[求助]总是出现sysplanar0错误

浪子是我

maybe the power cord un-plug before , try to remove the diagnostic of the powerfail in crontab ,
run
#crontab -e

(remove the line of powerfail )

浪子是我

[quote]原帖由 "livefordie"]楼上的，你说的与他的问题无关，那个错是每天报一次，而且是整点报，扯远了。试过微码升级吗？没头绪。[/quote 发表：


livefordie, do you know ????? if the power cord unplug before, the crontab will be added a diagnostic of the power test in this file , and the cronjob will be run each day . 微码升级? 扯远了 !!

newmax

这个是其中的内容
# SSA warning : Deleting the next line may allow enclosure hardware errors to go
undetected
30 * * * * /usr/lpp/diagnostics/bin/run_ssa_encl_healthcheck 1>;/dev/null 2>;/dev/
null
# SSA warning : Deleting the next line may allow link speed exceptions to go und
etected
30 4 * * * /usr/lpp/diagnostics/bin/run_ssa_link_speed 1>;/dev/null 2>;/dev/null
0 00,12 * * * wall%rc.powerfail:2::WARNING!!! The system is now operating with a
power problem.  This message will be walled every 12 hours. Remove this crontab
entry after the         problem is resolved.
~
~
~
~
~
~
~
~
~
~
~
~
~
"/tmp/crontabmDqSEa" 5 lines, 543 characters

是不是将0 00,12 后面有关电源的部分都删掉呢？

浪子是我

remove the following line in crontab :

0 00,12 * * * wall%rc.powerfail:2::WARNING!!! The system is now operating with a
power problem. This message will be walled every 12 hours. Remove this crontab
entry after the problem is resolved.

newmax

已经删掉了，还没有报错。希望老天保佑，不要再出问题。另外多问一句，电源是不是有问题呢？为什么会报错？总是不放心，怕留下隐患。

wozxz

如果问题没有解决，只删除没有用，还是会报错的。
用diag看看。。。。

纳闷

首先确认一下,你用的机器型号是否是F80,F85,或者就是叫p620
从描述信息看，620的电源模块是双电源但是只有一个电源接头，检查一下两个电源模块绿色的LED是否有闪烁，该款机型在一个电源出现问题以后，不一定会在errpt中报错，但是会在mail中有错误设备的FRU号，可以正常工作，但是重新启动有时候会起不起来
另外机器在升过firmware后，有些批次的机器会报内存错误而无法正常引导，建议让ibm给你更换错误的内存模块

emczhang

我们这里的p690这是经常报这个错误，升级微码后还是这个样子，真是郁闷。

newmax

我的机器是F85，没有升级firmware。电源的LED也不闪。我看过了Mail，在里面每天凌晨4点左右都会有报错，反复出现的有三个FRU，具体是什么设备还要去查查看（机器托管在外面）。主要问题如下：
Subject: diagela message from server

A PROBLEM WAS DETECTED ON Tue Dec 14 04:00:33 BEIST 2004                  801014

The Service Request Number(s)/Probable Cause(s)
(causes are listed in descending order of probability):

  A05-160: System shutdown due to internal power supply failure
           Error log information:
                 Sequence number: 1237
    n/a              FRU:  97***24             V1              
-------------------------------------------------------------------------------------
Subject: diagela message from server

A PROBLEM WAS DETECTED ON Wed Dec  8 04:01:06 BEIST 2004                  801014

The Service Request Number(s)/Probable Cause(s)
(causes are listed in descending order of probability):

  651-880: The CEC or SPCN reported an error. Report the SRN and the
           following reference and physical location codes to your service
           provider.
           Error log information:
                 Sequence number: 1223
    Ref. Code: 10111520 FRU:  52***30         V2              

  651-881: The CEC or SPCN reported an error. Report the SRN and the
           following reference and physical location codes to your service
           provider.
           Error log information:
                 Sequence number: 1217
    Ref. Code: B1194690 FRU: n/a              n/a
-------------------------------------------------------------------------------------
Subject: diagela message from server

