linux总是不停的重启，用着用着就重启了。

shi_shijun

事情是这样，之前有一台服务器喝酒没用出了点小毛病，我一时脑残就直接shutdown关掉了，~~然后机器就黑掉让机房的朋友帮我重新开一下，然后开起来之后就出毛病了，SSH能连得上，但是总是会莫名的重启，shell里直接显示The system is going down for reboot NOW，不是在日志里显示。! 求大神帮帮忙看下是怎么回事。

shi_shijun

有大神帮忙看看吗~

yyu0378

检查日志先

shi_shijun

messages  日志一直开着，关机前最后的日志在最下面。




Aug 15 19:53:01 EPG /usr/sbin/cron[8620]: (root) CMD (/home/zxin10/task/epgmonitor.sh )
Aug 15 19:53:01 EPG /usr/sbin/cron[8621]: (root) CMD (/home/zxin10/task/deal_longquery.sh >/dev/null 2>&1)
Aug 15 19:53:01 EPG /usr/sbin/cron[8622]: (root) CMD (/home/zxin10/task/cpuio_stat.sh >/dev/null 2>&1)
Aug 15 19:53:01 EPG /usr/sbin/cron[8623]: (root) CMD (/home/zxin10/was/script/task_perf21.sh)
Aug 15 19:53:01 EPG /usr/sbin/cron[8624]: (root) CMD (/home/zxin10/was/script/starttop.sh)
Aug 15 19:53:01 EPG /usr/sbin/cron[8625]: (root) CMD (/home/zxagent/bin/watch_devcomm.sh >/dev/null 2>&1)
Aug 15 19:53:08 EPG su: (to root) root on /dev/console
Aug 15 19:53:08 EPG su: (to root) root on /dev/console






Aug 15 19:54:01 EPG /usr/sbin/cron[8968]: (root) CMD (/home/zxin10/task/cpuio_stat.sh >/dev/null 2>&1)
Aug 15 19:54:01 EPG /usr/sbin/cron[8970]: (root) CMD (/home/zxagent/bin/watch_devcomm.sh >/dev/null 2>&1)
Aug 15 19:54:01 EPG /usr/sbin/cron[8969]: (root) CMD (/home/zxin10/task/epgmonitor.sh )
Aug 15 19:54:01 EPG /usr/sbin/cron[8971]: (root) CMD (/home/zxin10/task/deal_longquery.sh >/dev/null 2>&1)
Aug 15 19:54:01 EPG /usr/sbin/cron[8972]: (root) CMD (/home/zxin10/was/script/task_perf21.sh)
Aug 15 19:54:01 EPG /usr/sbin/cron[8973]: (root) CMD (/home/zxin10/was/script/starttop.sh)
Aug 15 19:54:26 EPG su: (to root) root on /dev/console
Aug 15 19:55:01 EPG /usr/sbin/cron[9432]: (root) CMD (/home/zxin10/task/epgmonitor.sh )
Aug 15 19:55:01 EPG /usr/sbin/cron[9433]: (root) CMD (/home/zxagent/bin/watch_devcomm.sh >/dev/null 2>&1)
Aug 15 19:55:01 EPG /usr/sbin/cron[9434]: (root) CMD (/home/zxin10/task/deal_longquery.sh >/dev/null 2>&1)
Aug 15 19:55:01 EPG /usr/sbin/cron[9435]: (root) CMD (/home/zxin10/task/mysql_sqlcount_stat.sh >/dev/null 2>&1)
Aug 15 19:55:01 EPG /usr/sbin/cron[9436]: (root) CMD (/home/zxin10/task/cpuio_stat.sh >/dev/null 2>&1)
Aug 15 19:55:01 EPG /usr/sbin/cron[9437]: (root) CMD (/home/zxin10/was/script/task_perf21.sh)
Aug 15 19:55:01 EPG /usr/sbin/cron[9438]: (root) CMD (/home/zxin10/was/script/starttop.sh)
Aug 15 19:55:06 EPG su: (to root) root on /dev/console
Aug 15 19:55:06 EPG su: (to root) root on /dev/console




