今天第一天上班，很受压。。。。。。

lili1111

原帖由 "shmilyxyh" 发表：
简单啊 ！一路 ？  加上一个 金山快译。。

你在哪的网通？我有机会看看你 呵呵～

上海的,"shmilyxyh"你呢?

flighttop

Go to Cisco web site and find appropriate documentations. Read through them and you will be fine. It is seldom to create a new vlan or a subnetwork. Troubleshooting is daily tasks. If you need to add a new vlan, telnet to the router and you will be in user mode. In the user mode you only can show the configuration of the router. If you want to set up a new vlan or modify the configuration, you need to enter enable and config mode. You might need different password for entering enable and config mode. In the config mode you can set up a new vlan using only two commands, which can be found in the documentation. When you need to do this, come here and we can give you more advice.
Don't worry and work hard!

lili1111

flighttop,thank you for your reply.
I would try my best with my work.
Best regards!!!

lili1111

哎......
明晚就要加班了,真难过.

wenhao_gao

i am a cai niao too, i will get a new job next week that majors in system integrations , i know little about it....
      

icebreak

是啊，多动手，逐渐的你就成了高手了

shakesky

我们公司帮网通维护设备，发现那的技术人员水平非常一般，理论知识比较差，你不用怕，水平都差不多，只要你多学习和实践，会成为专家的

lili1111

现在就在值班，太无聊了，晚上根本学不到什么东西，身体也吃不消。
能告诉我你们在处于一个新手的情况下，怎么去学东西，怎么去提高的？
有哪些方法能在CISCO和SOLARIS技术方面有所提高呢？？？？？？？
先谢谢啦！     

永远の蓝精灵

试着找回高考那时候的冲劲吧
我现在正在试着找回那个时候的自己
那个时候真的是什么也不怕，相信自己努力就一定成功
可是现在。。。

seven007

努力