A PROBLEM WAS DETECTED ON Tue Dec  7 04:01:08 BEIST 2004                  801014

The Service Request Number(s)/Probable Cause(s)
(causes are listed in descending order of probability):

  651-880: The CEC or SPCN reported an error. Report the SRN and the
           following reference and physical location codes to your service
           provider.
           Error log information:
                 Sequence number: 1223
    Ref. Code: 10111520 FRU:  53***30         V2              

  651-881: The CEC or SPCN reported an error. Report the SRN and the
           following reference and physical location codes to your service
           provider.
           Error log information:
                 Sequence number: 1217
    Ref. Code: B1194690 FRU: n/a              n/a            

  A05-160: System shutdown due to internal power supply failure
           Error log information:
                 Sequence number: 1214
    n/a              FRU:  97***24             V1              

  651-882: The CEC or SPCN reported an error. Report the SRN and the
           following reference and physical location codes to your service
           provider.
           Error log information:
                 Sequence number: 1208
    Ref. Code: 450B288D FRU:  53***06         P1-M1           

-------------------------------------------------------------------------------------
Subject: diagela message from server

A PROBLEM WAS DETECTED ON Mon Dec  6 04:01:06 BEIST 2004                  801014

The Service Request Number(s)/Probable Cause(s)
(causes are listed in descending order of probability):

  651-880: The CEC or SPCN reported an error. Report the SRN and the
           following reference and physical location codes to your service
           provider.
           Error log information:
                 Sequence number: 1223
    Ref. Code: 10111520 FRU:  53***30         V2              

  651-881: The CEC or SPCN reported an error. Report the SRN and the
           following reference and physical location codes to your service
           provider.
           Error log information:
                 Sequence number: 1217
    Ref. Code: B1194690 FRU: n/a              n/a            

  A05-160: System shutdown due to internal power supply failure
           Error log information:
                 Sequence number: 1202
    n/a              FRU:  97***24             V1              

  651-882: The CEC or SPCN reported an error. Report the SRN and the
           following reference and physical location codes to your service
           provider.
           Error log information:
                 Sequence number: 1208
    Ref. Code: 450B288D FRU:  53***06         P1-M1           

  652-883: The CEC or SPCN reported a non-critical error. Report the SRN
           and the following reference and physical location codes to your
           service provider.
           Error log information:
                 Sequence number: 1200
    Ref. Code: 4507300E FRU: n/a              P1-M1.4      
-------------------------------------------------------------------------------------
Subject: diagela message from oaserver

A PROBLEM WAS DETECTED ON Sun Dec  5 04:01:17 BEIST 2004                  801014

The Service Request Number(s)/Probable Cause(s)
(causes are listed in descending order of probability):

  651-880: The CEC or SPCN reported an error. Report the SRN and the
           following reference and physical location codes to your service
           provider.
           Error log information:
                 Sequence number: 1223
    Ref. Code: 10111520 FRU:  53***30         V2              

  651-881: The CEC or SPCN reported an error. Report the SRN and the
           following reference and physical location codes to your service
           provider.
           Error log information:
                 Sequence number: 1217
    Ref. Code: B1194690 FRU: n/a              n/a            

  A05-160: System shutdown due to internal power supply failure
           Error log information:
                 Sequence number: 1202
    n/a              FRU:  97***24             V1              

  651-882: The CEC or SPCN reported an error. Report the SRN and the
           following reference and physical location codes to your service
           provider.
           Error log information:
                 Sequence number: 1208
    Ref. Code: 450B288D FRU:  53***06         P1-M1           

  652-883: The CEC or SPCN reported a non-critical error. Report the SRN
           and the following reference and physical location codes to your
           service provider.
           Error log information:
                 Sequence number: 1200
    Ref. Code: 4507300E FRU: n/a              P1-M1.4         

  652-884: The CEC or SPCN reported a non-critical error. Report the SRN
           and the following reference and physical location codes to your
           service provider.
           Error log information:
                 Sequence number: 1199
    Ref. Code: 4507300C FRU: 00********06     P1-M1.2         


挑了几个有代表性的。请各位指点