- 论坛徽章:
- 2
|
Update firmware via CLI
1. To load the Oracle ILOM firmware image using the CLI, issue the load -source command followed by the path to locate the firmware image you want to install.
For example:
load -source protocol://username:password@server_ip/<path_to_image>/<image.pkg>
Where the protocol can be: http, https, ftp, tftp, sftp, scp
A series of prompts appear.
2. Type y to load the image file, then type y to enable the applicable options:
Preserve Configuration – Enable this option to save and restore the existing Oracle ILOM firmware settings after the firmware update is complete. For further details **ut this option, see Preserve Oracle ILOM Configuration .
Note. All firmware update options presented for your server are enabled (y) by default when using a script (-script) to perform the firmware update.
3. Oracle ILOM displays a status message when the firmware process is complete.The system will either reboot or power-off to apply the new firmware image. |
|