- 论坛徽章:
- 0
|
可是本人的全称记录哦,想要的话,大家就给点支持呀,我可是第一次法帖哦,不是好东西,我是不会发的!!!!!!!
进入cm状态
[uninitialized] MP>; cm
Enter HE to get a list of available commands
用命令cc 进入复杂配置模式(complex configure)
[uninitialized] MP:CM>; cc
This command allows you to change the complex profile.
WARNING: You must either shut down the OSs for reconfiguration or
execute the RR (reset for reconfiguration) command for all
partitions before executing this command.
G - Build Genesis complex profile
L - Restore Last complex profile
Select profile to build or restore: g
The genesis complex profile creates one single cell partition.
WARNING: The genesis complex profile automatically ENABLES partition
reconfiguration. This allows partitions to issue platform
reconfiguration commands that could affect other partitions.
Use the PARPERM command to disable partition reconfiguration.
Choose the cell to use.
Enter cell number: 0
Do you want to modify the complex profile? (Y/[N]) y
->; The complex profile will be modified.
Sorry, command failed: RtnCodeCellSlotNotBootBlocked
// 因为分区0的系统还没有shutdown,所以产生上述错误。
BIB: boot is blocked
首先进行分区0系统的shutdown -ty
等系统关闭后,进入mp状态
[uninitialized] MP:CM>; rs
This command resets the selected partition.
WARNING: Execution of this command irrecoverably halts all system
processing and I/O activity and restarts the selected
partition.
Part# Name
----- ----
0) Partition 0
1) partition 1 ux
Select a partition number: 0
Do you want to reset partition number 0? (Y/[N]) y
->; The selected partition will be reset.
[uninitialized] MP:CM>;
[uninitialized] MP:CM>; cc
This command allows you to change the complex profile.
WARNING: You must either shut down the OSs for reconfiguration or
execute the RR (reset for reconfiguration) command for all
partitions before executing this command.
G - Build Genesis complex profile //清除分区的选项
L - Restore Last complex profile
Select profile to build or restore: g
The genesis complex profile creates one single cell partition.
WARNING: The genesis complex profile automatically ENABLES partition
reconfiguration. This allows partitions to issue platform
reconfiguration commands that could affect other partitions.
Use the PARPERM command to disable partition reconfiguration.
Choose the cell to use.
Enter cell number: 0
Do you want to modify the complex profile? (Y/[N]) y
The complex profile will be modified.
//上述信息表明,分区已经被清除,此时因为原先有两个分区,所以应该还有一个分区
进入mp,用co进console状态,可以看到结果如下,此时表明确实只有一个分区存在:
[uninitialized] MP>; co
Partitions available:
Part# Name
----- ----
0) Partition 0
Q) Quit
Please select partition number:
清除第二个分区:
[uninitialized] MP>; cm // 首先进入cm状态
Enter HE to get a list of available commands
[uninitialized] MP:CM>; rr //其次,resets for reconfiguration
This command resets for reconfiguration the selected partition.
WARNING: Execution of this command irrecoverably halts all system
processing and I/O activity and restarts the selected
partition in a way that it can be reconfigured.
Part# Name
----- ----
0) Partition 0
Select a partition number: 0
Do you want to reset for reconfiguration partition number 0? (Y/[N]) y
->; The selected partition will be reset for reconfiguration.
[uninitialized] MP:CM>; cc // 再次,进入cc状态
This command allows you to change the complex profile.
WARNING: You must either shut down the OSs for reconfiguration or
execute the RR (reset for reconfiguration) command for all
partitions before executing this command.
G - Build Genesis complex profile
L - Restore Last complex profile
Select profile to build or restore: g
The genesis complex profile creates one single cell partition.
WARNING: The genesis complex profile automatically ENABLES partition
reconfiguration. This allows partitions to issue platform
reconfiguration commands that could affect other partitions.
Use the PARPERM command to disable partition reconfiguration.
Choose the cell to use.
Enter cell number: 0
Do you want to modify the complex profile? (Y/[N]) y
->; The complex profile will be modified. //另一个分区被清除
[uninitialized] MP:CM>; co
Unknown Command. Type HE for a list of commands. //此时可以看到结果是分区已经全部没有了
[uninitialized] MP:CM>;
注意点: 分区的操作系统要shutdown
从分区0开始删除
用rr命令,进行resets for reconfiguration
重新安装第一个分区:
命令列表:
BO : Boot a partition.
