哈兄请再进来，mplayer-skins装不上

memoza

>;>; Checksum OK for mplayer/default-1.7.tar.bz2.
>;>; Checksum OK for mplayer/AlienMind-1.0.tar.bz2.
>;>; Checksum OK for mplayer/avifile-1.5.tar.bz2.
>;>; Checksum OK for mplayer/BlueHeart-1.4.tar.bz2.
>;>; Checksum OK for mplayer/CornerMP-1.0.tar.bz2.
>;>; Checksum OK for mplayer/CornerMP-aqua-1.0.tar.bz2.
>;>; Checksum OK for mplayer/Cyrus-1.0.tar.bz2.
>;>; Checksum OK for mplayer/gnome-1.1.tar.bz2.
>;>; Checksum OK for mplayer/hayraphon-1.0.tar.bz2.
>;>; Checksum OK for mplayer/hwswskin-1.0.tar.bz2.
>;>; Checksum OK for mplayer/mentalic-1.1.tar.bz2.
>;>; Checksum OK for mplayer/MidnightLove-1.5.tar.bz2.
>;>; Checksum OK for mplayer/neutron-1.4.tar.bz2.
>;>; Checksum OK for mplayer/phony-1.0.tar.bz2.
>;>; Checksum OK for mplayer/plastic-1.1.1.tar.bz2.
>;>; Checksum OK for mplayer/proton-1.1.tar.bz2.
>;>; Checksum OK for mplayer/slim-1.0.tar.bz2.
>;>; Checksum OK for mplayer/trium-1.0.tar.bz2.
>;>; Checksum OK for mplayer/WindowsMediaPlayer6-1.2.tar.bz2.
>;>; Checksum OK for mplayer/xanim-1.5.tar.bz2.
>;>; Checksum OK for mplayer/xine-lcd-1.0.tar.bz2.
>;>; Checksum mismatch for mplayer/mini.tar.bz2.
Make sure the Makefile and distinfo file (/usr/ports/multimedia/mplayer-skins/distinfo)
are up to date.  If you are absolutely sure you want to override this
check, type "make NO_CHECKSUM=yes [other args]".
*** Error code 1

Stop in /usr/ports/multimedia/mplayer-skins.
*** Error code 1

Stop in /usr/ports/multimedia/mplayer-skins.
#

照老办法：rm /usr/ports/distfiles/mplayer/mini.tar.bz2

再执行安装，可是每次都出相同的错误，
可是我的ports才升级的呀。

把你的Makefile发给我吧：caac200@hotmail.com

statue

try to get mplayer/mini.tar.bz2 from another site?

哈蜜瓜

不选择mini.tar.bz2的skin

memoza

[quote]原帖由 "statue"]try to get mplayer/mini.tar.bz2 from another site?[/quote 发表：


好，那我只有试用google搜索手工下载了。

不选择mini.tar.bz2的skin

我每次选的是default，可还是出这个问题。

l63

make NO_CHECKSUM=yes；


我试过了；

quakelee

我曾经有段时间所有的skin都mismatch了，没关系的，用楼上的方法就解决了

memoza

make NO_CHECKSUM=yes install clean
还是不行,郁闷。

# gmplayer
Using GNU internationalization
Original domain: messages
Original dirname: /usr/local/share/locale
Current domain: mplayer
Current dirname: /usr/local/share/locale


MPlayer 0.90rc5-2.95.4 (C) 2000-2003 Arpad Gereoffy (看DOCS!)

CPU: Advanced Micro Devices Athlon 4 PM Palomino/Athlon MP Multiprocessor/Athlon XP eXtreme Performance (Family: 6, Stepping: 2)
Detected cache-line size is 64 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 0 SSE2: 0
编译实时CPU检测 - 警告, 这不是最佳选择! 如果你想获得最佳的 表现, 加上--disable-runtime-cpudetection选项重新编译mplayer
Reading config file /usr/local/share/mplayer/mplayer.conf: No such file or directory
Reading config file /root/.mplayer/config
[cfg] read config file: /root/.mplayer/gui.conf
Reading config file /root/.mplayer/gui.conf: No such file or directory
vo: X11 running at 800x600 with depth 24 and 32 bpp (":0.0" =>; local display)
Disabling DPMS
Reading /root/.mplayer/codecs.conf: can't open '/root/.mplayer/codecs.conf': No such file or directory
Reading /usr/local/share/mplayer/codecs.conf: 50 audio & 136 video codecs
font: can't open file: /root/.mplayer/font/font.desc
font: can't open file: /usr/local/share/mplayer/font/font.desc
Using usleep() timing
Can't open input config file /root/.mplayer/input.conf : No such file or directory
Input config file /usr/local/share/mplayer/input.conf parsed : 52 binds
SKIN dir 1: '/root/.mplayer/Skin'
SKIN dir 2: '/usr/local/share/mplayer/Skin'
[skin] file ( /usr/local/share/mplayer/Skin/default/skin ) not found.
找不到Skin( default ).
# mplayer
Using GNU internationalization
Original domain: messages
Original dirname: /usr/local/share/locale
Current domain: mplayer
Current dirname: /usr/local/share/locale


