hp-ux11.11系统panic无法正常启动，只能启动到维护模式，哪位大侠告知如何恢复

kevin_zte

Trying Primary Boot Path
------------------------
Booting...
Boot IO Dependent Code (IODC) revision 1


HARD Booted.

ISL Revision A.00.43  Apr 12, 2000

ISL booting  hpux -lq (;0)/stand/vmunix

Boot
: disk(0/1/1/0.0.0.0.0.0.0;0)/stand/vmunix
12062720 + 2584576 + 6073432 start 0x1fbae8




alloc_pdc_pages: Relocating PDC from 0xfffffff0f0c00000 to 0x3f900000.
gate64: sysvec_vaddr = 0xc0002000 for 2 pages
NOTICE: autofs_link(): File system was registered at index 3.
NOTICE: cachefs_link(): File system was registered at index 5.
NOTICE: nfs3_link(): File system was registered at index 6.
igelan0: INITIALIZING HP PCI 1000Base-T Core at hardware path 0/1/2/0
igelan1: INITIALIZING HP A9784-60002 PCI/PCI-X 1000Base-T FC/GigE Combo Adapter at hardware path 0/3/1/0/6/0
igelan2: INITIALIZING HP A9784-60002 PCI/PCI-X 1000Base-T FC/GigE Combo Adapter at hardware path 0/4/1/0/6/0

    System Console is on the Built-In Serial Interface
Entering cifs_init...
Initialization finished successfully... slot is 9
Logical volume 64, 0x3 configured as ROOT

linkstamp:          Mon Dec 2 10:00:57 EST 2013
_release_version:   @(#)       $Revision: vmunix:    vw: -proj    selectors: CUPI80_BL2000_1108 -c 'Vw for CUPI80_BL2000_1108 build' -- cupi80_bl2000_1108 'CUPI80_BL2000_1108'  Wed N


Firmware Version  45.44

Duplex Console IO Dependent Code (IODC) revision 1



Stored message buffer up to panic:
gate64: sysvec_vaddr = 0xc0002000 for 2 pages
NOTICE: autofs_link(): File system was registered at index 3.
NOTICE: cachefs_link(): File system was registered at index 5.
NOTICE: nfs3_link(): File system was registered at index 6.
0 sba
0/0 lba
0/0/1/0 hcd
0/0/1/0.1 hub
0/0/1/1 hcd
0/0/1/1.1 hub
0/0/1/2 ehci
0/0/2/0 side_ba
0/0/2/0.0 side
0/0/2/0.0.0 tgt
0/0/2/0.0.0.0 sdisk
0/0/2/0.0.7 tgt
0/0/2/0.0.7.0 sctl
0/0/2/0.1 side
0/0/2/0.1.7 tgt
0/0/2/0.1.7.0 sctl
0/1 lba
c8xx BUS: 2 SCSI C1010 Ultra160 Wide LVD  assigned CPU: 0
0/1/1/0 c8xx
0/1/1/0.0 tgt
0/1/1/0.0.0 sdisk
0/1/1/0.7 tgt
0/1/1/0.7.0 sctl
c8xx BUS: 3 SCSI C1010 Ultra160 Wide LVD  assigned CPU: 1
0/1/1/1 c8xx
0/1/1/1.2 tgt
0/1/1/1.2.0 sdisk
0/1/1/1.3 tgt
0/1/1/1.3.0 stape
0/1/1/1.7 tgt
0/1/1/1.7.0 sctl
0/1/2/0 igelan
0/2 lba
0/3 lba
0/3/1/0 PCItoPCI
fcd: Claimed HP A9784-60002 2Gb PCI/PCI-X Fibre Channel port at hardware path 0/3/1/0/4/0 (FC Port 1 on HBA)
0/3/1/0/4/0 fcd
0/3/1/0/4/0.8 fcd_fcp
0/3/1/0/4/0.8.0.255.0 fcd_vbus
0/3/1/0/4/0.8.0.255.0.0 tgt
0/3/1/0/4/0.8.0.255.0.0.0 sdisk
0/3/1/0/4/0.8.0.255.0.0.1 sdisk
0/3/1/0/6/0 igelan
0/4 lba
0/4/1/0 PCItoPCI
fcd: Claimed HP A9784-60002 2Gb PCI/PCI-X Fibre Channel port at hardware path 0/4/1/0/4/0 (FC Port 1 on HBA)
0/4/1/0/4/0 fcd
0/4/1/0/4/0.8 fcd_fcp
0/4/1/0/4/0.8.0.255.0 fcd_vbus
0/4/1/0/4/0.8.0.255.0.0 tgt
0/4/1/0/4/0.8.0.255.0.0.0 sdisk
0/4/1/0/4/0.8.0.255.0.0.1 sdisk
0/4/1/0/6/0 igelan
0/6 lba
0/7 lba
0/7/1/0 asio0
0/7/1/1 asio0
8 memory
16 ipmi
128 processor
129 processor
152 processor
153 processor
igelan0: INITIALIZING HP PCI 1000Base-T Core at hardware path 0/1/2/0
igelan1: INITIALIZING HP A9784-60002 PCI/PCI-X 1000Base-T FC/GigE Combo Adapter at hardware path 0/3/1/0/6/0
igelan2: INITIALIZING HP A9784-60002 PCI/PCI-X 1000Base-T FC/GigE Combo Adapter at hardware path 0/4/1/0/6/0

