v890安装solaris10以后自动进入OK模式

qq394099341

Sun Fire V890, No Keyboard
Copyright 2006 Sun Microsystems, Inc.  All rights reserved.
OpenBoot 4.22.19, 16384 MB memory installed, Serial #71002447.
Ethernet address 0:14:4f:3b:69:4f, Host ID: 843b694f.




                                                                     
Boot device: rootdisk  File and args:
SunOS Release 5.10 Version Generic_150400-17 64-bit
Copyright (c) 1983, 2014, Oracle and/or its affiliates. All rights reserved.
WARNING: emlxs0: Firmware update required.
        (To trigger an update, a manual HBA or link reset using luxadm, fcadm, or emlxadm is required.)
Hostname: xzm-dbserver1
WARNING: emlxs1: Firmware update required.
        (To trigger an update, a manual HBA or link reset using luxadm, fcadm, or emlxadm is required.)
Type  'go' to resume
{10} ok 嘁鶥
进入到这以后键盘就不管用了，不知道这是什么原因引起的 ?有哪位碰到过类似的情况，给个见解吧，可以加我qq：261414985，谢谢

东方蜘蛛

你的HBA卡需要升级FW。。。

ac220v

WARNING: emlxs1: Firmware update required.

qq394099341

这个能引起系统进入到OK模式？有点不理解回复 3# ac220v


   

winson_tse

能引致设备自动进入OK模式的原因很多的，设备硬件故障，或瞬间电压不稳定，误执行问题等等会发生，从你的日志看，很明显是提示你的emlxs HBA  Firmware 需要更新，很可能你新安装的Solaris 10系统太新，你的emles HBA卡本身驱动FW太低出现兼容性问题引致的问题，先更新升级FW吧。

winson_tse

能引致设备自动进入OK模式的原因很多的，设备硬件故障，或瞬间电压不稳定，误执行问题等等会发生，从你的日志看，很明显是提示你的emlxs HBA  Firmware 需要更新，很可能你新安装的Solaris 10系统太新，你的emles HBA卡本身驱动FW太低出现兼容性问题引致的问题，先更新升级FW吧。

qq394099341

你好，这个日志是我新抓的，你看看跟以前的又报的不一样了
Rebooting with command: boot
Boot device: disk  File and args:
SunOS Release 5.10 Version Generic_150400-17 64-bit
Copyright (c) 1983, 2014, Oracle and/or its affiliates. All rights reserved.
ip_arp_done: init failed
Failed to configure IPv4 interface(s): ce0
Hostname: xzmdbserver2
WARNING: emlxs0: Firmware update required.
        (To trigger an update, a manual HBA or link reset using luxadm, fcadm, or emlxadm is required.)
WARNING: emlxs1: Firmware update required.
        (To trigger an update, a manual HBA or link reset using luxadm, fcadm, or emlxadm is required.)
Jul 14 10:02:43 svc.startd[9]: svc:/system/power:default: Method "/lib/svc/method/svc-power start" failed with exit status 96.
Jul 14 10:02:43 svc.startd[9]: svc:/network/ilomconfig-interconnect:default: Method "/lib/svc/method/svc-ilomconfig-interconnect start" failed with exit status 96.
Jul 14 10:02:43 svc.startd[9]: network/ilomconfig-interconnect:default misconfigured: transitioned to maintenance (see 'svcs -xv' for details)
Jul 14 10:02:43 svc.startd[9]: system/power:default misconfigured: transitioned to maintenance (see 'svcs -xv' for details)
Jul 14 10:02:44 in.mpathd[237]: The link has gone down on eri0
Jul 14 10:02:44 in.mpathd[237]: NIC failure detected on eri0 of group sc_ipmp1
Jul 14 10:02:44 in.mpathd[237]: The link has gone down on ce3
Jul 14 10:02:44 in.mpathd[237]: NIC failure detected on ce3 of group sc_ipmp1
Jul 14 10:02:45 svc.startd[9]: svc:/network/iscsi/initiator:default: Method "/lib/svc/method/iscsid start" failed with exit status 96.
Jul 14 10:02:45 svc.startd[9]: network/iscsi/initiator:default misconfigured: transitioned to maintenance (see 'svcs -xv' for details)
Jul 14 10:02:55 svc.startd[9]: svc:/system/cron:default: Method "/lib/svc/method/svc-cron" failed with exit status 96.
Jul 14 10:02:55 svc.startd[9]: system/cron:default misconfigured: transitioned to maintenance (see 'svcs -xv' for details)
Jul 14 10:02:56 svc.startd[9]: svc:/application/font/fc-cache:default: Method "/usr/bin/fc-cache" failed with exit status 96.
Jul 14 10:02:56 svc.startd[9]: application/font/fc-cache:default misconfigured: transitioned to maintenance (see 'svcs -xv' for details)
Jul 14 10:02:58 svc.startd[9]: svc:/network/rpc/bind:default: Method "/lib/svc/method/rpc-bind start" failed with exit status 96.
Jul 14 10:02:58 svc.startd[9]: network/rpc/bind:default misconfigured: transitioned to maintenance (see 'svcs -xv' for details)
Jul 14 10:02:58 svc.startd[9]: svc:/network/routing/route:default: Method "/lib/svc/method/svc-route" failed with exit status 96.
Jul 14 10:02:58 svc.startd[9]: network/routing/route:default misconfigured: transitioned to maintenance (see 'svcs -xv' for details)
Jul 14 10:02:59 svc.startd[9]: svc:/system/postrun:default: Method "/var/lib/postrun/postrun-runq" failed with exit status 96.
Jul 14 10:02:59 svc.startd[9]: system/postrun:default misconfigured: transitioned to maintenance (see 'svcs -xv' for details)
Jul 14 10:02:59 svc.startd[9]: instance svc:/system/sac:default exited with status 96
Jul 14 10:02:59 svc.startd[9]: instance svc:/system/sac:default exited with status 96
Jul 14 10:03:00 svc.startd[9]: instance svc:/system/sac:default exited with status 96
syslogd: line 24: WARNING: loghost could not be resolved
Jul 14 10:03:00 xzmdbserver2 svc.startd[9]: system/webconsole:console misconfigured: transitioned to maintenance (see 'svcs -xv' for details)

xzmdbserver2 console login: Jul 14 10:03:01 xzmdbserver2 sendmail[450]: My unqualified host name (xzmdbserver2) unknown; sleeping for retry
Type  'go' to resume
{10} ok ??
能看出是HBA FW版本的问题还是系统服务没起来造成的进入OK模式呢？
回复 6# winson_tse