DATE : Set the time and date
DF : Display FRU information of an Entity.
FW : Firmware Update Utility
DFW : Duplicate Firmware
MA : Return to the Main menu.
MR : Modem Reset
OSP : Online Scan Programming Utility
PE : Power entities on or off.
PWRGRD : Allows user to configure the power grid
RE : Reset entity.
RR : Reset a partition for reconfiguration.
RS : Reset a partition.
SYSREV : Returns all System Revisions
首先在cm状态下,用rs命令
[uninitialized] MP:CM>; rs
This command resets the selected partition.
WARNING: Execution of this command irrecoverably halts all system
processing and I/O activity and restarts the selected
partition.
Part# Name
----- ----
0) Partition 0
Select a partition number: 0
Do you want to reset partition number 0? (Y/[N]) y
->; The selected partition will be reset.
[uninitialized] MP:CM>; ma
[uninitialized] MP:CM>;
MP MAIN MENU:
CO: Consoles
VFP: Virtual Front Panel (partition status)
CM: Command Menu
CL: Console Logs
SL: Show Event Logs
HE: Help
X: Exit Connection
[uninitialized] MP>; co
Partitions available:
Part# Name
----- ----
0) Partition 0
Q) Quit
Please select partition number:
此时,可以看到有分区的存在了
下面将开始安装操作系统的工作:
[uninitialized] MP>; co
Partitions available:
Part# Name
----- ----
0) Partition 0
Q) Quit
Please select partition number: ^
Connecting to Console: Partition 0
(Use ^B to return to main menu.)
- - - - - - - - - - Prior Console Output - - - - - - - - - -
SERvice menu Displays service commands
DIsplay Redisplay the current menu
HElp [<menu>;|<command>;] Display help for menu or command
REBOOT Restart Partition
RECONFIGRESET Reset to allow Reconfig Complex Profile
----
Main Menu: Enter command or menu >;
- - - - - - - - - - - - Live Console - - - - - - - - - - - -
[Read-only - use ^Ecf to attach to console.]
[Read-only - use ^Ecf to attach to console.]
按^Ecf进入到BCH状态,这是 引导控制台处理程序,相当于常说的10秒中断阶段。
[Bumped user - Admin.]
Main Menu: Enter command or menu >; sea all
//查看所有的可引导设备
Searching for potential boot device(s)
This may take several minutes.
重新安装第二个分区:
第二个分区的安装的大体思想是在第一个分区的操作系统启动后,用root用户登录
然后,用命令parcreate -P “partition 1 UX” -c 1:0:0:0 创建第二个分区。
分区创建好后,可以用命令 parstatus 来查看
配置cpu:
在bch状态(10秒中断)进入co
用cpuconfig可以进行管理
Main Menu: Enter command or menu >; co
---- Configuration Menu ------------------------------------------------------
Command Description
------- -----------
BootID [<cell>;[<cpu>;[<bootid>;]]] Display or set Boot Identifier
BootTimer [0-200] Seconds allowed for boot attempt
COreCell [<choice>; <cell>;] Display or set core cell
CPUconfig [<cell>;[<cpu>;[ON|OFF]]] Config/Deconfig processor
DataPrefetch [ENABLE|DISABLE] Display or set data prefetch behavior
DEfault Set the Partition to predefined values
FastBoot [test][RUN|SKIP] Display or set boot tests execution
KGMemory [<value>;] Display or set KGMemory requirement
PathFlags [PRI|HAA|ALT] [<value>;] Display or set Boot Path Flags
PD [<name>;] Display or set Partition name values
ResTart [ON|OFF] Set Partition Restart Policy
TIme [cn:yr:mo:dy:hr:mn:[ss]] Read or set the real time clock
ZLco [ON|OFF] Display or set ZLCO behavior
BOot [PRI|HAA|ALT|<path>;] Boot from specified path
DIsplay Redisplay the current menu
HElp [<command>;] Display help for specified command
REBOOT Restart Partition
RECONFIGRESET Reset to allow Reconfig Complex Profile
MAin Return to Main Menu
进cm,rs选分区1
Vfp就是看分区的引导状态
如果正常就可以安装操作系统了
即 进co,
此时应该是bch状态
sea all 查找可引导的介质
bo p2
安装中的异常事件
如果启动分区的时候,一直停在bch状态不下去,那么要在mp的cm命令状态下rs,做reset的工作,但是还是不行,原因是自动启动的分区设置不对,要用pathflags命令进行设置:
Primary Boot Path Action
Boot Actions: Go to BCH.