Aug 15 19:56:01 EPG /usr/sbin/cron[9781]: (root) CMD (/home/zxin10/was/script/starttop.sh)
Aug 15 19:56:01 EPG /usr/sbin/cron[9784]: (root) CMD (/home/zxagent/bin/watch_devcomm.sh >/dev/null 2>&1)
Aug 15 19:56:01 EPG /usr/sbin/cron[9782]: (root) CMD (/home/zxin10/task/deal_longquery.sh >/dev/null 2>&1)
Aug 15 19:56:01 EPG /usr/sbin/cron[9783]: (root) CMD (/home/zxin10/task/epgmonitor.sh )
Aug 15 19:56:01 EPG /usr/sbin/cron[9786]: (root) CMD (/home/zxin10/task/cpuio_stat.sh >/dev/null 2>&1)
Aug 15 19:56:01 EPG /usr/sbin/cron[9785]: (root) CMD (/home/zxin10/was/script/task_perf21.sh)
Aug 15 19:56:24 EPG su: (to root) root on /dev/console
Aug 15 19:57:01 EPG /usr/sbin/cron[10257]: (root) CMD (/home/zxin10/task/epgmonitor.sh )
Aug 15 19:57:01 EPG /usr/sbin/cron[10258]: (root) CMD (/home/zxagent/bin/watch_devcomm.sh >/dev/null 2>&1)
Aug 15 19:57:01 EPG /usr/sbin/cron[10259]: (root) CMD (/home/zxin10/task/deal_longquery.sh >/dev/null 2>&1)
Aug 15 19:57:01 EPG /usr/sbin/cron[10260]: (root) CMD (/home/zxin10/task/cpuio_stat.sh >/dev/null 2>&1)
Aug 15 19:57:01 EPG /usr/sbin/cron[10261]: (root) CMD (/home/zxin10/was/script/task_perf21.sh)
Aug 15 19:57:01 EPG /usr/sbin/cron[10262]: (root) CMD (/home/zxin10/was/script/starttop.sh)
Aug 15 19:57:05 EPG su: (to root) root on /dev/console
Aug 15 19:57:05 EPG su: (to root) root on /dev/console

Broadcast message from root (console) (Mon Aug 15 19:57:32 2016):

The system is going down for reboot NOW!
Aug 15 19:57:32 EPG shutdown[10507]: shutting down for system reboot
Aug 15 19:57:32 EPG init: Switching to runlevel: 6
Aug 15 19:57:34 EPG kernel: [  679.510259] bootsplash: status on console 0 changed to on
Aug 15 19:57:35 EPG sshd[3484]: Received signal 15; terminating.

Broadcast message from root (console) (Mon Aug 15 19:57:43 2016):

The system is going down for reboot NOW!
Aug 15 19:57:43 EPG shutdown[10749]: shutting down for system reboot

Aug 15 19:57:54 EPG shutdown[10794]: shutting down for system reboot
The system is going down for reboot NOW!

Broadcast message from root (console) (Mon Aug 15 19:58:04 2016):

The system is going down for reboot NOW!
Aug 15 19:58:04 EPG shutdown[10855]: shutting down for system reboot

Broadcast message from root (console) (Mon Aug 15 19:58:15 2016):

The system is going down for reboot NOW!
Aug 15 19:58:15 EPG shutdown[10887]: shutting down for system reboot

Broadcast message from root (console) (Mon Aug 15 19:58:25 2016):

The system is going down for reboot NOW!
Aug 15 19:58:25 EPG shutdown[10919]: shutting down for system reboot
Aug 15 19:58:26 EPG su: (to root) root on /dev/console
Aug 15 19:58:36 EPG su: (to root) root on /dev/console
Aug 15 19:58:36 EPG su: (to root) root on /dev/console
Aug 15 19:58:36 EPG su: (to root) root on /dev/console
Aug 15 19:58:51 EPG auditd[2974]: The audit daemon is exiting.
Aug 15 19:58:52 EPG haveged: haveged stopping due to signal 15
Aug 15 19:58:53 EPG rpcbind: rpcbind terminating on signal. Restart with "rpcbind -w"
Aug 15 19:58:53 EPG kernel: Kernel logging (proc) stopped.
Aug 15 19:58:53 EPG kernel: Kernel log daemon terminating.
Aug 15 19:58:53 EPG syslog-ng[1871]: Termination requested via signal, terminating;
Aug 15 19:58:53 EPG syslog-ng[1871]: syslog-ng shutting down; version='2.0.9'

