5.3安装以后网卡不工作

quake_3

信息我忘记拷贝了，从ifconfig的输出是正常的，nc6770的1000M网卡，硬件手册显示为兼容支持的，安装后为bge0，但是就是不通。（网络和硬件是没有任何问题）。

希望有经验的高手看看。

wolfop

记得bge的网卡在freebsd需要手工设置速度，不能自动协商。

Ecore

如何指定ip地址,在哪些文件中配置?

quake_3

ifconfig中的输出为1000baseSX ，是不是需要手工设定为1000baseTX，还是其他的地方呀。

剑心通明

应该是TX吧，bge的网卡是哪种网卡？偶就用过8139、3com、intel的

quake_3

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE #0: Fri Nov 5 04:19:18 UTC 2004
root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
MPTable: <COMPAQ PROLIANT >;
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) MP CPU 2.20GHz (2199.93-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf26 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>;
Hyperthreading: 2 logical CPUs
real memory = 2147450880 (2047 MB)
avail memory = 2095976448 (1998 MB)
ioapic0: Assuming intbase of 0
ioapic1: Assuming intbase of 16
ioapic2: Assuming intbase of 32
ioapic3: Assuming intbase of 48
ioapic0 <Version 1.1>; irqs 0-15 on motherboard
ioapic1 <Version 1.1>; irqs 16-31 on motherboard
ioapic2 <Version 1.1>; irqs 32-47 on motherboard
ioapic3 <Version 1.1>; irqs 48-63 on motherboard
npx0: [FAST]
npx0: <math processor>; on motherboard
npx0: INT 16 interface
pcib0: <MPTable Host-PCI bridge>; pcibus 0 on motherboard
pci0: <CI bus>; on pcib0
pci0: <base peripheral>; at device 2.0 (no driver attached)
pci0: <display, VGA>; at device 3.0 (no driver attached)
fxp0: <Intel 82559 Pro/100 Ethernet>; port 0x2800-0x283f mem 0xe9e00000-0xe9efffff,0xe9fe0000-0xe9fe0fff irq 29 at device 4.0 on pci0
miibus0: <MII bus>; on fxp0
inphy0: <i82555 10/100 media interface>; on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:0e:7f:24:a6:95
ahc0: <Adaptec (Compaq OEM) 3960D Ultra160 SCSI adapter>; port 0x2c00-0x2cff mem 0xe9df0000-0xe9df0fff irq 30 at device 5.0 on pci0
ahc0: [GIANT-LOCKED]
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec (Compaq OEM) 3960D Ultra160 SCSI adapter>; port 0x3000-0x30ff mem 0xe9de0000-0xe9de0fff irq 31 at device 5.1 on pci0
ahc1: [GIANT-LOCKED]
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
isab0: <CI-ISA bridge>; at device 15.0 on pci0
isa0: <ISA bus>; on isab0
atapci0: <ServerWorks CSB5 UDMA100 controller>; port 0x2000-0x200f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
ohci0: <OHCI (generic) USB controller>; mem 0xe9dd0000-0xe9dd0fff irq 10 at device 15.2 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller>; on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib1: <MPTable Host-PCI bridge>; pcibus 1 on motherboard
pci1: <CI bus>; on pcib1
ciss0: <HP Smart Array 642>; port 0x4000-0x40ff mem 0xf0580000-0xf05bffff,0xf05f0000-0xf05f1fff irq 18 at device 2.0 on pci1
ciss0: [GIANT-LOCKED]
pci1: <base peripheral>; at device 30.0 (no driver attached)
pcib9: <MPTable Host-PCI bridge>; pcibus 9 on motherboard
pci9: <CI bus>; on pcib9
pcib255: <ServerWorks CMIC-HE host to PCI-X bridge>; pcibus 255 on motherboard
pci255: <CI bus>; on pcib255
pcib3: <ServerWorks host to PCI bridge>; pcibus 3 on motherboard
pci3: <CI bus>; on pcib3
pcib5: <MPTable Host-PCI bridge>; pcibus 5 on motherboard
pci5: <CI bus>; on pcib5
pci5: <base peripheral>; at device 30.0 (no driver attached)
pcib13: <MPTable Host-PCI bridge>; pcibus 13 on motherboard
pci13: <CI bus>; on pcib13
bge0: <Broadcom BCM5701 Gigabit Ethernet, ASIC rev. 0x105>; mem 0xf7ff0000-0xf7ffffff irq 32 at device 1.0 on pci13
bge0: Ethernet address: 00:08:02:28:d9:9b
cpu0 on motherboard
eisa0: <EISA bus>; on motherboard
mainboard0: <CPQ071b (System Board)>; on eisa0 slot 0
eisa0: unknown card @@@00ff (0x000000ff) at slot 2
orm0: <ISA Option ROMs>; at iomem 0xee000-0xeffff,0xcd800-0xcefff,0xcc000-0xcd7ff,0xc8000-0xcbfff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)>; at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard>; irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <S/2 Mouse>; irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller>; at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive>; on fdc0 drive 0
ppc0: <arallel port>; at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus>; on ppc0
plip0: <PLIP network interface>; on ppbus0
lpt0: <Printer>; on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O>; on ppbus0
sc0: <System console>; at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>;
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA>; at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2199932628 Hz quality 800
Timecounters tick every 10.000 msec
acd0: CDROM <SAMSUNG CD-ROM SC-148A/B409>; at ata0-master PIO4
Waiting 15 seconds for SCSI devices to settle
pass0 at ahc1 bus 0 target 15 lun 0
pass0: <COMPAQ PROLIANT 4L6I 1.86>; Fixed Processor SCSI-2 device
pass0: 3.300MB/s transfers
da0 at ciss0 bus 0 target 0 lun 0
da0: <COMPAQ RAID 5 VOLUME OK>; Fixed Direct Access SCSI-0 device
da0: 135.168MB/s transfers
da0: 420027MB (860216490 512 byte sectors: 255H 63S/T 53546C)
Mounting root from ufs:/dev/da0s1a
WARNING: / was not properly dismounted
WARNING: /home was not properly dismounted
/home: superblock summary recomputed
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
WARNING: /var/tmp was not properly dismounted
/var/tmp: mount pending error: blocks 4 files 1
/var/tmp: superblock summary recomputed
bge0: gigabit link up

quake_3

fxp0: flags=8802<BROADCAST,SIMPLEX,MULTICAST>; mtu 1500
options=8<VLAN_MTU>;
ether 00:0e:7f:24:a6:95
media: Ethernet autoselect (none)
status: no carrier
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST>; mtu 1500
options=1a<TXCSUM,VLAN_MTU,VLAN_HWTAGGING>;
inet 25.20.160.26 netmask 0xffffff80 broadcast 25.20.160.127
inet6 fe80::208:2ff:fe28:d99b%bge0 prefixlen 64 scopeid 0x2
ether 00:08:02:28:d9:9b
media: Ethernet autoselect (1000baseSX <full-duplex>
status: active
plip0: flags=108810<OINTOPOINT,SIMPLEX,MULTICAST>; mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST>; mtu 16384
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4