首选就到bch了
应该是最次选的启动到bch
Primary Boot Path Action
Boot Actions: Boot from this path.
If unsuccessful, go to next path.
HA Alternate Boot Path Action
Boot Actions: Boot from this path.
If unsuccessful, go to next path.
Alternate Boot Path Action
Boot Actions: Boot from this path.
If unsuccessful, go to BCH.
Configuration Menu: Enter command >; pathflags
Primary Boot Path Action
Boot Actions: Go to BCH.
HA Alternate Boot Path Action
Boot Actions: Go to BCH.
Alternate Boot Path Action
Boot Actions: Go to BCH.
Configuration Menu: Enter command >; pathflags Pri
Primary Boot Path Action
Boot Actions: Go to BCH.
Configuration Menu: Enter command >; pathflags Alt
Alternate Boot Path Action
Boot Actions: Go to BCH.
Configuration Menu: Enter command >; help pathflags
---- PATHFLAGS Help ----------------------------------------------------------
PATHFLAGS displays or sets the boot control flag for each boot path.
The boot control flag setting determines what action should be taken
when booting from the specified path and what to do should the boot
be unsuccessful.
PathFlags Display the boot path flag for each boot path
PathFlags <path>; Display the boot path flag for specified path
PathFlags <path>; <value>; Set the boot path flag for the specified path
<path>; = [PRI|HAA|ALT]
<value>; = 0 Go to BCH (Boot Console Handler)
1 Boot from this path. If unsuccessful, go to BCH
2 Boot from this path. If unsuccessful, go to next
path
3 Skip this path and go to next path
Path Order = PRIMARY ->; HA ALTERNATE ->; ALTERNATE ->; BCH
Short Command for PathFlags: PF
----
Configuration Menu: Enter command >; pf pri 2
Primary Boot Path Action
Boot Actions: Boot from this path.
If unsuccessful, go to next path.
Configuration Menu: Enter command >; pf HA 2
ERROR: Bad Argument(s)
Configuration Menu: Enter command >; pf HA 2
ERROR: Bad Argument(s)
Configuration Menu: Enter command >; pf
Primary Boot Path Action
Boot Actions: Boot from this path.
If unsuccessful, go to next path.
HA Alternate Boot Path Action
Boot Actions: Go to BCH.
Alternate Boot Path Action
Boot Actions: Go to BCH.
Configuration Menu: Enter command >; pf HA Alt 2
ERROR: Bad Argument(s)
Configuration Menu: Enter command >; pf HAA 2
HA Alternate Boot Path Action
Boot Actions: Boot from this path.
If unsuccessful, go to next path.
Configuration Menu: Enter command >; pf Alt 1
Alternate Boot Path Action
Boot Actions: Boot from this path.
If unsuccessful, go to BCH.
Configuration Menu: Enter command >;
Configuration Menu: Enter command >;
Configuration Menu: Enter command >;
Configuration Menu: Enter command >; pf
Primary Boot Path Action
Boot Actions: Boot from this path.
If unsuccessful, go to next path.
HA Alternate Boot Path Action
Boot Actions: Boot from this path.
If unsuccessful, go to next path.
Alternate Boot Path Action
Boot Actions: Boot from this path.
If unsuccessful, go to BCH.
Configuration Menu: Enter command >; ma
---- Main Menu ---------------------------------------------------------------
Command Description
------- -----------
BOot [PRI|HAA|ALT|<path>;] Boot from specified path
PAth [PRI|HAA|ALT] [<path>;] Display or modify a path
SEArch [ALL|<cell>;|<path>;] Search for boot devices
ScRoll [ON|OFF] Display or change scrolling capability
COnfiguration menu Displays or sets boot values
INformation menu Displays hardware information
SERvice menu Displays service commands
DIsplay Redisplay the current menu
HElp [<menu>;|<command>;] Display help for menu or command
REBOOT Restart Partition
RECONFIGRESET Reset to allow Reconfig Complex Profile
----
Main Menu: Enter command or menu >; |
|