- 论坛徽章:
- 0
|
*****************************************************
PSU#2 Status:Normal; Serial:1357FYG-0845AD00KT;
+ FRU-Part-Number:CF00300-2011 0202 /300-2011-02-02;
+ Power_Status:Input fail; AC: - ;
***************************************************
更换完后认不到电源psu#2
XSCF>
XSCF> replacefru
----------------------------------------------------------------------
Maintenance/Replacement Menu
Please select a type of FRU to be replaced.
1. FAN (Fan Unit)
2. PSU (Power Supply Unit)
----------------------------------------------------------------------
Select [1,2|c:cancel] :2
----------------------------------------------------------------------
Maintenance/Replacement Menu
Please select a PSU to be replaced.
No. FRU Status
--- --------------- ------------------
1. PSU#0 Normal
2. PSU#1 Normal
3. PSU#2 Normal
4. PSU#3 Normal
----------------------------------------------------------------------
Select [1-4|b:back] :3
You are about to replace PSU#2.
Do you want to continue?[r:replace|c:cancel] :r
Please confirm the Ready LED is not lit and that the Check LED is
blinking.
If this is the case, please replace PSU#2.
After replacement has been completed, please select[f:finish] :f
[Warning:005]
Failed to find PSU#2.
Do you want to try to replace PSU#2 again?
[r:replace|c:cancel] :r
Please confirm the Ready LED is not lit and that the Check LED is
blinking.
If this is the case, please replace PSU#2.
After replacement has been completed, please select[f:finish] :f
[Warning:005]
Failed to find PSU#2.
Do you want to try to replace PSU#2 again?
[r:replace|c:cancel] :c
[Warning:305]
PSU#2 could not be recognized.
Please execute replacefru again to complete the replacement
of PSU#2.
Replacement operation is terminated.[c:cancel] :c |
|