双机问题求助?!!!

ericchy

以下是我做模拟同步出错:
Verification to be performed on the following:
        Cluster Topology
        Resources

Retrieving Cluster Topology...


Verifying Cluster Topology...


Verifying ATM Configuration...


Verifying Configured Resources...
WARNING: The service IP label (b_svc) on node node_b is not configured
to be part of a resource group. Therefore it will not be acquired and used as
a service address by any node.

Retrieving Resources from Node: node_a...

Retrieving Resources from Node: node_b...

Performing volume group consistency check.
------------------------------------------

Verifying Resource Group: wis_res
-------------------------

Verifying Resources on each Node...


Verifying SERVICE_LABEL: a_svc
Verifying Volume Group: DB1
ERROR: Volume Group DB1 on Node node_b is configured to auto-varyon.
Verifying Volume Group: DB2
ERROR: Volume Group DB2 on Node node_b is configured to auto-varyon.
Verifying Volume Group: DB3
ERROR: Volume Group DB3 on Node node_b is configured to auto-varyon.
Verifying Volume Group: DB4
ERROR: Volume Group DB4 on Node node_b is configured to auto-varyon.


Verifying Resources across Resource Groups
------------------------------------------


Verifying Connections Services
----------------------------------

Verifying Application Servers
-----------------------------
Verifying Server: wis_app on Node node_a
Verifying Server: wis_app on Node node_b

Verifying Highly Available Communication Links
----------------------------------------------

Verifying Pager Notification Methods
----------------------------------------------

Verifying Fast Connect Services
-----------------------------------

Verifying Cluster Events on Individual Nodes
--------------------------------------------
Verifying Events on Node: node_a
Verifying Events on Node: node_b

Verifying Custom Methods on Individual Nodes
--------------------------------------------

Verifying Custom Events...
Verifying custom events on Node: node_a
Verifying custom events on Node: node_b

Verifying Custom Verification Methods...

No custom verification methods to verify.

Verifying Custom Snapshot Methods...

No custom snapshot methods to verify.

Verifying Cluster Log Directories...
Recommended disk space required for logs (upper limit):
cluster.mmdd            2 MB
cluster.log             2 MB
cm.log                  2 MB
cspoc.log               2 MB
dms_loads.out           2 MB
emuhacmp.out            2 MB
hacmp.out               14 MB


Verifying cluster log directories on Node: node_a
cluster.log      2935268 K disk space left on filesystem.
cluster.mmdd     2935268 K disk space left on filesystem.
cspoc.log        854016 K disk space left on filesystem.
cm.log           854016 K disk space left on filesystem.
dms_loads.out    854016 K disk space left on filesystem.
emuhacmp.out     854016 K disk space left on filesystem.
hacmp.out        854016 K disk space left on filesystem.

Verifying cluster log directories on Node: node_b
cluster.log      2956528 K disk space left on filesystem.
cluster.mmdd     2956528 K disk space left on filesystem.
cspoc.log        1012600 K disk space left on filesystem.
cm.log           1012600 K disk space left on filesystem.


Verifying Custom Disk Methods...

No custom disk methods to verify.

Verifying export files for resource group: wis_res.
------------------------------------------

Verification has completed normally.

Remember to redo automatic error notification if configuration has changed.

cldare: Failures detected during verification.  Please correct
the errors and retry this command.
请教各位,

ericchy

请各位大侠指点

bin52311

查查根目录下面的hosts
还有hacmp安装目录下面的.rhosts看看
不行，就从新配置好了

ibmseller

原帖由 "bin52311" 发表：
查查根目录下面的hosts
还有hacmp安装目录下面的.rhosts看看
不行，就从新配置好了

呵呵，错误原因可不在这里啊  。

gldcan

说得很明白的，
1、service IP label (b_svc)在任何一台机器上都没有配，但是这只是一个warning
2、DB1 DB2 DB3 DB4 都设置成了auto-varyon，要改掉它们，在cluster中，所有的VG都不能是auto-varyon的。这是错误

sturm

Verifying SERVICE_LABEL: a_svc
Verifying Volume Group: DB1
ERROR: Volume Group DB1 on Node node_b is configured to auto-varyon.
Verifying Volume Group: DB2
ERROR: Volume Group DB2 on Node node_b is configured to auto-varyon.
Verifying Volume Group: DB3
ERROR: Volume Group DB3 on Node node_b is configured to auto-varyon.
Verifying Volume Group: DB4
ERROR: Volume Group DB4 on Node node_b is configured to auto-varyon.

在node_b上的vg属性是自动varyon的。把它改为手动即可

jxgcyzdh

原帖由 "ericchy" 发表：

Verifying SERVICE_LABEL: a_svc
Verifying Volume Group: DB1
ERROR: Volume Group DB1 on Node node_b is configured to auto-varyon.
Verifying Volume Group: DB2
ERROR: Volume Group DB2 on Node node_b is configured to auto-varyon.
Verifying Volume Group: DB3
ERROR: Volume Group DB3 on Node node_b is configured to auto-varyon.
Verifying Volume Group: DB4
ERROR: Volume Group DB4 on Node node_b is configured to auto-varyon.

把VG的属性改成不自动mount，其它的warning可以忽略

ericchy

我已经把node_b 上的DB1,2,3,4的auto-varyon关闭,已经可以同步,并OK,但是,WARNING警告的那个b_svc的service address没被配置并不能被任一接点使用,这个WARNING对我的双机有没有影响??

ericchy

tail -f /tmp/hacmp.out出现以下问题:
CNT=107
config_too_long[83] config_too_long[83] expr 107 * 30 + 360
TIME=3570
config_too_long[76] [ 1 ]
config_too_long[78] config_too_long[78] dspmsg scripts.cat 326 WARNING: Cluster wis_ha has been running event 'node_down node_a graceful' for 3570 seconds.\n  Please check event status. wis_ha node_down node_a graceful 3570
MSG=WARNING: Cluster wis_ha has been running event 'node_down node_a graceful' for 3570 seconds.
  Please check event status.
config_too_long[79] /bin/echo WARNING: Cluster wis_ha has been running event 'node_down node_a graceful' for 3570 seconds. Please check event status.
config_too_long[79] 1>; /dev/console
config_too_long[80] sleep 30

这是什么原因导致的呢???