免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
最近访问板块 发新帖
查看: 975 | 回复: 2
打印 上一主题 下一主题

[系统管理] 【疑难求助】新装系统安装FC卡后没有相应目录 [复制链接]

论坛徽章:
0
跳转到指定楼层
1 [收藏(0)] [报告]
发表于 2017-02-23 11:43 |只看该作者 |倒序浏览
本帖最后由 g.ma 于 2017-02-23 11:43 编辑

各位好,这两天在安装Linux环境时遇到一个困难,向大家求助,多谢了 【抱拳】【抱拳】

近日一台 x3650服务器,重装Linux系统,完全清空重装的,安装两块QLogic QLE2460HBA光纤通道卡
安装驱动显示安装成功,但在 /sys/class/ 下没有fc_host fc_remote_ports fc_transport这三个目录

因为阵列和光纤交换机不在手边,没有接线

请问大概的原因是什么?有什么可以尝试的操作可以使这几个目录出现吗?非常感谢。

[root@localhost class]# lspci | grep -i fibre
07:00.0 Fibre Channel: QLogic Corp. ISP2432-based 4Gb Fibre Channel to PCI Express HBA (rev 03)
10:00.0 Fibre Channel: QLogic Corp. ISP2432-based 4Gb Fibre Channel to PCI Express HBA (rev 03)
[root@localhost class]# lsmod | grep qla
qla2xxx              1022636  0
scsi_mod              188665  5 sg,libata,aacraid,qla2xxx,sd_mod
qla2xxx_conf          334984  1
intermodule            37508  2 qla2xxx,qla2xxx_conf
[root@localhost class]# cd /sys/class
[root@localhost class]# ls
backlight  dma       i2c-adapter  mem   net            printer  scsi_device   scsi_host   usb_endpoint  vtconsole
bluetooth  firmware  input        misc  pci_bus        qla2xxx  scsi_disk     tty         usb_host
cpuid      graphics  leds         msr   pcmcia_socket  raw      scsi_generic  usb_device  vc
[root@localhost class]# cd fc_host
-bash: cd: fc_host: No such file or directory
[root@localhost class]#

论坛徽章:
0
2 [报告]
发表于 2017-02-23 11:49 |只看该作者
[root@localhost class]# cd /proc/scsi/qla2xxx
[root@localhost qla2xxx]# cat 0
QLogic PCI to Fibre Channel Host Adapter for QLE2460:
        Firmware version 4.06.03 [IP] [84XX] , Driver version 8.02.23
BIOS version 1.28
FCODE version 1.24
EFI version 1.08
Flash FW version 4.00.26 0002
ISP: ISP2432, Serial# RFC1001S57702
Request Queue = 0xc3dc80000, Response Queue = 0xc3e220000
Request Queue count = 4096, Response Queue count = 512
Total number of active commands = 0
Total number of interrupts = 4365
    Device queue depth = 0x10
Number of free request entries = 4095
Number of mailbox timeouts = 0
Number of ISP aborts = 0
Number of loop resyncs = 0
Number of retries for empty slots = 0
Number of reqs in pending_q= 0, retry_q= 0, done_q= 0, scsi_retry_q= 0
Host adapter:loop state = <DEAD>, flags = 0x5a03
Dpc flags = 0x4000000
MBX flags = 0x0
Link down Timeout = 030
Port down retry = 030
Login retry count = 030
Commands retried with dropped frame(s) = 0
Product ID = 0000 0000 0000 0000


SCSI Device Information:
scsi-qla0-adapter-node=2000001b329ca658;
scsi-qla0-adapter-port=2100001b329ca658;

FC Port Information:

SCSI LUN Information:
(Id:Lun)  * - indicates lun is not registered with the OS.
[root@localhost qla2xxx]#

论坛徽章:
0
3 [报告]
发表于 2017-03-06 20:53 |只看该作者
补充一下,又安装了另一台服务器,硬件配置完全一样,一样的redhat版本,一样的hba卡,刚装完系统后,/sys/class/ 下的目录都是有的,安装完驱动程序后/sys/class/ 下的目录就不见了
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP