V240机器报错，麻烦大侠们看一下

sanyao1207

sc> poweron -c

SC Alert: Failed to send email alert for recent event.

SC Alert: Host System has Reset

SC Alert: Failed to send email alert for recent event.

SC Alert: Failed to send email alert for recent event.
Enter #. to return to ALOM.
0>Start Selftest.....
0>CPUs present in system: 0
0>Test CPU(s)....Done
0>Interrupt Crosscall....Done
0>Init Memory....Done
0>PLL Reset....Done
0>Init Memory....Done
0>Test Memory..../
0>ERROR: TEST = Set Mailbox
0>H/W under test = MB/P0/B0/D0 (Bank 0), Motherboard
0>Repair Instructions: Replace items in order listed by 'H/W under test' above.
0>MSG = Pin 51 failed on MB/P0/B0/D0 (Bank 0), Motherboard
0>END_ERROR

|
0>ERROR: TEST = Run POST from Memory
0>H/W under test = MB/P0/B0/D0 (Bank 0), Motherboard
0>Repair Instructions: Replace items in order listed by 'H/W under test' above.
0>MSG = Pin 51 failed on MB/P0/B0/D0 (Bank 0), Motherboard
0>END_ERROR

0>
0>ERROR: TEST = Run POST from Memory
0>H/W under test = MB/P0/B0/D0 (Bank 0), Motherboard
0>Repair Instructions: Replace items in order listed by 'H/W under test' above.
0>MSG = Incorrect checksum detected!!
        Expected: aee8
        Observed: 5bcf
0>END_ERROR

-
0>ERROR: TEST = Run POST from Memory
0>H/W under test = CPU0 Memory
0>Repair Instructions: Replace items in order listed by 'H/W under test' above.
0>MSG =
         *** Test Failed!! ***

0>END_ERROR

0>
0>ERROR: TEST = Run POST from Memory
0>H/W under test = CPU0 Memory
0>Repair Instructions: Replace items in order listed by 'H/W under test' above.
0>MSG = No good memory available on master CPU 0, rolling over to new Master.
0>END_ERROR

Done
0>ERROR:
0>      POST toplevel status has the following failures:
0>              MB/P0/B0/D0 (Bank 0), Motherboard
0>              MB/P0/B0/D1 (Bank 0), Motherboard
0>              MB/P0/B0/D0 (Bank 1), Motherboard
0>              MB/P0/B0/D1 (Bank 1), Motherboard
0>              MB/P0/B1/D0 (Bank 2), Motherboard
0>              MB/P0/B1/D1 (Bank 2), Motherboard
0>              MB/P0/B1/D0 (Bank 3), Motherboard
0>              MB/P0/B1/D1 (Bank 3), Motherboard
0>END_ERROR

0>
0>ERROR:        No good CPUs OR CPUs with good memory left.  Calling debug menu



是不是内存条坏了或者没插好？

kwtip

内存坏了                              

sanyao1207

我重新插拔了一下内存条，在启动的时候内存确实有问题，有一部分不能使用，之后我怀疑分区分的有问题就重新装了一下系统，现在好了呢回复 2# kwtip