Cisco2600升级IOS时遇到的一个问题

leslie_sheng

这是一个我跟mentor去给 Cisco2600升级IOS时遇到的一个问题,共享给大家。
1，给笔记本配置和CISCO相同网段的IP，连接到CISCO；
2，Use TFTP server backup the configuration；
   #copy running-config tftp   ***用text格式打开此文件检查配置是否正确***
3，#copy tftp flash
     Address or name of remote host []? 10.10.10.2 ***笔记本IP***
     Source filename []? c2600?i?mz.121?14.bin
     Destination filename [c2600?i?mz.121?14.bin]?y
     Accessing tftp://10.10.10.2/c2600?i?mz.121?14.bin...
     Erase flash: before copying? [confirm]y
     Erasing the flash filesystem will remove all files! Continue? [confirm]y
Erasing device... eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeee ...erased
Erase of flash: complete
Loading c2600?i?mz.121?14.bin from 10.10.10.2 (via Ethernet0/0): !!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!
***%SYS-2-MALLOCFAIL: Memory allocation of 32 bytes failed from 0x8034A70C, alignment 0
Pool: Processor  Free: 0  Cause: Not enough free memory
Alternate Pool: None  Free: 0  Cause: No Alternate pool ***失败
4，关机，插拔一下电源线。
5，开机，自动flash ok.

jf408

是升级后的版本吗

gyog

查一下
flash和dram多大