shi_shijun

如下。回复 3# yyu0378


   

shi_shijun

Aug 16 09:18:01 EPG /usr/sbin/cron[8236]: (root) CMD (/home/zxin10/was/script/task_perf21.sh)
Aug 16 09:18:01 EPG /usr/sbin/cron[8239]: (root) CMD (/home/zxagent/bin/watch_devcomm.sh >/dev/null 2>&1)
Aug 16 09:18:01 EPG /usr/sbin/cron[8235]: (root) CMD (/home/zxin10/task/deal_longquery.sh >/dev/null 2>&1)
Aug 16 09:18:01 EPG /usr/sbin/cron[8240]: (root) CMD (/home/zxin10/was/script/starttop.sh)
Aug 16 09:18:01 EPG /usr/sbin/cron[8237]: (root) CMD (/home/zxin10/task/epgmonitor.sh )
Aug 16 09:18:01 EPG /usr/sbin/cron[8238]: (root) CMD (/home/zxin10/task/cpuio_stat.sh >/dev/null 2>&1)
Aug 16 09:18:29 EPG su: (to root) root on /dev/console
Aug 16 09:19:01 EPG /usr/sbin/cron[8740]: (root) CMD (/home/zxin10/task/cpuio_stat.sh >/dev/null 2>&1)
Aug 16 09:19:01 EPG /usr/sbin/cron[8739]: (root) CMD (/home/zxin10/was/script/task_perf21.sh)
Aug 16 09:19:01 EPG /usr/sbin/cron[8738]: (root) CMD (/home/zxagent/bin/watch_devcomm.sh >/dev/null 2>&1)
Aug 16 09:19:01 EPG /usr/sbin/cron[8743]: (root) CMD (/home/zxin10/was/script/starttop.sh)
Aug 16 09:19:01 EPG /usr/sbin/cron[8741]: (root) CMD (/home/zxin10/task/epgmonitor.sh )
Aug 16 09:19:01 EPG /usr/sbin/cron[8742]: (root) CMD (/home/zxin10/task/deal_longquery.sh >/dev/null 2>&1)
Aug 16 09:19:10 EPG su: (to root) root on /dev/console
Aug 16 09:19:10 EPG su: (to root) root on /dev/console
Aug 16 09:19:38 EPG shutdown[8994]: shutting down for system reboot
Aug 16 09:19:38 EPG init: Switching to runlevel: 6
Aug 16 09:19:39 EPG kernel: [  680.676888] bootsplash: status on console 0 changed to on
Aug 16 09:19:40 EPG sshd[3494]: Received signal 15; terminating.
Aug 16 09:19:48 EPG shutdown[9236]: shutting down for system reboot
Aug 16 09:19:59 EPG shutdown[9276]: shutting down for system reboot
Aug 16 09:20:09 EPG shutdown[9343]: shutting down for system reboot
Aug 16 09:20:20 EPG shutdown[9375]: shutting down for system reboot
Aug 16 09:20:31 EPG shutdown[9408]: shutting down for system reboot
Aug 16 09:20:31 EPG su: (to root) root on /dev/console
Aug 16 09:20:41 EPG su: (to root) root on /dev/console
Aug 16 09:20:41 EPG su: (to root) root on /dev/console
Aug 16 09:20:41 EPG su: (to root) root on /dev/console
Aug 16 09:20:57 EPG auditd[2984]: The audit daemon is exiting.
Aug 16 09:20:57 EPG haveged: haveged stopping due to signal 15
Aug 16 09:20:58 EPG rpcbind: rpcbind terminating on signal. Restart with "rpcbind -w"
Aug 16 09:20:58 EPG kernel: Kernel logging (proc) stopped.
Aug 16 09:20:58 EPG kernel: Kernel log daemon terminating.
Aug 16 09:20:58 EPG syslog-ng[1881]: Termination requested via signal, terminating;
Aug 16 09:20:58 EPG syslog-ng[1881]: syslog-ng shutting down; version='2.0.9'
Aug 16 09:23:32 EPG syslog-ng[1876]: syslog-ng starting up; version='2.0.9'
Aug 16 09:23:32 EPG firmware.sh[1904]: Cannot find  firmware file 'intel-ucode/06-3e-04'
Aug 16 09:23:32 EPG firmware.sh[1910]: Cannot find  firmware file 'intel-ucode/06-3e-04'
