请教一下BSD下的MPD使用radius协议认证时的mpd-limit属性取值问题

luokaichuang

请教一下BSD下的MPD使用radius协议认证时的mpd-limit属性取值问题，我见过别人的freeradius这个属性的取值是这样的
mpd-limit        +=        in#1=all shape 409600  76800 pass
mpd-limit        +=        out#2=all shape 6144000 1152000 pass

pass关键字后面的76800和1152000这两个值是什么意思呢？

lsstarboy

Action can be: "" (do nothing, just account), "pass" (stop processing and pass packet), "deny" (stop processing and drop packet), "rate-limit" (do Cisco-like rate-limit), "shape" (do simple RED aware traffic shaping).

Actions "rate-limit" and "shape" can have optional "pass" suffix to stop processing after doing this action.

action: | pass | deny | rate-limit {rate(bits/s)} [{normal burst(bytes)} [{extended burst(bytes)}]] [pass] | shape {rate(bits/s)} [{burst(bytes)}] [pass]

lsstarboy

突发值，注意单位为字节，也就是会在某一个时候超过限速。

luokaichuang

感谢指点