplex), with TongZhouGaoYaA FastEthernet0/0 (half duplex).
*Oct 11 02:49:04.894: %CWAN_RP-3-POWER_CYCLE: Power cycling WAN module in slot 1/1. Find Master Timer expired
*Oct 11 02:49:04.902: %C6KPWR-SP-4-DISABLED: power to module in slot 1 set off (Reset)
*Oct 11 02:49:12.046: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on GigabitEthernet9/1 (not half duplex), with TongZhouGaoYaA FastEthernet0/0 (half duplex).
*Oct 11 02:49:49.379: %CWAN_RP-6-CARDRELOAD: Module reloaded on slot 1/1
*Oct 11 02:49:49.383: %OIR-6-INSCARD: Card inserted in slot 1, interfaces administratively shut down
*Oct 11 02:50:12.047: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on GigabitEthernet9/1 (not half duplex), with TongZhouGaoYaA FastEthernet0/0 (half duplex).
*Oct 11 02:51:12.052: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on GigabitEthernet9/1 (not half duplex), with TongZhouGaoYaA FastEthernet0/0 (half duplex).
*Oct 11 02:51:44.280: %CWAN_RP-3-POWER_CYCLE: Power cycling WAN module in slot 1/1. Find Master Timer expired
*Oct 11 02:51:44.288: %C6KPWR-SP-4-DISABLED: power to module in slot 1 set off (Reset)
*Oct 11 02:52:12.056: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on GigabitEthernet9/1 (not half duplex), with TongZhouGaoYaA FastEthernet0/0 (half duplex).
*Oct 11 02:52:28.384: %CWAN_RP-6-CARDRELOAD: Module reloaded on slot 1/1
*Oct 11 02:52:28.388: %OIR-6-INSCARD: Card inserted in slot 1, interfaces administratively shut down
*Oct 11 02:53:12.057: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on GigabitEthernet9/1 (not half duplex), with TongZhouGaoYaA FastEthernet0/0 (half duplex).
*Oct 11 02:54:12.061: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on GigabitEthernet9/1 (not half duplex), with TongZhouGaoYaA FastEthernet0/0 (half duplex).
*Oct 11 02:54:23.285: %CWAN_RP-3-POWER_CYCLE: Power cycling WAN module in slot 1/1. Find Master Timer expired
*Oct 11 02:54:23.293: %C6KPWR-SP-4-DISABLED: power to module in slot 1 set off (Reset)
*Oct 11 02:55:07.466: %CWAN_RP-6-CARDRELOAD: Module reloaded on slot 1/1
*Oct 11 02:55:07.470: %OIR-6-INSCARD: Card inserted in slot 1, interfaces administratively shut down
*Oct 11 02:55:12.066: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on GigabitEthernet9/1 (not half duplex), with TongZhouGaoYaA FastEthernet0/0 (half duplex).
*Oct 11 02:56:12.066: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on GigabitEthernet9/1 (not half duplex), with TongZhouGaoYaA FastEthernet0/0 (half duplex).
*Oct 11 02:57:02.367: %CWAN_RP-3-POWER_CYCLE: Power cycling WAN module in slot 1/1. Find Master Timer expired
*Oct 11 02:57:02.375: %C6KPWR-SP-4-DISABLED: power to module in slot 1 set off (Reset)
*Oct 11 02:57:12.071: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on GigabitEthernet9/1 (not half duplex), with TongZhouGaoYaA FastEthernet0/0 (half duplex).
*Oct 11 02:57:46.651: %CWAN_RP-6-CARDRELOAD: Module reloaded on slot 1/1
*Oct 11 02:57:46.655: %OIR-6-INSCARD: Card inserted in slot 1, interfaces administratively shut down
*Oct 11 02:58:12.076: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on GigabitEthernet9/1 (not half duplex), with TongZhouGaoYaA FastEthernet0/0 (half duplex).
*Oct 11 02:59:12.080: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on GigabitEthernet9/1 (not half duplex), with TongZhouGaoYaA FastEthernet0/0 (half duplex).
*Oct 11 02:59:41.549: %CWAN_RP-3-POWER_CYCLE: Power cycling WAN module in slot 1/1. Find Master Timer expired
*Oct 11 02:59:41.561: %C6KPWR-SP-4-DISABLED: power to module in slot 1 set off (Reset)
*Oct 11 03:00:12.081: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on GigabitEthernet9/1 (not half duplex), with TongZhouGaoYaA FastEthernet0/0 (half duplex).
*Oct 11 03:00:19.417: %ONLINE-SP-6-TIMER: Module 5, Proc. 0. Failed to bring online because of timer event
*Oct 11 03:00:25.733: %CWAN_RP-6-CARDRELOAD: Module reloaded on slot 1/1
*Oct 11 03:00:25.737: %OIR-6-INSCARD: Card inserted in slot 1, interfaces administratively shut down
*Oct 11 03:00:30.149: %PFREDUN-SP-6-ACTIVE: Standby processor removed or reloaded, changing to Simplex mode
*Oct 11 03:00:30.149: %OIR-SP-3-PWRCYCLE: Card in module 5, is being power-cycled (Module reset)
*Oct 11 03:01:12.085: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on GigabitEthernet9/1 (not half duplex), with TongZhouGaoYaA FastEthernet0/0 (half duplex).
*Oct 11 03:02:12.090: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on GigabitEthernet9/1 (not half duplex), with TongZhouGaoYaA FastEthernet0/0 (half duplex).
*Oct 11 03:02:20.634: %CWAN_RP-3-POWER_CYCLE: Power cycling WAN module in slot 1/1. Find Master Timer expired
*Oct 11 03:02:20.650: %C6KPWR-SP-4-DISABLED: power to module in slot 1 set off (Reset)
*Oct 11 03:03:04.823: %CWAN_RP-6-CARDRELOAD: Module reloaded on slot 1/1
*Oct 11 03:03:04.827: %OIR-6-INSCARD: Card inserted in slot 1, interfaces administratively shut down
*Oct 11 03:03:12.091: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on GigabitEthernet9/1 (not half duplex), with TongZhouGaoYaA FastEthernet0/0 (half duplex).
*Oct 11 03:04:12.095: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on GigabitEthernet9/1 (not half duplex), with TongZhouGaoYaA FastEthernet0/0 (half duplex).
*Oct 11 03:04:59.724: %CWAN_RP-3-POWER_CYCLE: Power cycling WAN module in slot 1/1. Find Master Timer expired
*Oct 11 03:04:59.732: %C6KPWR-SP-4-DISABLED: power to module in slot 1 set off (Reset)
*Oct 11 03:05:12.100: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on GigabitEthernet9/1 (not half duplex), with TongZhouGaoYaA FastEthernet0/0 (half duplex).
*Oct 11 03:05:43.836: %CWAN_RP-6-CARDRELOAD: Module reloaded on slot 1/1
*Oct 11 03:05:43.840: %OIR-6-INSCARD: Card inserted in slot 1, interfaces administratively shut down
*Oct 11 03:06:12.100: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on GigabitEthernet9/1 (not half duplex), with TongZhouGaoYaA FastEthernet0/0 (half duplex).
ROUMCCPLS01_7609#

pingtelnet

没人知道吗