Aug 16 09:23:32 EPG firmware.sh[1922]: Cannot find  firmware file 'intel-ucode/06-3e-04'
Aug 16 09:23:32 EPG firmware.sh[1934]: Cannot find  firmware file 'intel-ucode/06-3e-04'
Aug 16 09:23:32 EPG firmware.sh[1948]: Cannot find  firmware file 'intel-ucode/06-3e-04'
Aug 16 09:23:32 EPG firmware.sh[1961]: Cannot find  firmware file 'intel-ucode/06-3e-04'
Aug 16 09:23:32 EPG firmware.sh[1974]: Cannot find  firmware file 'intel-ucode/06-3e-04'
Aug 16 09:23:32 EPG firmware.sh[1987]: Cannot find  firmware file 'intel-ucode/06-3e-04'
Aug 16 09:23:32 EPG rchal: CPU frequency scaling is not supported by your processor.
Aug 16 09:23:32 EPG rchal: boot with 'CPUFREQ=no' in to avoid this warning.
Aug 16 09:23:32 EPG rchal: Cannot load cpufreq governors - No cpufreq driver available
Aug 16 09:23:34 EPG ifup:     lo        
Aug 16 09:23:34 EPG ifup:     lo        
Aug 16 09:23:34 EPG ifup: IP address: 127.0.0.1/8  
Aug 16 09:23:34 EPG ifup:  
Aug 16 09:23:34 EPG ifup:               
Aug 16 09:23:34 EPG ifup: IP address: 127.0.0.2/8  
Aug 16 09:23:34 EPG ifup:  
Aug 16 09:23:34 EPG ifup:     em1       device: Broadcom Corporation NetXtreme BCM5720 Gigabi
Aug 16 09:23:35 EPG ifup:     em1      
Aug 16 09:23:35 EPG ifup: IP address: 10.61.13.44/24  
Aug 16 09:23:35 EPG ifup:  
Aug 16 09:23:36 EPG SuSEfirewall2: SuSEfirewall2 not active
Aug 16 09:23:36 EPG ifup:     em2       device: Broadcom Corporation NetXtreme BCM5720 Gigabi
Aug 16 09:23:36 EPG ifup:               No configuration found for em2
Aug 16 09:23:36 EPG ifup:     em3       device: Broadcom Corporation NetXtreme BCM5720 Gigabi
Aug 16 09:23:36 EPG ifup:               No configuration found for em3
Aug 16 09:23:36 EPG ifup:     em4       device: Broadcom Corporation NetXtreme BCM5720 Gigabi
Aug 16 09:23:36 EPG ifup:               No configuration found for em4
Aug 16 09:23:36 EPG auditd[2979]: Started dispatcher: /sbin/audispd pid: 2981
Aug 16 09:23:36 EPG audispd: priority_boost_parser called with: 4
Aug 16 09:23:36 EPG audispd: af_unix plugin initialized
Aug 16 09:23:36 EPG audispd: audispd initialized with q_depth=80 and 1 active plugins
Aug 16 09:23:37 EPG auditd[2979]: Init complete, auditd 1.7.7 listening for events (startup state disable)
Aug 16 09:23:37 EPG kernel: klogd 1.4.1, log source = /proc/kmsg started.
Aug 16 09:23:37 EPG kernel: [   14.616494] type=1400 audit(1471310608.412:2): apparmor="STATUS" operation="profile_load" name="/bin/ping" pid=1500 comm="apparmor_parser"
Aug 16 09:23:37 EPG kernel: [   14.659243] type=1400 audit(1471310608.456:3): apparmor="STATUS" operation="profile_load" name="/sbin/klogd" pid=1506 comm="apparmor_parser"
Aug 16 09:23:37 EPG kernel: [   14.737423] type=1400 audit(1471310608.536:4): apparmor="STATUS" operation="profile_load" name="/sbin/syslog-ng" pid=1510 comm="apparmor_parser"
Aug 16 09:23:37 EPG kernel: [   14.817129] type=1400 audit(1471310608.612:5): apparmor="STATUS" operation="profile_load" name="/sbin/syslogd" pid=1514 comm="apparmor_parser"
