NBU在WINDOWS群集上的报错，请高手帮帮忙

pkgadd

硬件环境是：
SUN fire V40z，
WINDOWS2000 Advanced Server群集，
数据库是SQL Server 2000，
存储阵列是Teamax，
带库是adic的FastStor2。

两个节点名字分别是：lims-1和lims-2
群集名字是：lims
SQL的名字是：limssql

由于方案的问题，带库只能连接在一台服务器上，我安装NBU5.0时没有按照群集安装，而是使用本地安装。安装后用sql agent生成一个test.bch，内容如下：
OPERATION BACKUP
DATABASE $ALL
SQLHOST "LIMSSQL"
NBSERVER "LIMS-1"
MAXTRANSFERSIZE 0
BLOCKSIZE 7
POLICY sql
BROWSECLIENT "LIMSSQL"
ENDOPER TRUE

storage unit和volume pool的配置没有问题，policy的配置如下：
  attributes：
policy type：MS-SQL-Server
  Clients：
Client name：lims-1
Client hardware：PC
Operating system：WIN2000
  Backup selection：
C:\program files\veritas\test.bch

现在的问题是使用policy的manual backup出错，报错code 12。
内容如下：
detailed status:
2004-12-10 16:37:17 - Critical bpbrm(pid=1876) from client lims: FTL - Progress log <\>; open

failed - No such file or directory
2004-12-10 16:37:17 - started process bpbrm (1876)
2004-12-10 16:37:17 - connecting
2004-12-10 16:37:17 - connected; connect time: 00:00:00
2004-12-10 16:37:17 - end writing
file open failed(12)
2004-12-10 16:37:17 - Error bpsched(pid=3020) suspending further backup attempts for client

lims, policy test, schedule mssql because it has exceeded the configured number of tries
2004-12-10 16:37:17 - Error bpsched(pid=3020) backup of client lims exited with status 12

(file open failed)


status code 12
trouble shooter:
Try the following:*  For NetBackup Advanced Client only:   Status code 12 may appear in the

/usr/openv/netbackup/logs/bptm or bpdm log, accompanied by the following:tpc_read_config

failed: cannot open file/usr/openv/volmgr/database/3pc.conf   This may indicate that the

policy is configured with either NetBackup Media Server or Third-Party Copy Device as the

offhost backup method, but that the 3pc.conf file does not exist or is in the wrong

location. For instructions on creating the 3pc.conf file, refer to the latest version of the

NetBackup Advanced Client System Administrator's Guide.*  For a FlashBackup policy, if the

CACHE= entry follows the source data entry (the entry for the data to back up), the backup

will fail with status code 12. Messages such as the following will appear in the

/usr/openv/netbackup/logs/bpbkar logs on the client09:55:33.941 [6092] <16>; bpfsmap: ERR -

open_snapdisk: NBU snapshot enable failed error 309:55:33.942 [6092] <32>; bpfsmap: FTL -

bpfsmap: can't open snapshot disk /dev/rdsk/c4t1d0s3 errno 009:55:33.950 [6092] <16>; bpbkar

Exit: ERR - bpbkar FATAL exit status = 12: file open failed09:55:33.956 [6092] <4>; bpbkar

Exit: INF - EXIT STATUS 12: file open failed09:55:33.957 [6092] <2>; bpbkar Exit: INF - Close

of stdout complete   Change the order of the Backup Selections list so that the CACHE entry

precedes the source data entry. (The source data entry specifies the raw partition

containing the file system to be backed up.)*  Check the NetBackup Problems report. Try to

determine the file and why the error occurred. A possible cause is a permission problem with

the file. For detailed troubleshooting information, create a debug log directory for the

process that returned this status code. Then, retry the operation, and check the resulting

debug log.

请高手不惜赐教，小弟感激不尽

pkgadd

NBU5.0

pkgadd

up

liumaolin1979

在介质服务器上先用MS SQL Agent连接一下，自动生成一个备份脚本，把备份脚本放置在共享磁盘阵列上。再使用虚拟的机器名去建立一个policy,测试一下。

老邱

先在client执行这个备份试试

zhangyan_ou

To configure NetBackup Server to be aware of clustered SQL Server instances
1. Using the NetBackup Administration Console, create a MS-SQL-Server policy (for
example, VIRTSQLPOLICY), to specify the storage attributes of the backup. Set up the
following attributes:
a. Policy-storage unit: Specify a storage unit belonging to the storage group
intended for backup. If you are using a virtual media server, then specify a
storage unit belonging to the virtual media server.
b. Create a backup policy schedule for VIRTSQLPOLICY.
c. Add the virtual SQL Server name (VIRTUALSERVER) to the client list.
2. To incorporate SQL Server backup scheduling, create an automatic schedule in the
VIRTSQLPOLICY. Create the automatic schedule as follows:
a. Add an automatic backup schedule to VIRTSQLPOLICY.
b. Add one or more script names (batch files) to the file list.
3. Create a standard backup policy (say, STDPOLICY). Add all physical names in the
cluster to the client list of STDPOLICY.
4. Establish the permissions settings as follows for a redirected restore to a different
client: On the master server, either:
◆ Create a file called
install_path\NetBackup\db\altnames\No.Restrictions
or
◆ Create each of the files, install_path\NetBackup\db\altnames\NODEA,
install_path\NetBackup\db\altnames\NODEB.
—————————————————————————————————
Note Creating the No.Restrictions file allows all clients to perform redirected
restores to different clients. This parameter may need to be added and removed
according to site policies.
————————————————————————————————
Performing a Backup on a Virtual SQL Server Instance