MPlayer 0.90rc5-2.95.4 (C) 2000-2003 Arpad Gereoffy (看DOCS!)

CPU: Advanced Micro Devices Athlon 4 PM Palomino/Athlon MP Multiprocessor/Athlon XP eXtreme Performance (Family: 6, Stepping: 2)
Detected cache-line size is 64 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 0 SSE2: 0
编译实时CPU检测 - 警告, 这不是最佳选择! 如果你想获得最佳的 表现, 加上--disable-runtime-cpudetection选项重新编译mplayer
Reading config file /usr/local/share/mplayer/mplayer.conf: No such file or directory
Reading config file /root/.mplayer/config
Reading /root/.mplayer/codecs.conf: can't open '/root/.mplayer/codecs.conf': No such file or directory
Reading /usr/local/share/mplayer/codecs.conf: 50 audio & 136 video codecs
用法:   mplayer [options] [url|path/]filename

基本选项: (包括所有选项的详细列表参见manpage!)
-vo <drv[]>; 选择视频输出模式和设备(用'-vo help'查看列 表)
-ao <drv[]>; 选择音频输出模式和设备(用'-ao help'查看列 表)
-vcd <trackno>;  从设备而不是普通文件上播放VCD(video cd)track
-dvd <titleno>;  从设备而不是普通文件上播放DVD title/track
-alang/-slang   选择DVD音轨/字幕的语言(使用两位的国家代码)
-ss <timepos>;   寻找指定的(多少秒或hh:mm:ss)位置
-nosound        不播放声音
-fs -vm -zoom   全屏播放选项(fullscr,vidmode chg,softw.scale)
-x <x>; -y <y>;   设置播放的分辨率(用于改变vidmode或软件缩放)
-sub <file>;     指定使用的字幕文件(参见-subfps, -subdelay)
-playlist <file>; 指定使用播放列表文件
-vid x -aid y   选择用于播放的视频(x)和音频(y)流
-fps x -srate y 改变视频(x fps)和音频(y Hz)率
-pp <quality>;   使用后期处理滤镜(详细内容参见manpage/docs)
-framedrop      使用 frame-dropping (用于慢机器)

基本控制键: (完整的列表参见manpage, 同时也要检查一下 input.conf)
<-  or  ->;      向后/向前搜索10秒
up or down      向后/向前搜索1分钟
pgup or pgdown  向后/向前搜索10分钟
< or >;          跳到播放列表中的前一首/下一首
p or SPACE      暂停播放(按任意键继续)
q or ESC        停止播放并推出
+ or -          调整音频延迟+/-0.1秒
o               循环OSD模式:  none/seekbar/seekbar+timer
* or /          增加或减少pcm音量
z or x          调整字幕延迟+/-0.1秒
r or t          上/下调整字幕位置, 参见-vop expand !

* * * 详细内容，进一步(高级)的选项和控制键参见MANPAGE！* * *

#

哈蜜瓜

别管它！不装mplayer-skins ports也行！
把所有下载的skin包解压到 /usr/local/share/mplayer/Skins/下再运行
gmplayer
图形的GUI是否出来了？

jedi-k

mplayer不出界面的
用gmplayer就好了！

memoza

原帖由 "哈蜜瓜" 发表：
别管它！不装mplayer-skins ports也行！
把所有下载的skin包解压到 /usr/local/share/mplayer/Skins/下再运行
gmplayer
图形的GUI是否出来了？

图形出来了，可是出现乱码，删除中文字体，依旧是乱码尺。
想想看，还有什么办法。file:/root/snapshot1.png

这里怎么发图片啊。