Aug 16 09:23:37 EPG kernel: [   14.862651] type=1400 audit(1471310608.660:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/PolicyKit/polkit-explicit-grant-helper" pid=1519 comm="apparmor_parser"
Aug 16 09:23:37 EPG kernel: [   14.907906] type=1400 audit(1471310608.704:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/PolicyKit/polkit-grant-helper" pid=1523 comm="apparmor_parser"
Aug 16 09:23:37 EPG kernel: [   14.985743] type=1400 audit(1471310608.784:: apparmor="STATUS" operation="profile_load" name="/usr/lib/PolicyKit/polkit-grant-helper-pam" pid=1527 comm="apparmor_parser"
Aug 16 09:23:37 EPG kernel: [   15.030602] type=1400 audit(1471310608.828:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/PolicyKit/polkit-read-auth-helper" pid=1531 comm="apparmor_parser"
Aug 16 09:23:37 EPG kernel: [   15.062776] type=1400 audit(1471310608.860:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/PolicyKit/polkit-resolve-exe-helper" pid=1535 comm="apparmor_parser"
Aug 16 09:23:37 EPG kernel: [   15.106995] type=1400 audit(1471310608.904:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/PolicyKit/polkit-revoke-helper" pid=1539 comm="apparmor_parser"
Aug 16 09:23:37 EPG kernel: [   18.309962] microcode: CPU0 sig=0x306e4, pf=0x1, revision=0x416
Aug 16 09:23:37 EPG kernel: [   18.330285] microcode: CPU1 sig=0x306e4, pf=0x1, revision=0x416
Aug 16 09:23:37 EPG kernel: [   18.337063] microcode: CPU2 sig=0x306e4, pf=0x1, revision=0x416
Aug 16 09:23:37 EPG kernel: [   18.343796] microcode: CPU3 sig=0x306e4, pf=0x1, revision=0x416
Aug 16 09:23:37 EPG kernel: [   18.350515] microcode: CPU4 sig=0x306e4, pf=0x1, revision=0x416
Aug 16 09:23:37 EPG kernel: [   18.356947] microcode: CPU5 sig=0x306e4, pf=0x1, revision=0x416
Aug 16 09:23:37 EPG kernel: [   18.363764] microcode: CPU6 sig=0x306e4, pf=0x1, revision=0x416
Aug 16 09:23:37 EPG kernel: [   18.370572] microcode: CPU7 sig=0x306e4, pf=0x1, revision=0x416
Aug 16 09:23:37 EPG kernel: [   18.377448] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
Aug 16 09:23:37 EPG kernel: [   20.010946] NET: Registered protocol family 27
Aug 16 09:23:37 EPG kernel: [   21.023587] tg3 0000:01:00.0: irq 118 for MSI/MSI-X
Aug 16 09:23:37 EPG kernel: [   21.023606] tg3 0000:01:00.0: irq 119 for MSI/MSI-X
Aug 16 09:23:37 EPG kernel: [   21.023623] tg3 0000:01:00.0: irq 120 for MSI/MSI-X
Aug 16 09:23:37 EPG kernel: [   21.023647] tg3 0000:01:00.0: irq 121 for MSI/MSI-X
Aug 16 09:23:37 EPG kernel: [   21.023662] tg3 0000:01:00.0: irq 122 for MSI/MSI-X
Aug 16 09:23:37 EPG kernel: [   22.135452] ADDRCONF(NETDEV_UP): em1: link is not ready
Aug 16 09:23:37 EPG kernel: [   23.121495] auditd (2979): /proc/2979/oom_adj is deprecated, please use /proc/2979/oom_score_adj instead.
Aug 16 09:23:37 EPG haveged: haveged starting up
Aug 16 09:23:37 EPG haveged: arch:        x86 vendor:      intel generic:     0 i_cache:     32 d_cache:     32 loop_idx:    30 loop_idxmax: 40 loop_sz:     31836 loop_szmax:  124334 etime:       22239 havege_ndpt  0
