关于cisco2600的dhcp和dns的疑惑

saintjian

我的2600，双以太口，想打开DHCP和DNS功能，不知怎么做？是不是这种机型不支持这两个功能？

oppenheimar

ip dhcp exceed－address
ip dhcp pool pool－name

saintjian

原帖由 "oppenheimar" 发表：
ip dhcp exceed－address
ip dhcp pool pool－name

这是我的机器的一些信息，刚才试了一下，还是不行，请祥解
yancaodasha#
yancaodasha#show version
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-I-M), Version 11.3(10)T,  RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Tue 01-Jun-99 17:16 by pwade
Image text-base: 0x80008084, data-base: 0x80566960

ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)

yancaodasha uptime is 17 minutes
System restarted by power-on
System image file is "flash:c2600-i-mz.113-10.bin", booted via flash

cisco 2611 (MPC860) processor (revision 0x203) with 26624K/6144K bytes of memory.
Processor board ID JAD043105GZ (3416308134)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
2 Ethernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)

Configuration register is 0x210F
--More--         
yancaodasha#
yancaodasha#
yancaodasha#
yancaodasha#
yancaodasha#
yancaodasha#
yancaodasha#
yancaodasha#
yancaodasha#conf terminal
Enter configuration commands, one per line.  End with CNTL/Z.
yancaodasha(config)#ip dhcp ?
  Hostname or A.B.C.D  IP address or Name of DHCP server

yancaodasha(config)#ip dhcp ip dhcp 172.168.0.1
Translating "ip"...domain server (255.255.255.255)
                            ^
% Invalid input detected at '^' marker.

yancaodasha(config)#ip dhcp 172.168.0.1
yancaodasha(config)#

saintjian

我的机器前些日子系统文件被erease了，用“c2600-i-mz.113-10.bin”恢复的，不知道跟这个有没有关系。

cdzy777

upgrade IOS!!!! mabye!