- 论坛徽章:
- 0
|
新安装的网卡:
# ifconfig -a
lo0 :flags=100841 <up ,loopback,running ,multicast ,ipv4>;mtu 8232 index1
inet 127.0.0.1 netmask ff000000
rtls0:flags=100851<up ,pointop0int ,running ,multicast ,ipv4>;mtu 1500 index2
inet 192.168.0.20->;127.0.0.1 netmask ffffff00
ether 0:e0:4c:e0:0:7
所以ping别的同网段机子都不通,只能ping通自己。
我想要把pointopoint flag去掉:
# ifconfig rtls0 pointopoint
提示“pointopoint错误地址!”,这个命令(没加IP地址)应该会清除pointopoint flag的啊。
# ifconfig rtls0 broadcast 192.168.0.255
提示“ifconfig slocsliFBROADDR :RTLS0:cannot assign requested address”
我换另一块网卡,驱动安装后也是pointopoint.
这是为什么呢?应该怎么改呢?谢谢! |
|