Aug 16 09:23:37 EPG sm-notify[3038]: Version 1.2.3 starting
Aug 16 09:23:37 EPG kernel: [   24.118213] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Aug 16 09:23:38 EPG mcelog: Unsupported new Family 6 Model 3e CPU: only decoding architectural errors
Aug 16 09:23:38 EPG mcelog: mcelog read: No such device
Aug 16 09:23:38 EPG kernel: [   25.022571] tg3 0000:01:00.0: em1: Link is up at 1000 Mbps, full duplex
Aug 16 09:23:38 EPG kernel: [   25.022577] tg3 0000:01:00.0: em1: Flow control is off for TX and off for RX
Aug 16 09:23:38 EPG kernel: [   25.022580] tg3 0000:01:00.0: em1: EEE is disabled
Aug 16 09:23:38 EPG kernel: [   25.024565] ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
Aug 16 09:23:38 EPG sshd[3489]: Server listening on 0.0.0.0 port 22.
Aug 16 09:23:38 EPG sshd[3489]: Server listening on :: port 22.
Aug 16 09:23:41 EPG logger: /etc/init.d/xdm: No changes for /etc/X11/xdm/Xservers
Aug 16 09:23:41 EPG logger: /etc/init.d/xdm: No changes for /etc/X11/xdm/xdm-config
Aug 16 09:23:41 EPG /usr/sbin/cron[3888]: (CRON) STARTUP (V5.0)
Aug 16 09:23:42 EPG smartd[3902]: smartd 5.39 2008-10-24 22:33 [x86_64-suse-linux-gnu] (openSUSE RPM) Copyright (C) 2002-8 by Bruce Allen, http:   smartmontools.sourceforge.net
Aug 16 09:23:42 EPG smartd[3902]: Opened configuration file /etc/smartd.conf
Aug 16 09:23:42 EPG smartd[3902]: Drive: DEVICESCAN, implied '-a' Directive on line 26 of file /etc/smartd.conf
Aug 16 09:23:42 EPG smartd[3902]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
Aug 16 09:23:42 EPG smartd[3902]: Device: /dev/sda, opened
Aug 16 09:23:42 EPG smartd[3902]: Device: /dev/sda, IE (SMART) not enabled, skip device Try 'smartctl -s on /dev/sda' to turn on SMART features
Aug 16 09:23:42 EPG smartd[3902]: Unable to monitor any SMART enabled devices. Try debug (-d) option. Exiting...
Aug 16 09:23:46 EPG gdm-simple-greeter[3984]: GLib-GObject-CRITICAL: g_param_spec_flags: assertion `G_TYPE_IS_FLAGS (flags_type)' failed
Aug 16 09:23:46 EPG gdm-simple-greeter[3984]: GLib-GObject-CRITICAL: g_object_class_install_property: assertion `G_IS_PARAM_SPEC (pspec)' failed
Aug 16 09:23:48 EPG kernel: [   35.029532] em1: no IPv6 routers present
Aug 16 09:23:57 EPG sshd[3995]: Accepted keyboard-interactive/pam for root from 10.61.2.148 port 63845 ssh2
Aug 16 09:23:57 EPG sshd[3995]: subsystem request for sftp
Aug 16 09:24:01 EPG /usr/sbin/cron[4070]: (root) CMD (/home/zxin10/task/epgmonitor.sh )
Aug 16 09:24:01 EPG /usr/sbin/cron[4073]: (root) CMD (/home/zxagent/bin/watch_devcomm.sh >/dev/null 2>&1)
Aug 16 09:24:01 EPG /usr/sbin/cron[4071]: (root) CMD (/home/zxin10/was/script/starttop.sh)
Aug 16 09:24:01 EPG /usr/sbin/cron[4072]: (root) CMD (/home/zxin10/task/cpuio_stat.sh >/dev/null 2>&1)
Aug 16 09:24:01 EPG /usr/sbin/cron[4074]: (root) CMD (/home/zxin10/was/script/task_perf21.sh)
Aug 16 09:24:01 EPG /usr/sbin/cron[4075]: (root) CMD (/home/zxin10/task/deal_longquery.sh >/dev/null 2>&1)

shi_shijun

楼上是服务器重启后messages 日志里倒数三百行的日志信息。

shi_shijun

......

vaalhaai29

解决了吗？老弟