    System Console is on the Built-In Serial Interface
Entering cifs_init...
Initialization finished successfully... slot is 9
Logical volume 64, 0x3 configured as ROOT

linkstamp:          Mon Dec 2 10:00:57 EST 2013
_release_version:   @(#)       $Revision: vmunix:    vw: -proj    selectors: CUPI80_BL2000_1108 -c 'Vw for CUPI80_BL2000_1108 build' -- cupi80_bl2000_1108 'CUPI80_BL2000_1108'  Wed Nov  8 19:24:56 PST 2000 $
panic: lv_fixrootlv: Stale extent array overflow

PC-Offset Stack Trace (read across, top of stack is 1st):
  0x002d2028  0x008de80c  0x008d50f4
  0x008d573c  0x008d5c3c  0x008dea08
  0x00600174  0x005fcbcc  0x0041a760
  0x00531484  0x0041c448  0x00176a74
  0x001fc0e4
End Of Stack

Trap Type 15 (Data page fault):
  Instruction Address (pcsq.pcoq) = 0x0.0x535840
  Instruction (iir) = 0x531a0020 (load/store)
  Target Address (isr.ior) = 0x0.0x0000000000000010
  Base Register (gr24) = 0x0000000000000000
  Savestate Ptr (ssp) = 0x31e7c00.0x400003ffffff1478
  Savestate Return Pointer (ss_rp) = 0x0000000000000000

System Panic:

linkstamp:          Mon Dec 2 10:00:57 EST 2013
_release_version:   @(#)       $Revision: vmunix:    vw: -proj    selectors: CUPI80_BL2000_1108 -c 'Vw for CUPI80_BL2000_1108 build' -- cupi80_bl2000_1108 'CUPI80_BL2000_1108'  Wed Nov  8 19:24:56 PST 2000 $
panic: Data page fault



*** A system crash has occurred.  (See the above messages for details.)
*** The system is now preparing to dump physical memory to disk, for use
*** in debugging the crash.

ERROR:  Your system crashed before I/O and dump configuration was complete.
        A crash dump cannot be taken under these circumstances without
        special configuration.  Contact your HP support representative.

cjhvslhb

1.能否启动到单用户模式；
2.再尝试从单用户启动到多用户模式；
3.B2000有液晶面板，注意液晶面板的报错；
4.如果不能启动到单用户模式，可以用recovery shell尝试修复。

kevin_zte

启动单用户模式也是报一样的错误，可以从维护模式挂载vg00，然后 init3 启动到多用户模式，然后启动双机和数据库都正常，重新做过一遍mkboot、lnlvboot也无效。