免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
最近访问板块 发新帖
查看: 6627 | 回复: 3

SUN T2000双机环境下更换sc电池的步骤及可能遇到的问题! [复制链接]

论坛徽章:
0
发表于 2015-10-19 19:35 |显示全部楼层
本帖最后由 mysafehouse 于 2015-10-20 08:45 编辑

明晚要去操作sun t2000的sc电池更换,由于现场是两台t2000做的双机,使用的是sun cluster双机软件,听说双机环境下更换电池要麻烦一些,而我这次只换其中一台机器(假设为机器A)的电池,想问一下,有过操作经验的朋友,这种情况下的具体操作如何?双机中的另外一台机器(假设为B)是否需要做什么操作?由于这个机型操作的不多,最好能有详细说明,谢谢了!

论坛徽章:
2
双鱼座
日期:2014-02-23 12:10:03操作系统版块每日发帖之星
日期:2015-12-17 06:20:00
发表于 2015-10-20 10:52 |显示全部楼层
可参考HandBook相关文档:
How to Replace a Sun Fire T2000 Service Processor Battery:ATR:1180:0

论坛徽章:
0
发表于 2015-10-20 11:35 |显示全部楼层
回复 2# 东方蜘蛛

蜘蛛哥,不好意思,操作手册我看了,有个地方不明白,里面提到在进入系统更改系统时间,要boot -s进入到单用户模式下,防止错误的日期会影响某些程序的运行,具体如下:
At OK prompt:
Note: The ALOM date and Solaris date are not in sync. The Solaris date may not be correct and should be set separately.
1. Boot -s (to avoid any applications being affected by wrong OS date).
2. Use date command to set the correct OS date (optional: init 0, boot -s to verify)

另外看到文档提示如果是sun cluster双机环境需要将机器启动到单节点更改系统时间后再重启,原文如下:
sun cluster需启动到单节点更改系统时间,然后reboot重启
{0} ok
{0} ok
{0} ok boot -x    //启动sun cluster到单节点



那么对于我要操作的机器是直接启动到单节点状态下更改时间吧?装有sun cluster环境的双机更换电池操作,只有这一特殊步骤么?

论坛徽章:
2
双鱼座
日期:2014-02-23 12:10:03操作系统版块每日发帖之星
日期:2015-12-17 06:20:00
发表于 2015-10-22 10:02 |显示全部楼层
NOTE: If the server node is a part of the Oracle Solaris Cluster (OSC) configuration you'll need to boot into single-user
'out' of cluster:   
   ok boot -xs

Using "boot -s" in OSC configuration will lead to an attempt to join the cluster and likely hang when the date is so far off.
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP